Content | Full Range Speaker
- Equipped with: 10" + 1“
- Dispersion: 90° x 60° CD horn
- Power: 300 W RMS
- Impedance: 8 Ohm
- Frequency range: 95 - 19,000 Hz
- Max. SPL: 126 dB
- Flange mount
- 3 x M8 fly points
- 2 Handles
- Connectors: 2 x speaker twist
- Dimensions: 320 x 480 x 290 mm
- Weight: 12.9 kg
|
- Equipped with: 2" tweeter and 10" woofer
- Equipped with Yamaha\'s "Wide Dispersion CD Waveguide Horn“
- Rated power: 700 W (PGM)
- Biamp mode
- Setting for floor monitor
- Lightweight but durable wooden cabinet with high quality polyurea coating
- Stand flange mount for two angles
- Rotatable horn and various U-bracket options (UB-DZR10H/V) for flexible setup and placement
- Dimensions (W x H x D): 315 x 537 (with rubber feet) x 345 mm
- Weight: 14.0 kg
|
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
- Sealed type speaker with 60W continuous pink noise and 180W continuous program power handling capacity.
- Highly efficient operation at rated sound pressure level of 96dB (1W, 1m).
- Frequency response of 100Hz~20,000Hz and 2.5kHz passive network crossover frequency.
- Two-way coaxial unit with 25cm low- frequency cone speaker and high- frequency CD horn fitted with compression driver (60º horizontal × 60º vertical).
- 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications.
- Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille.
- Speaker mounting brackets and speaker mounting bolts included.
- Optional matching MT-S0601 transformer.
Spec. | Enclosure | Sealed type | Power Handling Capacity | Continuous Pink Noise: 60W/Continuous Program: 180W | Rated Impedance | 8 ohms | Sound Pressure Level | 96dB (1W, 1m) | Frequency Response | 100 - 20,000Hz | Crossover Frequency | 2.5kHz (passive network) | Speaker Component | 2-way coaxial unit/Low Frequency; 25cm cone speaker
High Frequency; CD horn fitted with compression driver (60º horizontal × 60º vertical) | Input Terminal | 2-pole M5 screw terminal, pitch between barriers; 12.2mm | Finish | Enclosure; Coniferous plywood, black, semi-mat, urethane paint
Grille; Steel plate, black, semi-mat, acryl paint | Dimensions (W × H × D) | 460 × 310 × 200mm | Weight | Speaker System; 9kg
Mounting Bracket; 2kg | Accessories | Speaker mounting bracket × 2
Speaker mounting bolt × 4 | |
Made for permanent sound placement.
The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES
10″ 2-way low-profile installation loudspeaker
10″ high-output ceramic woofer with 2″ voice coil for maximum output
1.4″ titanium compression driver provides smooth, consistent high-frequency response
8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
Rotatable center logo allows for clean presentation in all configurations
Convenient terminal strip connectivity saves time and cost
Dual Neutrik parallel connectors
Lightweight, compact and durable 15mm poplar cabinet construction
SPECIFICATIONS
iP-10 10" 2-Way Passive Loudspeaker
Frequency range (-10 dB): 50 Hz - 20 kHz
Coverage pattern: 90° x 50°
Power handling: 200 watts continuous / 400 watts program
Max SPL: 124 dB
Crossover frequency: 3 kHz
Nominal impedance: 8Ω
Height: 20.5 in / 520 mm
Width (Front): 12 in / 310 mm
Width (Rear): 6.8 in / 172 mm
Depth: 13.4 in / 340 mm
Product weight: 26 lb. / 11.8 kg |
2-Way, 10“
High Power System |
Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
Specifications and Characteristics |
Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
Nominal Impedance |
8 Ohm |
Power Rating |
|
(RMS)2 |
300W |
Program2 |
600W |
Peak2 |
1200W |
Horizontal Coverage |
(-6dB) 90? |
Vertical Coverage |
(-6dB) 40? |
Sensitivity (dB/1w@1m) |
97dB SPL |
SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
Connectors |
2 Neutrik NL-4 Connectors on steel plate |
Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
Recommended Sub-woofer |
Space PMS-15 |
Enclosure and Installation |
Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
Handle |
On top of the cabinet. |
Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
Net Weight |
18Kg (39.6 pounds) |
Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
Notes |
|
1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
Reviews
There are no reviews yet.