Content | • Gain settings at backside
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 2 Mic, 11 Line inputs
The IMIX-7.3 is a compact installation mixer with zone control. It has exact the same functionality as the IMIX-7.1 but each input on the IMIX-7.3 can be routed to the desired output. This function makes it possible to control 3 areas with different music, sound level and EQ settings.
Specifications Input channels: 2 x Microphone, combo XLR/Jack
11 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master Balanced, XLR
1 x REC output, RCA
1 x Headphones, 6.3mm Jack
Master EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Mic EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: |
| *video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal *possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other great additional functions *video switching function possible to set off & select condition of all output image *switch locking function to protect false-operation vams-0808 allows various setting modes. so it is very easy to happen the alternation of fixed selection mode. to prevent false-operation it you may set a locking mode *high frequency feature and low cross talk (?0.5db)frequency feature and cross talk are the most important factor in video / audio matrix switcher. vams-0808 has wide band audio & video high frequency response and low cross talk at excellent function *visible in/out display condition very convenient display of each out / in video & audio source *parallel connection function allows system extension to multiple sets *audio/video input & output with a/v thermal noise protection | | | | | VIDEO | Video Input | VS or VBS 1.0Vp-p 75Ω, 8CH, BNC | Video Output | VS or VBS 1.0Vp-p 75Ω, 8CH, BNC | Frequency Response | Below ±0.5dB(7MHz) | S/N | -60dB | Crosstalk | -60dB | Audio | Audio Input | 2.2Vp-p, High Impedance Unbal/RCA | Audio Output | 2.2Vp-p, High Impedance Unbal/RCA | T.H.D | Below 0.1(20Hz-20kHz) | Frequency Response | Below -3dB | S/N | 90dB | Crosstalk | -90dB | CONTORL CPU MICOM | Interface | RS-232C | Operating Temperature | -10℃~+40℃ | Storage Temperature | -20℃~+60℃ | Operating Humidity | Below 90% RH | Power Source | 100-120VAC or 220-240VACl 50/60Hz | (supplied AC mains transformer depends on country requirements) | Weight | 5kg/11lb | Dimensions | 482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in | | | |
| Χαρακτηριστικά:Inputs:Gain-Sharing Automatic Mic Mixing Eight XLR Inputs with Level controls & Sig/OL indicators Each can be Mic, Mic with 48V phantom, or Line-level Add up to 64 more gain-sharing inputs by cascading AM2 Automixers Add other audio sources, line inputs and remote controls by connecting to HAL systemOutputs (all mono)XLR Main with Mic/Line switch, Level control & Sig/OL Rane RAD and Cascade IN RJ-45 Ports Cascade In Port connects up to seven additional Rane AM2 mixers, (eight units total) RAD Port may send Output to HAL (DSP/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share |
The JBL Commercial CSM-21 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-21 features two stereo music inputs with gain control and clip LEDs, and one stereo output with an active crossover and a dedicated subwoofer output. |
The JBL Commercial CSM-32 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-32 features three stereo music inputs with gain control and clip LEDs, and two stereo outputs with active crossovers and dedicated subwoofer outputs. | The Compact 9.2 1U installation mixer is built to combine maximum audio possibilities and needs for a pub, school, or public area without scarifying on the ease of use. The user can adjust 3 microphone levels and 2 line levels. Both line levels have 6 selectable input sources which are shown on a clear display. On each line input it is possible to select a pre-programmed label which is shown on the display, so there is no need to do difficult programing. This will help users to select the desired source for the desired area, because the Compact 9.2 also has 2 individual zones. All gain, EQ, phantom power and technical settings are on the backside. Once the installer has set everything correctly the user doesn't need to worry about difficult settings, only volume and source select are available on the front panel. The front panel also has a special input if you like to connect a device instantly. This input can be switched between line and phone mode. The phone mode adjusts the input sensitivity into the correct value for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. The Compact 9.2 is the perfect solution for situations where non-technical users need to operate professional audio systems.
Specifications
Input channels: 3 x Microphone, combo XLR/Jack
6 x Line, RCA
1 x Phone, 3,5mm jack
Output channels: 2 x Master Balanced, XLR
Master EQ: 80Hz, 2,5KHz, 12KHz, -6dB / +6dB
Frequency response: 20Hz - 20Khz
T.H.D.: |
Reviews
There are no reviews yet.