| Content | D2320_MANUAL_GB_V1.pdf
• Mic input with Comp/Limit
• USB Player with pitch control
• Display with ID3 Text
• Direct MP3 / Phone input
• 2 Masters & Monitor outputs
Compact 6.2 is the ideal mixer for sport instructors. It has 2 microphone inputs with built-in compressor limiters and high-pass filters. This will help the instructor to have the correct level and perfect intelligibility. Dynamic range will be extended and distortion will be eliminated. It has one selector to choose the audio source which can be the internal USB mp3 player, the front input or 2 line inputs at the back panel. The MP3 player has ID3 text and can be pitched which is ideal for fitness, spinning and all kinds of group work outs. The front input can be used for a normal line level but also can be switched into a special Phone mode which adjusts the input sensitivity into the correct value for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. It has 2 master outputs with separate volume controls which can be locked and a separate monitor volume especially for the instructor. All technical settings like EQ, Gain, Phantom Power, Compression & Treshold are on the backside of the unit to be set by the installer. Now the instructor only has to set his source and mic level and doesn't need to worry about difficult settings. The Compact 6.2 is an all-in-one solution for your sport instructor, it's easy in use and has all features which are needed to give a work out instruction without worrying about anything else but the audience.
Specifications
Input channels: 2 x Microphone, combo XLR/Jack 2 x Line, RCA, 1 x Phone, 3,5mm jack / RCA
Output channels: 1x Master A RCA, 1x Master B, Balanced XLR & RCA, 1x Monitor RCA
USB supported format: FAT up to 16Gb
Audio format: MP3 128kbps, 192kbps, 224kbps, 256kbps, 320kbps
Master EQ: 80Hz, 2,5KHz, 12KHz, -6dB / +6dB
Frequency response: 20Hz - 20Khz
T.H.D.: |
- 6 input channels
- MIC (XLR3) inputs on channels 1 and 2
- MIC (JACK ¼”) / stereo LINE (RCA) in channels 3 and 4. Input signal pushbutton selector (MIC/LINE) on back panel
- Stereo LINE (RCA) on channels 5 and 6
- Input signal gain level control (accessible only with screwdriver)
- Each channel features signal present (SP) and CLIP indicators
- General phantom power switch located on back panel. Independent internal phantom power assignment to any MIC input
- Triple tone control (accessible only with screwdriver)
- 2 main stereo OUTPUTS (XLR3) with independent volume control
- 3 LED OUTPUT level meter
- Input channels can be routed to any main output (A,B) or both
- 2 additional stereo REC outputs (REC1, REC2)
- Mono mode selector in outputs A and B
- Headphones monitoring of selected output (A or B)
- Integrated, internally configurable talkover. Affects OUT A and REC A
- Remote MUTE function (PHOENIX) allows linking to external fire detection centrals
- TALKOVER function fully configurable to –20dB or –30dB that affects boths outputs A and REC A
The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.
Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.
SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.
SAM series general KEY features
- Universal 1 RU, 19” installation mixers
- Excellent frequency response
- Balanced MIC and stereo LINE inputs and main outputs
- Reliable proprietary power supply
- Ideal for any application requiring a trouble free mixer
| Since 1984 the SCLAT mixing desks have been rocking thousands of class venues around the world, serving the most demanding technicians, the most creative pro-Djs and the most exciting dance floors.
Behind the renowned experience of ECLER Laboratories, the SCLAT 200vs keeps combining all the requirements technicians demand regarding features and operating safety together with the inventive functionality Professional DJs demand from a high-end mixing desk.
Designed to optimize the best high-end club P.A.s, featured to fit any studio recording standard, built to withstand the most demanding mobile touring set-ups, the SCLAT 200vs is probably the best quality Audio Mixing Desk presently available in the Industry.
Superior effects processor
Remix live...
Built-in processor with double DSP featuring 2 manual filters and 10 effects with BPM synchronization. Includes a DRY/WET crossfader taking your effects control to the next level: activate and deactivate, fade in to the level of your choice… Allows routing every single channel to the module independently. Features control of TIME and PARAMETER and a friendly user selectable panel. Effects consists of LFO Filter, Low Pass Filter, High Pass Filter, Delay, Reverb, Flanger, Phaser, Vocoder, Pitch Shifter, Echo Reverb, Filtered Echo and Flanger Echo.
Midi out
Control you favorite devices...
The module includes a MIDI output and features start and stop commands to activate and deactivate your devices and a clock to adjust the tempo.
Edi:lab software
Expand your creativity...
The built-in effect processor is reprogramable in real-time with the edi:lab software (included). The user can load a new effect set-up in the SCLAT mixer and play it stand-alone without any need of the computer. An effect library is available in the edi:lab software in order to save the different user set-ups. | Xone:96. The long-awaited follow-up to a genuine club classic.
A new, uncompromising analogue DJ mixer, destined to be the heart of your creativity, Xone:96 takes the legendary soul of the acclaimed Xone:92 and redelivers it, enhanced, and with state-of-the-art digital connectivity.
It’s all here. The huge, detailed, space-shaking analogue sound that only Xone delivers. A refined, precision 4-band EQ. Unrivalled dual Xone:VCF filters with CRUNCH harmonic distortion. And a dual 32-bit USB soundcard (24 Channels @ 96kHz) with Traktor Scratch certification right out of the box.
Xone:96 lets you connect your whole rig, from laptops and turntables, to pedals, synths and drum machines.
Two dedicated FX sends, four stereo input channels (with 4-Band EQ), two stereo input channels with all new 3-Band Parametric EQ + two auxiliary stereo return channels. And a separate master insert for your outboard hardware.
Explore new possibilities with a familiar layout of beautifully tactile controls. And rely on the industrial build quality that exceeds the demands of relentless back-to-back performances, night after night.
Xone96: You mixed. We listened.
- Type Analogue
- Channels 6 + 2
- EQ
Channel 1-4, 4-Band EQ
Channel A-B, 3-Band Parametric EQ
- USB Soundcards Dual 24 Channel (12 in / 12 out)
Hi-Speed USB2.0 / Mac Class Compliant
32bit / 96kHz
MIDI over USB
- Line Inputs 4 x RCA (CH 1-4)
4 x 1/4″ TRS (CH A-D) Mono/Stereo
- Phono Inputs 4 x RCA (CH 1-4)
LN/PH Switch for DVS
- USB Inputs 6 x USB (CH 1-4 + CH A – CH B)
- Mic Input 2 x XLR
- Master Output 1 x XLR (Balanced)
- Master 2 Output 1 x 1/4″ TRS (Balanced)
- Booth Output 1 x 1/4″ TRS (Balanced)
- Record Output 1 x RCA (Un-balanced)
- Master Insert 1 x 1/4″ TRS
- MIDI Out 1 x 5-Pin DIN
- Send/Return I/O
2 x 1/4″ TRS Send
4 x 1/4″ TRS Return
1 x LN/Hi-Z Switch (SND1/RTNA)
- Filter
2 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A-B
CRUNCH (Controlled Harmonic Signal Distortion)
- X-Link 1 x RJ45
- Headphones
2 x 1/4″
2 x 3.5mm
Split Cue Monitoring
- Channel Faders 60mm VCA / Replaceable
- Chanel Meters 9 Segment LED
- Channel Fader Curve 3 Types
- X-Fader InnoFADER / 45mm VCA / Replaceable
- X-Fader Curve 3 Types
- Earth Ground Terminals x 2
- Headroom 20dB
- AC Mains
100 to 240V
AC 50/60Hz
Consumption 45W max
- Mains Adaptor 3 pin IEC socket
- Height 109mm / 4.3″
- Width 336mm / 13.25″
- Depth 410mm / 16.2″
- Weight 7kg / 15.4 lbs.
| DIGITAL PRO MIXER DDM4000 Ultimate 5-Channel Digital DJ Mixer with Sampler, 4 FX Sections, Dual BPM Counter and MIDI
- 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 patented* BPM counters, digital crossfader and MIDI
- 4 Phono/Line stereo channels allowing max. 8 signal sources to be connected simultaneously
- 2 Microphone inputs with Gain, EQ, Talk function and FX
- 4 stereo channels with Gain, programmable parametric 3-band EQ with Kill function, fader curve control and flexible crossfader assignment
- Sophisticated sampler with beat-controlled loop function, real-time pitch control, sampler FX and crossfader start option
- 2 freely assignable and BPM-synchronized, high-quality FX engines (Bitcrusher, Resonator, Reverb, Flanger, etc.)
- Ultra-fast, accurate and patented* BPM counters for automatic BPM synchronization of sampler, FX, crossfader and external drum machines, etc. via MIDI
- Digital crossfader with flexible curve adjustment, reverse button and automatic, BPM-synchronized crossfading
- Dual-mode crossfader with innovative frequency-selective crossfading
- Dedicated Headphone section includes PFL Mix/Split and Bass/Snare boost functions
- Recall your last mixer setting at the push of a button
- Digital S/PDIF output for direct recording of your performance
- Rack mount brackets included for ultimate flexibility
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
- * U.S. Patent No.: 6812394 / German Patent No.: 102 23 735
|
The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.
The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.
Massive FX Library
Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.
FX Cascade
The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.
Editable FX Parameters
Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.
Input Matrix
Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.
Trimodal EQ
Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.
Mic/Line Input
With 2 band EQ, gain, cue and mix level and with full access to FX.
High Visibility OLED Display
The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.
Lightweight chassis
DB2's lightweight aluminium chassis is designed to make touring with the console easy.
Integral soundcard
The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.
MIDI control
All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.
X:LINK
X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.
Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option
Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade uses 100% conductive plastic tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.
|
Reviews
There are no reviews yet.