BIAMP CMSQ-108 loudspeaker ceiling

Outer flange (grille) diameter | Metric :7-3/8" | 18.62 cm
Cut out diameter | Metric :6-5/16" | 16 cm
Depth from flange | Metric :3-5/8" | 9.04 cm
Driver complement :1-inch (25mm) pivoting Aluminum dome tweeter axially aligned with a 5-1/4" (13.3 cm) BDSS bass/midrange driver
Frequency response :28Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :89 dB
Recommended associated amplifier power :10 - 175 WPC
Inputs :One pair of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker per carton
Warranty :5 years
Weight | Metric :3.7 lb. | 1.67kg each

2-way high-end recessed speaker

This built-in ceiling loudspeaker with particularly high-quality workmanship follows all the major parameters of Magnat´s Quantum technology. Just like the classic home-audio boxes, the ICQ 62 has also been equipped with bass/mid-range cones made from highly stable and torsion-resistant ceramic-aluminium. This material results in extremely accurate reproduction and reveals even the finest of acoustic details.

All the high frequencies are reproduced through a coated fabric dome tweeter delivering highest pulse fidelity and freedom from distortion. Also, a complex crossover is responsible for precisely distributing the high and low frequencies.

 
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
25 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
100 / 180 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 Ohms
Frequency Response
34 – 26000 Hz
Crossover Frequencies
3800 Hz
Recommended Amplifier Output
20 - 200 Watts
Outer Dimensions Ø
220 mm
Cutting Out Ø
193 mm
Mounting depth
98 mm
Weight
1.3 kg

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

The CCM664 features an adjustable, tilt-offset 25mm (1in) soft dome tweeter, and a 150mm (6in) woven glassfibre bass/midrange driver. Quick and easy to install, the speaker also incorporates a three-position EQ switch for a better off-axis response. A cost-effective route to high quality ceiling mount sound.

Outer flange (grille) diameter | Metric :8-5/16" | 21.04 cm
Cut out diameter | Metric :7-1/4" | 18.4 cm
Depth from flange | Metric :3-5/8" | 9.07 cm
Driver complement :1-inch (25mm) pivoting Aluminum dome tweeter axially aligned with a 6-1/2" (16.5 cm) BDSS bass/midrange driver
Frequency response :26Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :90dB
Recommended associated amplifier power :10 - 200 WPC
Inputs :One pair of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Warranty :5 years
Weight | Metric :3.8 lb. | 1.73kg each