Audio Technica ATW-T310b UniPak® transmitter

298.25 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA […]

 

Read more

The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing “Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.

The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.

 

  • RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
  • Spurious Emissions: Following federal and national regulations
  • Input Connection: Four-pin Locking Connector
    Pin 1: GND, Pin 2: INST INPUT,
    Pin 3: MIC INPUT, Pin 4: DC BIAS +5V
  • Batteries: Two 1.5V AA, not included
  • Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
    Depending on battery type and use pattern.
  • Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
  • Net Weight: 81 g without batteries

 

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica ATW-T310b UniPak® transmitter”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica ATW-T310b UniPak® transmitter removeAKG SR 40 SINGLE Receiver non diversity removeTOA IR-702T Infrared Wireless Tuner removeSENNHEISER Receiver EK-2000-BW-X removeAudio Technica ATW-1501 System 10 Digital 2.4 GHz Stompbox wireless system removeAKG SR 40 DIV RECEIVER DIVERSITY 1 UHF remove
NameAudio Technica ATW-T310b UniPak® transmitter removeAKG SR 40 SINGLE Receiver non diversity removeTOA IR-702T Infrared Wireless Tuner removeSENNHEISER Receiver EK-2000-BW-X removeAudio Technica ATW-1501 System 10 Digital 2.4 GHz Stompbox wireless system removeAKG SR 40 DIV RECEIVER DIVERSITY 1 UHF remove
Image
SKUATW-T310bSR 40 SINGLEIR-702TH99SE00248ATW-1501SR 40 DIV
Rating
Price 298.25 incl. GR VAT 80.00 incl. GR VAT 335.00 incl. GR VAT 969.00 incl. GR VAT 379.85 incl. GR VAT 154.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.

The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.

 

  • RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
  • Spurious Emissions: Following federal and national regulations
  • Input Connection: Four-pin Locking Connector
    Pin 1: GND, Pin 2: INST INPUT,
    Pin 3: MIC INPUT, Pin 4: DC BIAS +5V
  • Batteries: Two 1.5V AA, not included
  • Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
    Depending on battery type and use pattern.
  • Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
  • Net Weight: 81 g without batteries

 

  • Single fixed frequency
  • All-metal case
  • Multichannel capability for simultaneous use of up to seven channels (maximum number of channel depends on local frequency plans).
  • High Definition Audio Performance technology ensures the legendary, realistic AKG sound and perfect audio transmission.

The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.

Specification
(*1) 0 dB = 1 V
Power Source AC mains, 50/60 Hz (supplied from the included AC adapter)
Power Consumption 15 W or less
Receiving Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Receiver Sensitivity S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation)
S/N Ratio 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted)
Tone Squelch Frequency 32.768 kHz
Infrared Receiver Input 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals)
Output Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output.
Frequency Response 100 Hz - 12 kHz
Operating Temperature -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Case: ABS resin, black
Dimensions 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“)
Weight 630 g (1.39 lb) (unit only)
Accessory AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4
Option Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together)

 

It is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.

Audio-Technicaʼs System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • 2.4 GHz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time, & space
  • Two switched TRS balanced 1/4" output jacks
  • Output mode selector and foot switch to toggle between outputs or mute/unmute Output A without muting Output B (e.g., for use with tuner)
  • Multi-pairing function to link a single receiver with up to eight body-pack transmitters
  • Transmitter battery level display on receiver
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • State-of-the-art digital receiver housed in a strong, metal, stompbox-style body for reliable performance and pedal board mounting
  • Included hook & loop strips for adding receiver to effects pedal board
  • Universal (center + or -) 9v–12v DC input

 

OVERALL SYSTEM SPECIFICATIONS
  • Operating Frequencies: 2.4 GHz ISM band
  • Dynamic Range: >109 dB (A-weighted), typical
  • Total Harmonic Distortion: 7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions: 70.2 mm (2.76“) W x 107.0 mm (4.21“) H x 24.9 mm (0.98“) D
  • Net Weight: 100 grams (3.5 oz) without batteries
  • Accessory Included: AT-GcW Guitar Input Cable
  •  

    Δέκτης diversity 1 συχνότητας UHF (710-865mHz). Διαμόρφωση FM, εύρος 40-20kHz. Έξοδος MIC ή LINE level με XLR ή unbalanced jack 1/4. Κατάλληλος για όλους τους πομπούς της σειράς 40.

    Weight0.10 kg3.00 kg0.63 kg0.50 kg0.10 kg1.00 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.10 kg
    Weight 3.00 kg
    Weight 0.63 kg
    Weight 0.50 kg
    Weight 0.10 kg
    Weight 1.00 kg