Content | 6.5" design two-way loudspeaker black with Clickmount system
The MASK6C low impedance loudspeaker has a unique design and delivers a crystal clear sound for background sound up to dance level music. The cabinet is made of high quality enforced PP4 ABS, with an aluminium grill. The design of the MASK6C ensures high quality and long lasting performance in indoor and outdoor use, even under extreme weather conditions.
The MASK6C has a powerful 6.5” coated paper cone woofer and a 1” silk dome tweeter which results in a high SPL and extremely low distortion. This ensures an unprecedented clarity over the whole frequency spectrum.
The built-in Apart 3-step protection and the high-quality components make the MASK6C an ultra- reliable, fail safe loudspeaker even at high power loads.
Thanks to the revolutionary design of the ClickMount bracket, the MASK6C is without a doubt the fastest and most installer friendly loudspeaker to-date. The pre-defined clicks on the ClickMount ensure a perfect alignment for every loudspeaker. With the discrete cable management system, integrated spirit level and in/out connectors, the full cabling is done on the bracket. To complete the installation simply click the loudspeaker on the ClickMount! | Price per speaker
Specifications :
150 Watts Continuous Power Handling
Professional Drivers and Crossover Network
Included Mounting Bracket
Transparent and Faithful Sonic Performance
Magnetically Shielded Transducers
SonicGuard™ Overload Protection
Available in Black or White Finishes
Frequency Range
(-10 dB)
:
80 Hz to 20 kHz
Frequency Response
(± 3 dB)
:
I00 Hz - 18 kHz
Power Capacity
:
I50 W
Sensitivity
:
87 dB SPL, 1 W, 1 m (3.3 ft)
Maximum SPL
:
108 dB continuous, 114 dB peak
Directivity Factor (Q)
:
6.0
Directivity Index (DI)
:
7.8
Nominal Impedance :
4 ohms
Crossover Frequency :
4.2 kHz
Overload Protection :
Full-range SonicGuard™ power limiting to protect network and transducers
Transducers
LF Drivers :
135 mm (5.25 in) low
frequency loudspeaker
HF Drivers :
19 mm (.75 in) polycarbonate
dome tweeter
Input Connectors :
Spring-loaded terminals
Enclosure
Enclosure Material :
Polypropylene Structural Foam
Finish :
Black (C1Pro) or White (C1Pro-WH)
Dimensions :
235 mm x 159 mm x 143 mm
(9.3 in x 6.3 in x 5.6 in)
Net Weight (each) :
1.8 kg (4 lb)
Shipping Weight (pair) :
4.6 kg (10 lb)
Included Accessories :
Mounting Bracket Assembly
Optional Accessories :
MTC-1A ultra-duty mount bracket
MTC-8 heavy-duty mounting bracket |
AC26
Ultra Compact 2-way Loudspeaker with 2 x 6.5” LF
High output, 2-way loudspeaker systems combining flexibility with high fidelity
Features :
1” Exit Compression Driver with 90° x 90° Coverage PT™ Waveguide
165 mm (6.5 in) LF transducer
Ultra compact enclosure
600W Program
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third part OmniMount® type bracket and stand mount accessory
Specifications :
Frequency Range
(-10 dB): 55 Hz -20 kHz
Frequency Response
(±3 dB): 70 Hz -18 kHz
Power Rating: 300W Cont. Pink Noise
600W Program
1200W Peak
Impedance: 8 ohms
Coverage Pattern: 90° x 90°
Dimensions
(H X W X D): 539.8 x 199.4 x 226.1mm
(21.3 x 7.8 x 8.9in)
Weight: 11.0 kg
(24.3 lb)
|
The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
Roadboy 65 passive slave speaker unit - 30 W RMS
- 120 W Peak
- 3.6 kg
|
Reviews
There are no reviews yet.