Content |
- Speaker Diaphragm For XT20 Xenith Cadence / St44 Hertz , TW46 Pyramid
-
Replacement for several Speaker brands
-
Voice coil: 1.74" (44.4mm)
-
Outer Diameter: 86.00 mm
-
Impedance: 8 ohm, DCR: 6.2 ohm
-
Titanium
-
Fits Driver and Cabinet Models:Varius
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
ST44DIA |
VC Diameter |
44.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
CCAR/ALR/SV |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
86 mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
| Original JBL D8R2431 Diaphragm to repair the 2431H Driver (339894-002X). 8 ohm
Diaphragm Comes with Ferrofluid and Allen Key.
Here is the list of some cabinet model use:
AE Series: AM6200/64-WH, AM6200/95-WH, AM6212/00-WH, AM6212/64-WH, AM6212/95-WH, AM6215/64-WH, AM6215/95-WH, AM6315/64-WH, AM6315/95-WH, AM6340/64-WH, AM6340/95-WH
Precision Directivity Series: PD5200/43-WH, PD5200/64-WH, PD5200/95-WH, PD5212/43-WH, PD5212/64-WH, PD5212/95-WH, PD5322/43-WH, PD5322/64-WH, PD5322-95-WH, PD743, PD764
SRX Series: SRX712M, SRX715/F, SRX738/F VLA Series: VLA301, VLA301H, VLA601, VLA601H, VLA901, VLA901H
Vertec Series: VT4888, VT4888DP-AN/CN/DA |
Replacement diaphragm kit for 44XT™driver
Impulse 1582, HV1582, DTH 4115, DTH 4215, DTH 4210, DTH4115F, DTH 4215F, DTH 4210F, DTH SM Left, DTH SM Right, SP1G,ILS 1564V, SP1X, SP7X, ILS 1564H, ILS 1594V, ILS 1594H,ILS 1264V, QW ML, QW MR, SP7G, ILS 1264H, ILS 1294H,ILS 1294V, QW 1, QW 2, QW 2F, QW 4, QW 4F, Q Factor 2212, SSE 1595
|
- JBL D8R2406 is a genuine JBL replacement diaphragm for the 2406H-1 Driver.
- Fits JBL MPRO 400 Series
- 8 Ohm
|
Reviews
There are no reviews yet.