| Content | Audient Nero
Monitor Controller
4 sources selectable:
- 2 x Stereo Line Level Inputs (6.3 mm jack)
- 1 x Stereo Cue Mix Inputs (6.3 mm jack)
- Alt Inputs (3.5 mm mini jack, stereo RCA optical or coaxial S/PDIF inputs)
3 x Stereo Monitor Outputs
Switchable subwoofer output
4x headphone output; built-in talkback microphone
XLR input for external talkback microphone
Dim, cut, mono & polarity function
LED level meter
Dimensions: 320 x 180 x 100 mm
Weight: 2.2 kg | Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
|
MC3.1 - Monitor Controller Hear the music - not the equipment! Building on the success of the MC2.1, the MC3.1 Monitor Controller is just as accurate and transparent and of the same build quality. It can still faithfully reproduce what has been recorded without colouring the sound, but comes with a much expanded feature set, including more inputs, better control, extended channel routing and a desk top \'wedge\' form factor. Additions include a combined digital AES/SPDIF (24 bit/192kHz) input, giving a total of 5 individually switchable sources, including a front panel auxilary input with level control for the easy connection of your mp3 player, smartphone or tablet. Full cue mix facilities, with level control, provide separate source selection for main or cue outputs and the two headphone amplifiers, so the artist can listen to a completely different mix to the engineer, for example. A dedicated cue mix output is also available. A secondary preset volume control on the front provides repeatable calibrated output level for the monitors, so that at the flick of a switch the engineer can hear the mix at the same predetermined volume, time after time, without having to meticulously adjust controls. The MC3.1 incorporates three stereo balanced speaker outputs, plus a dedicated mono speaker/sub-woofer output each with individual left/right trims under the unit to provide complete control over level matching. Furthermore each can be switched individually and simultaneously and in any order. You can listen to multiple speakers with the same sub-woofer, or turn the sub-woofer off altogether. Other improvements include additional mix checking capabilities, which now incorporate low, mid, high solo switches to hear how the lows bleed into the mid, or the stereo width of each, for example, and also the ability to swap the left and right channels. The talkback has been expanded to include an external mic in addition to the internal, and footswitch operation. Can you trust the audio that your current monitor controller is providing? Is it colouring the sound? For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller. - Ultra low noise and transparent circuit design.
- Source switches for both Main & Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI & 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel & 1 3.5mm Front Panel Aux.
- 3x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching.
- Timed relay protection on all speaker outputs to prevent power up/down bangs.
- Volume can be set via the Variable Front Panel Knob or a Preset Control. Each has parallelled custom quad pots for excellent channel matching and smooth feel.
- 2x Headphone Amplifiers with Individual Level Controls & Switching between Main & Cue Inputs so the Artist can listen to a Different Mix to the Engineer.
- Front Panel 3.5mm AUX Input & Level Control for connecting MP3 player, smartphone or tablet etc.
- Cue Level Control adjusts the volume for the Artist\'s Monitors.
- Built In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, a Mono Output Jack & Internal Routing to Headphone and Cue Outputs.
- Comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L/R Mute; Phase Reverse and more, help check every aspect of your Mix & Provide Ultimate Control.
- Desktop \'wedge\' form factor.
- Kensington security slot (also called a K-Slot or Kensington lock).
- Rugged steel chasis and stylish brushed aluminium cover.
|
Bluetooth In.
Balanced Audio Out.
Turn any professional speaker into a Bluetooth speaker!
Convenience
Ditch the adapters.
Kali Audio’s MV-BT lets you use your Bluetooth devices with professional speakers, mixers, controllers, and interfaces. Just pair your device by pressing the Kali logo on the front, and use your preferred balanced connector to connect to your system.
Pairing Button
Press the Kali logo to pair.
LED Display
Blue light indicates volume level.
Weighted Knob
Enjoy precise control over the volume level at your fingertips. Volume control is independent, so you can leave volume on your device at full.
Balanced Outputs
Connect to speakers, mixers, controllers, or interfaces with whatever cables you already use.
Specifications
| |
|---|
| Channels: |
2 |
| Inputs: |
Bluetooth, 3.5mm (AUX) |
| Outputs: |
2 x XLR, 2 x TRS |
| Height: (Shipping) |
80mm (84mm) |
| Length: (Shipping) |
134mm (138mm) |
| Width: (Shipping) |
130mm (154mm) |
| Weight: (Shipping) |
.5kg (.6kg) |
| In the Box: |
MV-BT, Local Power Wall Wart |
| Master your domain with the Behringer Xenyx CONTROL2USB studio monitor controller. Whether recording, mixing, or mastering, the CONTROL2USB places you firmly in command with master volume, talkback, source selection, and monitor control. Easily toggle between up to three sets of studio monitors and four stereo input sources. There's even a monitor mix input for your DAW! Keep the lines of communication open between you and the artist with the built-in talkback function. Mono, mute, and dim functions are right at your fingertips. The CONTROL2USB employs VCA technology, ensuring precise level adjustments. The infinitely useful Behringer Xenyx CONTROL2USB studio monitor controller also functions as a USB audio interface.
Behringer Xenyx CONTROL2USB Studio Monitor Controller at a Glance:
- Ample I/O provides monitor options galore
- VCA technology ensures precise level adjustments
- Convenient built-in USB audio interface
Ample I/O provides monitor options galore
Your mix isn't complete unless it sounds great in the studio, car, and on bass-challenged speakers and earphones. The Behringer Xenyx CONTROL2USB toggles between up to three sets of studio monitors, equipping your studio with monitor options galore. Utilize high-quality nearfields to get your mix started. Add or remove a subwoofer to check your low end. Then reference your mix with cube-style speakers. There's also a monitor mix input for your DAW. A pair of individually adjustable headphone outputs provides even more monitoring flexibility. The CONTROL2USB accommodates up to four stereo input sources, so setting up reference sources is a piece of cake.
VCA technology ensures precise level adjustments
Because it employs high-end Voltage Controlled Amplifier (VCA) technology instead of inexpensive resistive faders, the Behringer Xenyx CONTROL2USB is incredibly precise. The engineers at Sweetwater have found that you can set levels quickly and accurately with the CONTROL2USB's large control knob. Make minute adjustments with ease. The CONTROL2USB actually controls the voltage that drives the amplifier rather than simply controlling how much signal passes to it. The result is faithful sound reproduction that you can trust.
Convenient built-in USB audio interface
The Behringer Xenyx CONTROL2USB's built-in USB audio interface creates an excellent centerpiece for your studio without requiring additional hardware or drivers. Just plug into one of your computer's spare USB ports and get to work.
- Volume controller, source selector, monitor switcher and talkback in one device
- Large, illuminated volume knob
- Integrated USB audio interface
- 4 stereo inputs with independent level
- Additional monitor mix input for DAW
- 3 independent and adjustable stereo monitor outputs
- Mono, mute and dim function
- Built-in talkback microphone
- With phono preamp for record players
- 2 Separately adjustable headphone outputs
- 12-Segment LED display with input / output switch
- "Planet Earth" power supply, 100 - 240 V
- Depth (mm): 198
- Height (mm): 87
- Width (mm): 389
- Product Dimensions (mm): 87x389x198
- Net weight (kg): 2.4
- Colour: Black
- Packing: Retail Box
- Weight (kg): 2.4
|
MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.
\"Fully passive\" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4\" TRS connectors, one with both unbalanced RCA and unbalanced 1/8\" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4\" TRS plus unbalanced 1/8\" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!
Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.
Features
- 2x mono balanced 1/4\" TRS input (input A)
- 2x mono unbalanced RCA input (input B)
- 1x stereo unbalanced 1/8\" mini jack input (input B)
- 2x mono balanced XLR output (output A)
- 2x mono balanced / unbalanced 1/4\" TRS output (output B)
- 1x stereo unbalanced 1/8\" mini jack output (output B)
- selected high quality potentiometer for passive volume control
- A/B input selection switch
- L/R switch to swap left & right audio channels
- independent A and B buttons to enable and disable the outputs
- mono downmix button (mixes left to right channel and right to left channel)
- mute button to mute output signal instantly
|
Reviews
There are no reviews yet.