• Built-in amplifiers & dynamics • HiFi Sound quality • Adjustable subwoofer level • Phase invert switch The Clubmate I has two 6,5/1″ satellites and a 12″ subwoofer with built-in amplifier. Satellites are equipped with neodymium high drivers and a special wave guide for frequencies up to 20Khz. The built-in dynamics will protect the system […]
The Clubmate I has two 6,5/1″ satellites and a 12″ subwoofer with built-in amplifier. Satellites are equipped with neodymium high drivers and a special wave guide for frequencies up to 20Khz. The built-in dynamics will protect the system and speaker drivers against overload and will give an excellent frequency response at any sound level. The set is finished with scratch resistant paint and stylish metal grills. Clubmate I is ideal for small partys schools, practice rooms and exhibitions
The Club Mate 12 & 15 together with Soundmate III are upgraded into Clubmate I, II and III systems. Besides the improved sound quality the looks are also upgraded due to stylish metal grills. Together with the new scratch resistant finish and reduced weight (10-25%) makes these sets road-proof. The Clubmate sets are especially designed for the mobile DJ’s, where a powerful bass is required as well as a smooth mid–high frequency response. The 12″ and 15″ subwoofers have a long linear cone excursion to ensure minimal distortion and high power levels as well as getting a higher maximum sound pressure. Special attention is given to the power ratings of the subwoofers and satellites as well as the behaviour of all the independent dynamic compressors and limiter circuits inside. The club mate sets are easy to set-up also for non-technical users.
Specifications Subwoofer:
Amplifier output low: 350W RMS at 8 Ohm
Amplifier output high: 2x 120W RMS at 8 Ohm
Freq. Response (-3 dB): 47- 125Hz
Crossover Frequency: 125 Hz, 24 dB/Oct BW
Efficiency (Half Space): 100 dB / W / m
Peak. SPL at 1 m (Theoretical): 125.4 dB
S/N Ratio: >100dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (WxHxD): 450 x 510 x 600 mm
Weight 26.0 kg
Satellites:
Drivers: 6,5″ / 1“
Freq. Response (-3 dB): 125-20.000Hz
Crossover Frequency: 3300 Hz, 12 dB/Oct
Efficiency (Full Space): 95 dB / W / m
Peak. SPL at 1 m (Theoretical): 115.8 dB
Nominal Dispersion (HxV): 90° x 60°
Dimensions (WxHxD): 240 x 388 x 245 mm
Weight: 6,4 kg
Weight
6.40 kg
Reviews
There are no reviews yet.
Be the first to review “DAP AUDIO D3263 Club Mate I 12″ Compact active speaker set” Cancel reply
The Clubmate I has two 6,5/1" satellites and a 12" subwoofer with built-in amplifier. Satellites are equipped with neodymium high drivers and a special wave guide for frequencies up to 20Khz. The built-in dynamics will protect the system and speaker drivers against overload and will give an excellent frequency response at any sound level. The set is finished with scratch resistant paint and stylish metal grills. Clubmate I is ideal for small partys schools, practice rooms and exhibitions
The Club Mate 12 & 15 together with Soundmate III are upgraded into Clubmate I, II and III systems. Besides the improved sound quality the looks are also upgraded due to stylish metal grills. Together with the new scratch resistant finish and reduced weight (10-25%) makes these sets road-proof. The Clubmate sets are especially designed for the mobile DJ's, where a powerful bass is required as well as a smooth mid–high frequency response. The 12" and 15" subwoofers have a long linear cone excursion to ensure minimal distortion and high power levels as well as getting a higher maximum sound pressure. Special attention is given to the power ratings of the subwoofers and satellites as well as the behaviour of all the independent dynamic compressors and limiter circuits inside. The club mate sets are easy to set-up also for non-technical users.
Specifications Subwoofer:
Amplifier output low: 350W RMS at 8 Ohm
Amplifier output high: 2x 120W RMS at 8 Ohm
Freq. Response (-3 dB): 47- 125Hz
Crossover Frequency: 125 Hz, 24 dB/Oct BW
Efficiency (Half Space): 100 dB / W / m
Peak. SPL at 1 m (Theoretical): 125.4 dB
S/N Ratio: >100dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (WxHxD): 450 x 510 x 600 mm
Weight 26.0 kg
Satellites:
Drivers: 6,5" / 1“
Freq. Response (-3 dB): 125-20.000Hz
Crossover Frequency: 3300 Hz, 12 dB/Oct
Efficiency (Full Space): 95 dB / W / m
Peak. SPL at 1 m (Theoretical): 115.8 dB
Nominal Dispersion (HxV): 90° x 60°
Dimensions (WxHxD): 240 x 388 x 245 mm
Weight: 6,4 kg
800Wrms AMPLIFIED PA SYSTEM WITH TWO SUBWOOFERS AND TWO COLUMN SPEAKERS
Media player with SD / USB / Bluetooth inputs
Graphic equalizer
Two MIC / LINE inputs with tone control
Digital ECHO
Stereo LINE input
Monitor output
RMS power: 800W
Frequency response: 47-20000Hz
Max. SPL (continued): 128Db
N. 2 Subwoofer
Transducer: 12 "(320mm)
Dimensions (L * W * H): 355*550*440mm
N. 2 Satellites
Transducers: 4 x 4 "mids, 4 x 1" Neodymium tweeters
The new LD Systems DAVE 8XS is a portable 2.1 multimedia system with a high-performance 8" band pass subwoofer and two satellites (each 4" + 1“, with silk dome).
The system provides crystal-clear sound and was specifically designed for multimedia applications such as home PA or gaming; it is also suitable as a monitor for DJs or keyboardists or as a music system for smaller venues such as bars and cafés. The high-performance A/B amplifier built into the subwoofer provides for both the subwoofer and the satellites. The multimedia system LD DAVE 8XS has line inputs in XLR and RCA format and is equipped with all standard protections. The built-in limiter keeps the system safe from overload and ensures a long service life. On the side of the subwoofer, in addition to an ON/OFF switch and a phase reverse switch (180°), there is a separate subwoofer volume knob that allows you to find the perfect mix of brilliant treble, punchy mids, and powerful bass.
From serial number 130818000001, the satellite speakers are equipped with a 16 mm flange and are therefore compatible with the speaker stands from LDDAVE8SET2.
Product type
PA Complete Systems
Colour
white
Max. SPL (continuous)
117 dB
Frequency response
45 - 19000 Hz
Dispersion (H x V)
60 x 60 °
Weight
29 kg
Subwoofer
Low/mid driver dimensions
8 "
Woofer size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Cabinet construction
Bandpass
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Subwoofer width
352 mm
Subwoofer height
430 mm
Subwoofer depth
434 mm
Mid/Hi System
Midrange size
2 x 4 "
Midrange size
2 x 101.6 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
12 mm MDF
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
144 mm
Mid/Hi system height
350 mm
Mid/Hi system depth
170 mm
Mid/Hi system features
16 mm flange , 2 x M6 mounting points for wall mounting , Grilles for satellites included
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
350 W
Amplifier output system (peak)
1400 W
Protection circuits
limiter , overload , short circuit
Cooling
Aluminium heat sink
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Power
Operating voltage
transformer
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Loudspeaker outputs
2
Speaker output connections
Speakon compatible Left/Right
LD Systems STINGER G3 GALA SET A 2 x double 8" powered PA Speaker + 2 x 18" powered Subwoofer
Including a pair of slim, low-profile satellites and two subwoofers, this set is a great option for events that require excellent speech intelligibility and extended coverage. We recommend this set for the following type of application: gala events, corporate conferences. The STINGER G3 GALA SET A is suitable for audiences of up to 350* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 28 A G3 – 28” Powered loudspeaker
2 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 28 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
General
Product type
PA system
Type
Powered
System output (RMS):
2.600 W
Frequency response
35 - 20,000 Hz
Dispersion (H x V)
90 x 50°
Weight
144,1 kg
LDESUB18G3CB - LD Systems STINGER G3 GALA SET A Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA Complete Systems Accessories
Material
birch multiplex
Type
castor boards
Material thickness
15 mm
Surface
Polyurea
Color
Black
Number of casters
4
Wheel diameter
100 mm
Manufacturer of castors
Adam Hall
number of drag castors
2
Length
650 mm
Width
540 mm
Weight
7 kg
LDEB282AG3 - LD Systems STINGER G3 GALA SET A Active 2 x 8" 2-way bass-reflex PA Loudspeaker
Product type
PA loudspeaker
Type
Powered
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
RMS
500 W
Peak power
1000 W
Frequency response
58 - 20000 Hz
Max. SPL (peak)
131 dB
Protection circuits
thermal overload
Input sensitivity
-5 dBu
Controls
2 x Mic/Line
Line input connectors
XLR
Line outputs
1
Cabinet material
12 mm Plywood
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
20,5 kg
LDESUB18AG3 - LD Systems STINGER G3 GALA SET A Active 18" bass-reflex PA subwoofer
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
RMS
800 W
Peak power
1600 W
Indicators
Signal
Frequency response
35 - Low-Pass Hz
Line inputs
2
Line input connectors
XLR
Line output connectors
XLR
Max. SPL (peak)
135 dB
Operating voltage
SMPS
Protection circuits
short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet surface
Polyurea
Cabinet construction
Bass Reflex
Controls
Mode
Depth
740 mm
Line outputs
2
Cabinet material
18 mm Plywood
Width
677 mm
Height
547 mm
Weight
42,6 kg
LDESUB18G3PC - LD Systems STINGER G3 GALA SET A Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type
PA Subwoofer Accessories
Color
Black
Material
Nylon 1680D
Type
Covers
Thickness of the padding
8 mm
Depth
625 mm
Width
567 mm
Height
470 mm
Weight
1,5 kg
LDEB282G3PC - LD Systems STINGER G3 GALA SET A Padded protective Cover for Stinger® G3 PA Loudspeaker 2 x 8"
Compact Column A System with Mixer and Bluetooth black
All-in-one column speaker for PA and monitor applications
2,000 watts peak Class-D system power offer high performance with a low weight
Powerful bass reproduction with 2 x 8" woofers
Balanced mids thanks to the 16 x 3" full-range speakers
Precise and silky highs with 2 x 1" high-frequency drivers
Increased range and wider coverage through the array arrangement
Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
Two-piece column for compact transport
Secure plug-and-play connection thanks to the wireless multi-pin mechanism
A wide range of application options through dismountable columns
Easy operation with presets for mono or stereo configuration
Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 28 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 28 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed with year-long experience in the design of the column systems as a user-friendly solution for medium sized gigs and fixed installations.
The MAUI 28 G2 is equipped with two 8" woofers, sixteen 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier with an enormous 2,000 watts peak power and produce a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides a top-class performance every time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way crossover with run time correction.
The design of the MAUI 28 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer, DJ or musician in a small band, you will be thrilled with the extraordinary sound and portability of the MAUI 28 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 28 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
126 dB
Frequency response
45 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2059 mm
Weight
30,9 kg
Woofer characteristics
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
370 mm
Subwoofer height
484 mm
Subwoofer depth
480 mm
Subwoofer weight
19.7 kg
Mid/Hi System
Midrange size
16 x 3 "
Midrange size
16 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x 1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
780 / 795 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.6 / 5.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
1000 W
Amplifier output system (peak)
2000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
2 (1x System Out, 1x Sub Out)
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
LD Systems STINGER G3 GALA SET 2 x double 8" passive PA Speaker + 2 x 18" passive Subwoofer + Amping Rack
Including a pair of slim, low-profile satellites and two subwoofers, this set is a great option for events that require excellent speech intelligibility and extended coverage. We recommend this set for the following type of application: gala events, corporate conferences. The STINGER G3 GALA SET is suitable for audiences of up to 350* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 28 G3 – 28” Passive loudspeaker
2 x STINGER SUB 18 G3 – 18” Passive subwoofer
1 x DSP 45K RACK – Power amplifier with DSP
2 x STINGER 28 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
General
Product type
PA system
Type
Passiv
System output (RMS):
2.400 W
Frequency response
35 - 20,000 Hz
Dispersion (H x V)
90 x 50°
Weight
156 kg
LD Systems DSP 45 K RACK 4-Channel DSP Power Amplifier and Patchbay in 19" Rack Case
Product type
PA Complete Systems Accessories
Material
birch multiplex
Type
castor boards
Material thickness
15 mm
Surface
Polyurea
Color
Black
Number of casters
4
Wheel diameter
100 mm
Manufacturer of castors
Adam Hall
number of drag castors
2
Length
650 mm
Width
540 mm
Weight
7 kg
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type
PA loudspeaker
Type
Passive
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Load rating (RMS)
400 W
Peak power
800 W
Frequency response
58 - 20000 Hz
SPL (1W/1m)
99 dB
Max. SPL
125 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Speakers per amplifier channel (DSP44/45K)
3
Cabinet material
12 mm Plywood
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
19,3 kg
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA subwoofer
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Impedance
8 Ohm(s)
Loudspeaker inputs
1
Load rating (RMS)
800 W
Speaker input connections
Speakon compatible
Loudspeaker outputs
1
Speaker output connections
Speakon compatible
Peak power
1600 W
Frequency response
35 - Crossover Hz
Cabinet surface
Polyurea
Cabinet construction
Bass Reflex
SPL (1W/1m)
100 dB
Max. SPL
129 dB
Depth
740 mm
Speakers per amplifier channel (DSP44/45K)
2
Cabinet material
18 mm Plywood
Width
677 mm
Height
547 mm
Weight
40,6 kg
LD Systems STINGER 28 G3 Passive 2 x 8" 2-way bass-reflex PA Loudspeaker
Product type
PA Subwoofer Accessories
Color
Black
Material
Nylon 1680D
Type
Covers
Thickness of the padding
8 mm
Depth
625 mm
Width
567 mm
Height
470 mm
Weight
1,5 kg
LD Systems STINGER SUB 18 G3 18” Passive Bass Reflex PA Subwoofer
Product type
Power Amplifiers
Type
19" / 3 HE
Weight
17,9 kg
LD Systems STINGER 28 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 2 x 8"
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User´s manual
Reviews
There are no reviews yet.