| Content | Full Range Speaker
- Equipped with: 10" + 1“
- Dispersion: 90° x 60° CD horn
- Power: 300 W RMS
- Impedance: 8 Ohm
- Frequency range: 95 - 19,000 Hz
- Max. SPL: 126 dB
- Flange mount
- 3 x M8 fly points
- 2 Handles
- Connectors: 2 x speaker twist
- Dimensions: 320 x 480 x 290 mm
- Weight: 12.9 kg
| MASTER AUDIO SB250 Passive Loudspeaker 2 Way 10" 200Wrms 8 Ohm
- 2-way passive speaker box
- Impedance(Ohm) 8
- Power output 200 W RMS
- ABS box - Woofer 10“, paper cone
- Compression driver,1" titanium diaphragm
- Frequency reponse: 50 - 17KHz (-10dB)
- Sensitivity: 103 dB - Speakon input and output
- Dimension: 472 x 345 x 270 mm
|
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
| Features |
|---|
| Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | | Stainless steel bracket | | One 10" high-output LF transducer with 2" voice coil | | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | | 90° x 40° constant directivity horn | | Built in passive crossover and selectable line transformer | | 10° X 20° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | | LICC (Low Impedance Compensated Crossover) network | |
12 brass suspension points (M8)
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 118 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 11 | | | System Sensitivity: | 95 dB | | | Nominal Impedance: | 16 Ω | | | Power Handling: | 200 Watt | | | Peak Power Handling: | 800 Watt | | | Recommended Amplifier: | 400 | | | Protections: | Dinamyc | | | Crossover frequencies: | 2000 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.5" HF driver, 1" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 106 dB | | | Woofer: | 10" woofer, 2.5" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 180 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 5m, 4-adriges Neopren Kabel | | | Constant voltage transformer: | 70/100 | | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
| CABINET |
|---|
| Cabinet Material: | Polyethylene rotomoulded | | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Grey | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 350 / 13.78 mm/inch | | | Width: | 350 / 13.78 mm/inch | | | Depth: | 320 / 12.60 mm/inch | | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
Made for permanent sound placement.
The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES
10″ 2-way low-profile installation loudspeaker
10″ high-output ceramic woofer with 2″ voice coil for maximum output
1.4″ titanium compression driver provides smooth, consistent high-frequency response
8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
Rotatable center logo allows for clean presentation in all configurations
Convenient terminal strip connectivity saves time and cost
Dual Neutrik parallel connectors
Lightweight, compact and durable 15mm poplar cabinet construction
SPECIFICATIONS
iP-10 10" 2-Way Passive Loudspeaker
Frequency range (-10 dB): 50 Hz - 20 kHz
Coverage pattern: 90° x 50°
Power handling: 200 watts continuous / 400 watts program
Max SPL: 124 dB
Crossover frequency: 3 kHz
Nominal impedance: 8Ω
Height: 20.5 in / 520 mm
Width (Front): 12 in / 310 mm
Width (Rear): 6.8 in / 172 mm
Depth: 13.4 in / 340 mm
Product weight: 26 lb. / 11.8 kg |
Description - Superior, crystal clear, sound quality from a compact full range speaker cabinet.
- The VIBE10 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
- Remarkable low frequency reproduction for a small sized cabinet
- Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
- Perfect for portable use: DJ, hiring companies, …
- VIBE10 Mk2 and VIBE15-SUB Mk2 make a perfect couple for more demanding situations.
- Solid, high strength, MDF enclosure
- Scratch resistant polyurethane painting
- Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
- Strong M8 Rigging Points
- Built-in 35mm Speaker stand adapter
- High Power 10inch (25cm) Woofer
- High Power 1,5inch Titanium Driver
- 2 Neutrik Speakon® connectors
- Specially designed Glass fiber horn
- Built-in heavy duty carrying handles
- Heavy duty rubber feet
Technical Information - Power Capacity: 200Wrms (400Wpeak)
- Input impedance: 8Ω
- Input Sensitivity: 95dB 1W/1m
- Max. SPL: 120dB
- Frequency response: 65 - 20.000Hz
- Nominal dispersion: 100° x 70° (HxV)
- Dimensions: 330 x 510 x 302 mm
- Weight: 15kg
|
The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications. |
Reviews
There are no reviews yet.