| Content | Audio Technica VM760 SLC Dual MM Stereo Cartridge with Special Line Contact stylus
Using an ultra-lightweight stylus tip ground to a high level of precision, we have achieved a combination of low distortion rate with fuller frequency reproduction during playback. This stylus tip extracts every possible piece of information from the grooves on a record.
- Aluminium tapered cantilever
- Para-toroidal coils improve generating efficiency
- Centre shield plate between the left and right channels reduces crosstalk
- Die-cast aluminium alloy housing reduces vibration and adds a natural electrical shield
Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.
Para-toroidal generating system
Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
Centre shield plate reduces crosstalk
A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
- Mounting 1/2” centres
- Frequency Response 20 - 30,000Hz
- Channel Separation 30dB (1kHz)
- Output Channel Balance 1.0dB (1kHz)
- Output Voltage 4.0mV (1kHz, 5cm/sec.)
- Vertical Tracking Angle 23˚
- Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
- Stylus Shape Special Line Contact
- Stylus Size 0.28 x 1.5 mil
- Stylus Construction Nude Rectangular Shank
- Cantilever Aluminium Tapered Pipe
- Coil Impedance 2,700Ω (1kHz)
- Static Compliance 40 x 10-6 cm/dyne
- Dynamic Compliance 10 x 10-6 cm/dyne (100Hz)
- Recommended Load Impedance 47,000Ω
- Recommended Load Capacitance 100 – 200pF
- Weight 8.0g
- Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
- Replacement Stylus VMN60SLC
- Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1
|
Type: Dual Moving Coil
Frequency Response: 15 to 50,000 Hz
Channel Separation: 30 dB (1 kHz)
Channel Balance: 1.0 dB (1 kHz)
Coil Impedance: 12 W (1 kHz)
DC Resistance: 12 W
Vertical Tracking Angle: 23 degrees
Recommended Load Impedance: Min 100 W
Coil Inductance: 25 mH (1 kHz)
Static Compliance: 35 x 10 – 6 cm / dyne
Dynamic Compliance: 9 x 10 – 6 cm / dyne (100 Hz)
Output Voltage: 0.4 mV (at 1 kHz, 5 cm/sec)
Stylus Shape: MicroLine™
Cantilever: Gold-plated solid boron
Stylus Construction: Nude square shank
Mount: 1/2” centers
Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Weight: 8.0 g
Accessories: 1 non magnetic screw driver; 1 brush; 2 washers; 2 x 13.5 mm mounting screws; 2 x 18 mm mounting screws; 1 plastic protector;
|
Ortofon D 25 M Mono Cartridge Spherical Diamond
OM D 25 M Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
Channel balance at 1 kHz
Channel separation at 1 kHz
Channel separation at 15 kHz
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz +3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542:
Tracking ability at 315Hz at recommended tracking force: > 70 µm
Compliance, dynamic, lateral: 7 µm / mN
Stylus type: Spherical
Stylus tip radius: R 25 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 2,0-3,0 g (20-30 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 5 g
Replacement stylus unit: Stylus D 25 M
|
| The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
| TECHNICAL DATA |
|
| Output voltage at 1000 Hz, 5cm/sec. |
4 mV |
| Channel balance at 1 kHz |
2 dB |
| Channel separation at 1 kHz |
22 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at - 3dB |
20-25.000 Hz |
| Frequency response |
20-20.000 Hz ± 2 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
65 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,5-2,0 g (15-20 mN) |
| Tracking force, recommended |
1,75 g (17,5 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
750 Ohm |
| Internal inductance |
450 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
200-600 pF |
| Cartridge colour, body/stylus |
Black/Black |
| Cartridge weight |
5 g |
| Replacement stylus unit |
Stylus 5 E |
| The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.
The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
| TECHNICAL DATA |
|
| Output voltage at 1000 Hz, 5cm/sec. |
5,5 mV |
| Channel balance at 1 kHz |
1,5 dB |
| Channel separation at 1 kHz |
22 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at - 3dB |
20-22.000 Hz |
| Frequency response |
20-20.000 Hz + 3 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force |
70 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,6-2,0g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
1,3 kOhm |
| Internal inductance |
700 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
150-300 pF |
| Cartridge colour, body/stylus |
Black/Red |
| Cartridge weight |
7,2 g |
| Replacement stylus unit |
2M Red |
| For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
| Output voltage at 1000Hz, 5cm/sec. |
7 mV |
| Channel balance at 1kHz |
1,5 dB |
| Channel separation at 1kHz |
25 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at -3dB |
20-20.000 Hz |
| Frequency response |
20-15.000 Hz 3dB/-2dB |
| Tracking ability at 315 Hz at recommmende tracking force |
80 μm |
| Compliance, dynamic lateral |
6 μm/m N |
| Stylus type |
Spherical |
| Stylus tip radius |
R 18 μm |
| Tracking force range |
3,0-5,0 g (30-50 mN) |
| Tracking force recommended |
4,0 g (40 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
750 Ohm |
| Internal inductance |
450 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
200-600 pF |
| Cartridge weight |
5 g |
| Replacement stylus unit |
scratch |
|
Reviews
There are no reviews yet.