BIAMP SDQ-5P-BL Active Speaker (Pair)

No longer available!

286.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: H00AP00030 Category:
SDQ5P is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker. The SDQ5P active loudspeaker is equipped with […]

 

Read more

SDQ5P is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.

The SDQ5P active loudspeaker is equipped with volume and tone controls, accurate clip indicators and a stereo 2 x 30 watts amplifier. This amplifier comes with high quality balanced inputs, a stereo RCA cinch input and a mini stereo jack input (PC, MP3 player …). The balanced input allows long signal line without interference. You will not hear any hum or buzz, because there will be no ground loop issues when connecting the SDQ5P with notoriously difficult laptops, LCD projectors or interactive white boards.

These loudspeakers will give you a variety of sound possibilities when used in conjunction with a flat screen, projector or smart board. With their magnetic shielding these loudspeakers are the ideal and cost effective audio solution for your classroom, boardrooms or meeting room. Due to its stylish design, a seamless integration into every interior is assured.

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “BIAMP SDQ-5P-BL Active Speaker (Pair)”

Your email address will not be published. Required fields are marked *

Quick Comparison

BIAMP SDQ-5P-BL Active Speaker (Pair) removeLD Systems LDRM102SP Roadman 102 Passive Slave Speaker for PA Portable System removeFBT JOLLY J5AW Active Speaker 2-way 120W removeLD SYSTEMS LDRM102HS Roadman 102 Portable PA Sound System incl. Headset 863.100-864.100 MHz removeBEHRINGER CE500A BLACK Active Speakers 50W RMS (Piece) removeBIAMP SDQ-5PIR-W Loudspeaker Design loudspeakerset 5' 2 x 30W with RC, white remove
NameBIAMP SDQ-5P-BL Active Speaker (Pair) removeLD Systems LDRM102SP Roadman 102 Passive Slave Speaker for PA Portable System removeFBT JOLLY J5AW Active Speaker 2-way 120W removeLD SYSTEMS LDRM102HS Roadman 102 Portable PA Sound System incl. Headset 863.100-864.100 MHz removeBEHRINGER CE500A BLACK Active Speakers 50W RMS (Piece) removeBIAMP SDQ-5PIR-W Loudspeaker Design loudspeakerset 5' 2 x 30W with RC, white remove
Image
SKUH00AP00030LDRM102SPFBT00056LDRM102HSE005630H00AP00044
Rating
Price286.00 incl. GR VAT 401.23 incl. GR VAT 259.00 incl. GR VAT 1,122.55 incl. GR VAT140.00 incl. GR VAT338.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentSDQ5P is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker. The SDQ5P active loudspeaker is equipped with volume and tone controls, accurate clip indicators and a stereo 2 x 30 watts amplifier. This amplifier comes with high quality balanced inputs, a stereo RCA cinch input and a mini stereo jack input (PC, MP3 player ...). The balanced input allows long signal line without interference. You will not hear any hum or buzz, because there will be no ground loop issues when connecting the SDQ5P with notoriously difficult laptops, LCD projectors or interactive white boards. These loudspeakers will give you a variety of sound possibilities when used in conjunction with a flat screen, projector or smart board. With their magnetic shielding these loudspeakers are the ideal and cost effective audio solution for your classroom, boardrooms or meeting room. Due to its stylish design, a seamless integration into every interior is assured.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.

The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.

The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Code: 37687 / 37905 White
Configuration: 2 way
Built-in amplifier LF/HF: 80/40 W RMS
Built-in amplifier peak LF/HF: 160/80 W
Frequency response: 80Hz - 20KHz -6dB
Low Frequency woofer: 5 - 1 coil inch
High Frequency driver: 1 dome - 0.75 coil inch
Maximum SPL cont/peak: 113 / 117 dB
Dispersion: 90° x 90° HxV
Input impedance: 22 Kohm
Crossover Frequency: 3.5 KHz
AC Power requirements: 75 VA
Input connector: XLR combo with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 170x275x180 - 6.69x10.82x7.08 mm/inch
Net Weight: 3.4 / 7.49 Kg/lb
Transport Dimension (WxHxD): 240x345x235 - 9.44x13.58x9.25 mm/inch
Transport Weight: 4.2 / 9.25 Kg/lb

pdfQuick Start Guide
pdfUser´s manual

pdfFrequency list
 

LD Systems Roadman 102 HS
Portable PA Speaker with Headset Microphone

 

 

The LD Systems Roadman 102 HS is a mobile and compact sound system with headset

The Roadman 102 HS is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit with headset and beltpack . A second wireless microphone unit are also available in option.

Product type
Battery-powered PA speaker

Type
Set with pocket transmitter and headset microphone

Low/mid driver dimensions
10 "

Woofer Size
254 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
Custom-made

Amplifier
Class D

RMS
80 W

Peak power
320 W

Frequency response
70 - 16.000 Hz

SPL (1W/1m)
95 dB

Max. SPL
115 dB

Protection circuits
short circuit

Controls
Audio-link set (master / slave) , Audio-link slave volume , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Voice priority on / off , Volume Mic 1 , Volume Mic 2

Indicators
Charge/battery status , Power

Media player


Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick

Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD

Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop

Media player display elements
Lighted multifunctional LC display

Line inputs
3

Line input connectors
2 x RCA , Audio-link input XLR, female

Mic inputs
2

Mic inputs
6.3 mm Jack , XLR

Line outputs
3

Line output connectors
2 x RCA , Audio-link output XLR, male

Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Transmission frequency range
863.100 - 864.100 MHz

Speaker output connections
6.3 mm Jack

Operating voltage
transformer

Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)

Rechargeable batteries
2 x 12 V / 4.5 AH

Cabinet material
aluminium , plastic

Cabinet construction
vented

Width
355 mm

Height
610 mm

Depth
315 mm

Weight
19 kg

Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle

 

 

High-Performance, Active 80-Watt Business Environment Speaker System

    * Multi-purpose, 80-Watt, active speaker for commercial indoor installations (restaurants, shops, exhibitions), multimedia, home recording studio and audio/video production
    * Exceptional sound quality, wide dynamic range and ultra-linear frequency range from 60 Hz to 23 kHz
    * Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
    * Integrated limiter for ultimate system control and speaker protection
    * Ultra-low noise Mic/Line input with Volume control and peak LED
    * Additional Line output connector allows linking of additional speaker systems
    * Ultra-flexible wall-mount brackets included
    * High-quality components and exceptionally rugged construction ensure long life
    * Conceived and designed by BEHRINGER Germany


 

For way too long, boardrooms, classrooms and restaurants around the world have had to put up with bad sound. You know, the kind generated by those flimsy "tin-cans-mounted-in-ceiling-tiles” (that no one seems to remember ever having installed in the first place). You can kiss "bad sound” goodbye forever thanks to the great-sounding new CE500A loudspeaker systems from BEHRINGER — and theyʼre available in your choice of black or white.

 

SDQ5PIR is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker. The SDQ5PIR set can be controlled from the included infrared remote control, via serial commands or via the Apart wall control panels (ACP, ACPL or ACPR) which allow control of power and volume. ACPL and ACPR also allow the addition of external audio inputs. Teachers, lecturers or anyone who is giving a presentation can stop worrying about audio system problems and stay focused on their presentation.
Weight4.00 kg14.20 kg4.00 kg24.00 kg14.00 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 14.20 kg
Weight 4.00 kg
Weight 24.00 kg
Weight 14.00 kg
Weight 3.00 kg