ALPS RS100 10KB Single Slide Fader 20mm shaft Type 4mm bar, Length 128mm

alps-00D2115648119 10kb_denon RSA0N1114A06 single_slide_fader_128mm
ALPS RS100 10KB Single Slide Fader 20mm shaft Type 4mm bar, Length 128mm RSA0N1114A06
ALPS RS100 10KB Single Slide Fader 20mm shaft Type 4mm bar, Length 128mm RSA0N1114A06
All products by ALPS

€35.96 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: RS10010KB Category:
Alps Slide Slide Potentiometer, 10k, B Type ±20%, 0.1W, Line RSA0N1114A06, Without Center Click, compatible with  many mixers RESISTANCE : 10 KB Mono RESISTANCE CHARACTERISTIC : Lin LENGTH out : 128 mm LENGTH route : 100 mm HOLE SPACING : 121 mm LENGTH OF LEVEL( SHAFT HIGH ): 20 mm SHAFT TYPE : 4 mm […]

 

Read more

Alps Slide Slide Potentiometer, 10k, B Type ±20%, 0.1W, Line RSA0N1114A06, Without Center Click, compatible with  many mixers

RESISTANCE : 10 KB Mono
RESISTANCE CHARACTERISTIC : Lin
LENGTH out : 128 mm
LENGTH route : 100 mm
HOLE SPACING : 121 mm
LENGTH OF LEVEL( SHAFT HIGH ): 20 mm
SHAFT TYPE : 4 mm
MOUNTING TYPE : Solder Lug 3 Pin
POWER RATING : 0.1W
Tolerance : ±20%

Fader Slide PotCompatible with Denon – Fits :

 

Weight 0.150 kg

Reviews

There are no reviews yet.

Be the first to review “ALPS RS100 10KB Single Slide Fader 20mm shaft Type 4mm bar, Length 128mm”

Your email address will not be published. Required fields are marked *

Quick Comparison

ALPS RS100 10KB Single Slide Fader 20mm shaft Type 4mm bar, Length 128mm removePIONEER DWG 1519 Cross fader removeNUMARK CDMXF Crossfader Sparepart removePioneer DCS1055 Genuine Potentiometer master/balance djm 600 DJM3000 removePIONEER DAA1307, Genuine Part Older Code DAA1177, Button MIC HI, MIC LOW removeNUMARK VRS10306002 Pitch Fader 10KBM2 remove
NameALPS RS100 10KB Single Slide Fader 20mm shaft Type 4mm bar, Length 128mm removePIONEER DWG 1519 Cross fader removeNUMARK CDMXF Crossfader Sparepart removePioneer DCS1055 Genuine Potentiometer master/balance djm 600 DJM3000 removePIONEER DAA1307, Genuine Part Older Code DAA1177, Button MIC HI, MIC LOW removeNUMARK VRS10306002 Pitch Fader 10KBM2 remove
Imagealps-00D2115648119 10kb_denon RSA0N1114A06 single_slide_fader_128mmoriginal dcs1055 potentiometer
SKURS10010KBDWG1519CDM XFDCS1055DAA1177VRS10306002
Rating
Price€35.96 incl. GR VAT €49.50 incl. GR VAT€24.66 incl. GR VAT €10.84 incl. GR VAT €7.79 incl. GR VAT €8.50 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

In stock

In stock (can be backordered)

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stockIn stockIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentAlps Slide Slide Potentiometer, 10k, B Type ±20%, 0.1W, Line RSA0N1114A06, Without Center Click, compatible with  many mixers RESISTANCE : 10 KB Mono RESISTANCE CHARACTERISTIC : Lin LENGTH out : 128 mm LENGTH route : 100 mm HOLE SPACING : 121 mm LENGTH OF LEVEL( SHAFT HIGH ): 20 mm SHAFT TYPE : 4 mm MOUNTING TYPE : Solder Lug 3 Pin POWER RATING : 0.1W Tolerance : ±20% Fader Slide PotCompatible with Denon - Fits :  

45mm replacement cross fader for Pioneer DJM-600 mixer

 

Crossfader, CD Mix-1/2/3
 

Original Spare Part Pioneer DCS1055, Master Balance Potentiometer DJM600 DJM3000 With center grid. Original spare part rotary SW Knob (MIC EQ HI LOW) for Pioneer:
    • DJM 800
    • DJM 900SRT
    • DJM 900NXS
    • DJM 900NXSW
    • DJM 2000
    • SVM 1000
    • Part No: DAA1307  (replaces the old Part NO: DAA1177
Slide Pot, Pitch Fader, CDN25/33/25+G/30/35/HDCD1 Numark HDCD1 CDN25 CDN25+G CDN30 CDN35 CDN55 Pitch Slide Pot Original Numark Replacement Pitch Slide Pot Fits following units:
  • HDCD1
  • CDN25
  • CDN25+G
  • CDN30
  • CDN35
  • CDN55
Numark part number: VRS10306002 Value: 10KBM2   RESISTANCE : 10 KΒM2 LENGTH out : 60 mm LENGTH route :  mm PCB mountings:  mm SHAFT LENGTH: 20 mm SHAFT TIP : 4 mm 60 mm x 26.5mm x 8mm  
Weight0.150 kg0.10 kg0.01 kg0.05 kg0.10 kg0.01 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.150 kg
Weight 0.10 kg
Weight 0.01 kg
Weight 0.05 kg
Weight 0.10 kg
Weight 0.01 kg

Related products