Content |
Frequency Response: 20 - 20,000 Hz
Channel Separation: 20 dB at 1kHz
Channel Balance: 2.0dB
Tracking Force: 1.4-2.5g
Vertical Tracking Angle: 24°
Recommended Load Impedance: 47,000 ohms
Output Voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec)
Stylus Shape: Conical
Stylus Construction: Bonded Round Shank
Mount: Half-inch
Weight: 5.8g
Replacement Stylus: ATN91
|
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g | The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
Technical data |
|
Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
Channel balance at 1 kHz |
|
Channel separation at 1 kHz |
> 24 dB |
Channel separation at 15 kHz |
>15 dB |
Frequency range at - 3dB |
20-30.000 Hz |
Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
Compliance, dynamic, lateral |
13 µm/mN |
Stylus type |
Nude Fine Line |
Stylus tip radius |
r/R 8/40 µm |
Tracking force range |
1,8-2,2 g (18-22 mN) |
Tracking force, recommended |
2 g (20 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
100 Ohm |
Recommended load impedance |
47 kOhm / |
Cartridge body material |
Noryl |
Cartridge colour |
Black |
Cartridge weight |
4,1 g |
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-20.000 Hz
|
Frequency response
|
20-18.000 Hz -3dB/-2 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
--
|
Tracking force range
|
2,0-4,0 g (20-40 mN)
|
Tracking force recommended
|
3,0 g (30 mN)
|
Tracking angle
|
-
|
Internal impedance, DC resistance
|
-
|
Internal inductance
|
-
|
Recommended load resistance
|
-
|
Recommended load capacitance
| - |
Cartridge weight
| 18,5 g
|
Replacement stylus unit
| Digitrak |
|
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
|
Reviews
There are no reviews yet.