Content |
- Single-channel receivers (x2) with one XLR output (per unit)
- Adds additional active loudspeakers to your Stealth Wireless System
- he easy-to-use Stealth Wireless system from Alto Professional replaces hundreds of feet of audio cable with a reliable wireless connection. Grow your Stealth Wireless system with the handy Expander Pack, containing two additional single channel receivers.
Build Your Custom Stealth Wireless System
The Stealth Wireless system quickly creates a robust, invisible connection from the output of your mixer to the inputs of your active loudspeakers. Using the Expander Pack, you can additional active loudspeakers to your array to create a larger system, or to provide multi-room coverage. Thereʼs no need to snake, secure, or hide any cabling during set up. After the show, simply disconnect the system and be on your way—no more tedious cable coiling at the end of the night.
Includes:
Stealth Wireless Receivers (x2)
Power supplies (x2)
XLR cables (x2)
M10 screws (x2)
Machine screws (x2)
Hook and loop strips (x2)
User Guide
Safety & Warranty Manual
TECH INFORMATION
RECEIVER Type: Single Channel Receiver
Preset Channels: 16 Channels
RF Frequency:610 - 640 MHz
S/N Ratio: >100 dB/A
RF Sensitivity: -100 dBm
Image Rejection: >70 dB
T.H.D.: < 0.5% ﹫1kHz
LED Indicator: Power On, RF/AF LED Indicator
AF output Impedance: 660Ω balanced
Squelch: 3-step & Pilot Tone
Operation Voltage: 12 VDC,300 mA
Dimensions: 4.58 x 2.74 x 1.24 inches (with antennae)
Weight (each): 4.15 ounces (117.7 grams)
Dimensions (WxLxH): 12.2in x 11.2in x 2.6in
Weight: 2.5 lb
| Specifications WS1000R
- Frequency Range: 790.850 MHz - 813.800 MHz
- Switching bandwith: 0.025 MHz
- No. of channels: 160 (10 groups of 16 CHN)
- Sensitivity: -94 dBm for 30 dB SINAD, typical
- Image Rejection: >60 dB
- S/N Ratio: >105 dB (A)
- T.H.D
- Audio Output Level XLR connector: -12 dBV
- 1/4inch connector: -18 dBv
- Audio Response: 60 Hz - 16 kHz
- Dynamic Range: >95 dB A-weighted
- Dimensions (W x H x D): 212 mm x 45 mm x 160 mm
- Power Requirements: 12-18 V dc at 400mA
|
General Description
Antenna, 490-960MHz, passive, circular polarization
Features
-
High gain
-
Minimized multipath
-
Broadband
Delivery Includes
-
A 5000-CP
-
Adapter BNC to N
-
User manual
|
The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.
Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | Power Consumption | 25 W or less | Input/Output | 4 mixing inputs, 2 distribution outputs | Band-Pass Frequency | 3.0 - 6.0 MHz | Gain | 0 dB (±3 dB) | Infrared Receiver Input | 75 Ω, BNC jack × 4 (Infrared wireless receiver's power source: 24 V DC,
800 mA max. in total of 4 terminals) | Distribution Output | 75 Ω, BNC jack | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Case: ABS resin, black | Dimensions | 210 (W) × 44 (H) × 200.9 (D) mm (8.27" × 1.73" × 7.91“) | Weight | 640 g (1.41 lb) (unit only) | Accessory | AC adapter* …1, AC Power cord (2 m (6.56 ft)) …1,
BNC plug-to-BNC plug cord (50 cm (1.64 ft)) …1, Rubber foot …4 | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-702T
together) |
|
General Description | Antenna front mount for connecting the antennas of EM 100 G2, EM 300 G2, EM 500 G2 receivers or SR 300 IEM G2 transmitters to the front of the rack. To be used in combination with the GA 2 rack mount. | Delivery Includes | | 2 x 50-ohm BNC cables | | Mounting accessories |
|
Technical Data
RF frequency range 470 ..... 870 MHz
Transmission loss 0 dB
Nominal impedance 50 Ohm
RF input BNC
Remarks Booster Feed: 12 V, 70 mA
Mains voltage 100 - 240 V
Mains frequency 50 - 60 Hz
Dimensions 19 ʼʼ, 1U
Weight approx. 3 kg |
Reviews
There are no reviews yet.