Audio Technica PRO31QTR Cardioid dynamic microphone

Discontinued

Original price was: €68.20.Current price is: €59.00. incl. GR VAT

Out of stock

CompareAdd to wishlist
This affordable cardioid dynamic microphone is designed for close-up vocal performance. The PRO31QTR offers a broad frequency response and low handling noise in a tough, durable design that delivers consistent performance on the road. The mic sets price/performance standards for intelligibility, transparent sound quality and noise suppression. Available in two models for easy use with […]

 

Read more

This affordable cardioid dynamic microphone is designed for close-up vocal performance. The PRO31QTR offers a broad frequency response and low handling noise in a tough, durable design that delivers consistent performance on the road. The mic sets price/performance standards for intelligibility, transparent sound quality and noise suppression. Available in two models for easy use with consumer and pro electronics: PRO31 (XLRF-XLRM cable) and PRO31QTR (XLRF- ¼” cable).

  • Close-up vocal performance microphone sets price/performance standards for intelligibility, transparent sound quality and noise suppression
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Hi-ENERGY® neodymium magnet for high output and articulate vocal reproduction
  • Two-stage ball-type headcase for superior “pop” protection
  • MagnaLock™ on/off switch
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged design and construction for reliable performance
  • Element: Dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 60-13,000 Hz
  • Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
  • Impedance: 600 ohms
  • Switch: MagnaLock™ on/off
  • Weight: 11.0 oz (312 g)
  • Dimensions: 7.28″ (185.0 mm) long, 2.09″ (53.1 mm) head diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Cable: 15.0′ (4.5 m) cable with XLRF-type connector at microphone end, 1/4″ connector at equipment end
  • Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica PRO31QTR Cardioid dynamic microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica PRO31QTR Cardioid dynamic microphone removeSENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE removeSENNHEISER MD-431 II Dynamic Broadcasting Microphone with ON/OFF Switch removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeBEHRINGER XM8500 Ultravoice XM-8500 Dynamic Cardioid Microphone removeElectro voice CO9 Dynamic Cardioid Microphone remove
NameAudio Technica PRO31QTR Cardioid dynamic microphone removeSENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE removeSENNHEISER MD-431 II Dynamic Broadcasting Microphone with ON/OFF Switch removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) removeBEHRINGER XM8500 Ultravoice XM-8500 Dynamic Cardioid Microphone removeElectro voice CO9 Dynamic Cardioid Microphone remove
ImageE945 SUPER CARDIOID microphone dynamicbeyerdynamaic m 88 tg dynamic hyperdioid microphone
SKUPRO31QTRH10SE00089H10SE00060M-88 TGE005393E002764
Rating
Price Original price was: €68.20.Current price is: €59.00. incl. GR VAT Original price was: €215.00.Current price is: €189.00. incl. GR VAT Original price was: €567.00.Current price is: €499.00. incl. GR VAT Original price was: €460.00.Current price is: €439.00. incl. GR VAT Original price was: €38.47.Current price is: €28.50. incl. GR VAT Original price was: €701,900.00.Current price is: €80.00. incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Legendary, universal all purpose microphone classic
  • Perfectly suitable for stage and studio
  • Unbelievably rich sound
  • Made in germany
Content

This affordable cardioid dynamic microphone is designed for close-up vocal performance. The PRO31QTR offers a broad frequency response and low handling noise in a tough, durable design that delivers consistent performance on the road. The mic sets price/performance standards for intelligibility, transparent sound quality and noise suppression. Available in two models for easy use with consumer and pro electronics: PRO31 (XLRF-XLRM cable) and PRO31QTR (XLRF- ¼" cable).

  • Close-up vocal performance microphone sets price/performance standards for intelligibility, transparent sound quality and noise suppression
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Hi-ENERGY® neodymium magnet for high output and articulate vocal reproduction
  • Two-stage ball-type headcase for superior "pop" protection
  • MagnaLock™ on/off switch
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged design and construction for reliable performance
  • Element: Dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 60-13,000 Hz
  • Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
  • Impedance: 600 ohms
  • Switch: MagnaLock™ on/off
  • Weight: 11.0 oz (312 g)
  • Dimensions: 7.28" (185.0 mm) long, 2.09" (53.1 mm) head diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Cable: 15.0' (4.5 m) cable with XLRF-type connector at microphone end, 1/4" connector at equipment end
  • Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
Super-Cardioid Model: The supercardioid pickup model is highly directional and mainly picks up sound from the front of the microphone. This helps reduce ambient noise and interference from the sides and back. Feedback Resistance: The Sennheiser E945 is known for its high resistance to feedback, making it ideal for use in live environments where there are high volumes and potential interference from other audio equipment. Sound Quality: With its ability to render natural vocal sounds with particular emphasis and fullness, the E945 is capable of positioning vocals prominently even when competing with loud instruments. Its ability to enrich vocals with warm tones provides a lively and full-bodied sound. Robustness and Reliability: The Sennheiser E945 is built to be durable and reliable. It is designed to handle the rigorous demands of live performance and touring. Ideal for Vocals: With its ability to emphasize vocals, the E945 is the perfect choice for situations where the voice needs to be the center of attention, such as concerts, presentations, and studio vocal recordings. Sennheiser E945 is an excellent quality microphone that delivers solid performance, particularly for vocals. Its resistance to feedback and ability to capture sounds with clarity and warmth make it a popular choice among music and audio professionals. Features Rugged metal body Advanced shock-mount design Consistent on-/off-axis response Hum compensating coil Made in Germany Delivery includes a pouch and a microphone clamp Delivery Includes 1 e 945 MZQ 800 microphone clamp Pouch Technical Data Pick-up pattern  Super-cardioid Frequency response (microphone)  40.....18000Hz Sensitivity in free field, no load (1kHz) 2,0mV/Pa bei 1 kHz = -54dB (0 dB = 1V/Pa) = -74 dB (0 dB = 1V/ubar) Nominal impedance  350 Ohm Min. terminating impedance  1000 Ohm Dimensions  47 x 186 mm Weight  330 gBy virtue of its design and features, the MD 431 II ranks amongst Sennheiserʼs most exceptional microphones and is suitable for vocal, speech and broadcasting applications. Colour: black, sound inlet basket: refined steel. Pick-up pattern : super-cardioid Sensitivity in free field, no load : (1kHz) 2,0 mV/Pa +- 3 dB Nominal impedance : 250 Ohm Min. terminating impedance : 1000 Ohm Dimensions : d 49 x 200 mm, Griff d 31 mm Weight :ca. 250 g

Technical Data

Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin

Made in Germany

Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.

 
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!  
Flexible tool iN The studio

The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.

Behringer Ultravoice XM8500 Dynamic Cardioid Microphone With the BEHRINGER vocal microphone ULTRAVOICE XM8500, your voice will shine in a way it never has before, giving a powerful edge to your performances. Your creative energy and highly professional demands finally have a worthy partner. You want your voice to come across at its best, capturing your audience with its power and expression. No problem: with the ULTRAVOICE XM8500, you've got them in your hands. Bringing out the subtlest nuances and placing them properly in the mix: that's what a good vocal microphone is all about. And that's exactly what the ULTRAVOICE does. Its cardioid characteristic picks up sound from the front with the utmost sensitivity, while strongly dampening sound from the back. This gives you more security against feedback. The integrated shock-mount system effectively reduces handling noise to an absolute minimum. The XM8500's balanced low-impedance output lets you connect it to any console or microphone preamp - provided it has enough dynamic headroom. You'll need plenty of that: the ULTRAVOICE is so powerful that you'll put your current favorite microphone in its box. Even if it cost ten times as much. On stage, dependability counts. The ULTRAVOICE won't let you down. Its rugged construction protects it against the toughest changes you can put it through. The matte anodized surface reduces reflections from studio or stage lighting. The two-stage pop filter and tough steel mesh keep breath and pop noises out of the signal. Dynamic vocal microphone with smooth mid-frequency presence rise for excellent vocal projection Internal shock mount system to cut down handling noise Cardioid characteristic minimizes background noise and feedback Ultra-low distortion for a super clean sound Microphone stand adapter included Ultra-professional dynamic vocal microphone 50 Hz - 15 kHz frequency response for crystal-clear, highly detailed vocals Super rugged, reliable metal construction and electromagnetic shielding High-level balanced output Two-stage pop filter minimizes breath and pop noises Sensitivity - 70 dB
Transducer Dynamic
Polar Pattern Cardioid
Frequency Response 50 Hz to 15 kHz
Maximum Input Sound Level not specified by manufacturer
Power Requirements None Dynamic, Requires No Phantom or Battery Power
Output Impedance 150 Ohms
Output Connectors Gold-Plated Pin XLR-3M Type
Dimensions 6.375 x 2" (162 x 51mm) LxDiameter
Weight 8.47 oz. (240 g)

Electro-Voice Cobalt CO9

The Co9 is a favorite among vocalists across all musical genres.

Technical Specifications

Element: Dynamic Neodymium magnet structure

Frequency Response 50 Hz to 18 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (600 Ohms) Sensitivity Open Circuit Voltage 3.2 mV/PA (-50 dBV) re 1 Pa* 1 Pa = 94 dB SPL
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
Finish Durable polyurethane paint
Materials Die cast zinc housing
Dimensions Length 6.7 in. (170 mm) Diameter 2.1 in. (53 mm) Shank .85 in. (22 mm)
Weight Net 11.8 oz. (306 grams) Shipping 29.9 oz. (819 grams)
Accessories included Stand adaptor (black) Gig bag

Weight0.20 kg0.5 kg0.25 kg0.600 kg0.24 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.5 kg
Weight 0.25 kg
Weight 0.600 kg
Weight 0.24 kg
Weight 1.00 kg