| Content | • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8
The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications.
The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions.
TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
Mono input channels, line
6
Mono line input connectors
2 x 6.3 mm TS
Mono line input type
Electronically balanced
Stereo Line Input Channels
1
Stereo Line Input Connectors
2 x XLR
Stereo Line Input Type
Electronically balanced
Input impedance
(balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s)
Max. input level
+ 21 dBu
Nominal working level
-10 dBV - +4 dBu
Mono output connectors
2 x 6.3 mm TS
Mono output type
Electronically balanced
Stereo output connectors
1 x XLR
Stereo output type
Electronically balanced
Output impedance
(balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s)
Max. output level
+22 dBu
Frequency response
5 - 40000 Hz
Controls
Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6
Indicators
In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Mains connector
IEC power connector
Accessories (included)
Power cord
|
The MZ-372 allows multiple audio sources (19 total) to be mixed, muted, and routed to 2 redundant outputs, controlled by familiar volume sliders and assignment buttons. Input signals can be inserted via 6 audio channels, each consisting of 2 sets of unbalanced RCA stereo pairs, and 6 XLR inputs for a total of 12 sets of RCA inputs and 6 XLR inputs. In addition, channels 2/3/4 can be set to accommodate phono-level signals for use with a turntable. Lastly, and located conveniently on the front panel, one additional XLR input is available driving a studio quality mic preamp and ducking circuit for easy voiceover and announcement work.
Multiple Zone Outputs
Twin outputs each feature a combination of balanced XLR or RCA unbalanced connectors for easy integration into virtually any audio system. This flexibility allows combinations of microphones, CD/DVD/Blu-ray players, instruments - or any other audio source - to be selected or muted, and sent simultaneously to the dual outputs, each with it’s own volume control. Finally, the convenient "Talkover” function will automatically lower any mixed channel source so the microphone connected to the front panel can easily be can be heard in whichever zones you choose.
Easy, Immediate Control
Familiar volume sliders, switches/buttons, EQ knobs, and mute buttons make the MZ-372 simple and fast to operate and set up. There is even a master recording stereo output, which can send audio to an external recorder which makes event or music performance capturing easy. The Booth outputs provide another stereo feed with independent control for additional monitoring.
- Maximum flexibility for audio routing, input selection, and multiple redundant output flow, perfect for integrator, musical instrument, and residential applications
- Multiple inputs include 12 sets of stereo RCA-type, 6 selectable mic/line XLR, and a dedicated front-panel XLR mic input; 19 total input "sets”
- Channel audio sources can easily be selected, muted, and contoured via simple volume sliders, toggle switches/buttons, and knobs
- Two redundant output channels each with stereo XLR balanced and unbalanced RCA-type connectors; each with separate volume control
- Separate stereo booth, recording, and headphone outputs each with independent control
- One additional mic-compatible XLR input on the front panel with "Talkover” function automatically lowering source audio
- Independent three-band EQ per each of the 5 channels and a two-band EQ on the additional front panel microphone input
- Compact 3U rack mount design
|
Power Output Level R-150 PLUS
STEREO
8ohm(T.H.D 0.05%) 50W+50W
4ohm(T.H.D 0.05%) 75W+75W
BRIDGED MONO
8ohm(T.H.D 0.05%) 50W
8ohm(T.H.D 0.5%) 170W
Frequency Response 20Hz- 20kHz, ±0.5dB
Convection Cooled
SoftStart Protection System
Balanced 10kΩ@0.775V Inputs
| REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 80 watts output power @ 4 ohms, but the unit is also bridgeable to 8 x 160 watts @ 8 ohms. This 3 rack units high amplifier with very high channel separation also has a dual analog power supply with toroidal power transformers. The standby power consumption is very low, less than 0.5 watts!
Another smart feature of the REVAMP1680 is the switching mode standby power supply with multiple auto power on/off options. You can power on or power off the unit via a trigger input, audio sense... The trigger input is ideal when you want to switch on the power amplifier automatically using an external AC or DC trigger signal coming from your audio system. The amplifier will be switched on as long as the trigger voltage is present. Alternatively, you can set the power on mode switch to the audio trig position: the amp will automatically switch on when a sufficiently strong audio signal is present at the input and automatically switch off after a few minutes of silence.
This amplifier is equipped with 2 stereo bus inputs with pass through. These bus inputs are ideal when you want to hear the same audio signal in different output zones with the advantages you need less audio cables and the installation can be done very fast.
With its very low standby consumption and the fact the amplifier can easily be integrated in any audio project, the REVAMP1680 will soon become your favourite multi channel power amplifier. |
| | *video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal *possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other great additional functions *video switching function possible to set off & select condition of all output image *switch locking function to protect false-operation vams-0808 allows various setting modes. so it is very easy to happen the alternation of fixed selection mode. to prevent false-operation it you may set a locking mode *high frequency feature and low cross talk (?0.5db)frequency feature and cross talk are the most important factor in video / audio matrix switcher. vams-0808 has wide band audio & video high frequency response and low cross talk at excellent function *visible in/out display condition very convenient display of each out / in video & audio source *parallel connection function allows system extension to multiple sets *audio/video input & output with a/v thermal noise protection | | | | | | VIDEO | | Video Input | VS or VBS 1.0Vp-p 75Ω, 8CH, BNC | | Video Output | VS or VBS 1.0Vp-p 75Ω, 8CH, BNC | | Frequency Response | Below ±0.5dB(7MHz) | | S/N | -60dB | | Crosstalk | -60dB | | Audio | | Audio Input | 2.2Vp-p, High Impedance Unbal/RCA | | Audio Output | 2.2Vp-p, High Impedance Unbal/RCA | | T.H.D | Below 0.1(20Hz-20kHz) | | Frequency Response | Below -3dB | | S/N | 90dB | | Crosstalk | -90dB | | CONTORL CPU MICOM | | Interface | RS-232C | | Operating Temperature | -10℃~+40℃ | | Storage Temperature | -20℃~+60℃ | | Operating Humidity | Below 90% RH | | Power Source | 100-120VAC or 220-240VACl 50/60Hz | | (supplied AC mains transformer depends on country requirements) | | Weight | 5kg/11lb | | Dimensions | 482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in | | | |
|
Reviews
There are no reviews yet.