| Content | Audio Technica VM760 SLC Dual MM Stereo Cartridge with Special Line Contact stylus
Using an ultra-lightweight stylus tip ground to a high level of precision, we have achieved a combination of low distortion rate with fuller frequency reproduction during playback. This stylus tip extracts every possible piece of information from the grooves on a record.
- Aluminium tapered cantilever
- Para-toroidal coils improve generating efficiency
- Centre shield plate between the left and right channels reduces crosstalk
- Die-cast aluminium alloy housing reduces vibration and adds a natural electrical shield
Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.
Para-toroidal generating system
Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
Centre shield plate reduces crosstalk
A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
- Mounting 1/2” centres
- Frequency Response 20 - 30,000Hz
- Channel Separation 30dB (1kHz)
- Output Channel Balance 1.0dB (1kHz)
- Output Voltage 4.0mV (1kHz, 5cm/sec.)
- Vertical Tracking Angle 23˚
- Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
- Stylus Shape Special Line Contact
- Stylus Size 0.28 x 1.5 mil
- Stylus Construction Nude Rectangular Shank
- Cantilever Aluminium Tapered Pipe
- Coil Impedance 2,700Ω (1kHz)
- Static Compliance 40 x 10-6 cm/dyne
- Dynamic Compliance 10 x 10-6 cm/dyne (100Hz)
- Recommended Load Impedance 47,000Ω
- Recommended Load Capacitance 100 – 200pF
- Weight 8.0g
- Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
- Replacement Stylus VMN60SLC
- Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1
|
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g |
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
|
2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
| TECHNICAL DATA |
| | Output voltage at 1000 Hz, 5cm/sec. | 5 mV | | Channel balance at 1 kHz | 1 dB | | Channel separation at 1 kHz | 26 dB | | Channel separation at 15 kHz | 15 dB | | Frequency range at - 3dB | 20-29.000 Hz | | Frequency response | 20-20.000 + 2 / - 0 dB | | Tracking ability at 315Hz at recommended tracking force | 80 µm | | Compliance, dynamic, lateral | 22 µm/mN | | Stylus type | Nude Fine Line | | Stylus tip radius | r/R 8/40 µm | | Tracking force range | 1,4-1,7g (14-17 mN) | | Tracking force, recommended | 1,5 g (15 mN) | | Tracking angle | 20° | | Internal impedance, DC resistance | 1,2 kOhm | | Internal inductance | 630 mH | | Recommended load resistance | 47 kOhm | | Recommended load capacitance | 150-300 pF | | Cartridge colour, body/stylus | Black/Bronze | | Cartridge weight | 7,2 g | | Replacement stylus unit | 2M Bronze | | THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output | A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
| Output voltage at 1000Hz, 5cm/sec. |
10 mV |
| Channel balance at 1kHz |
1,5 dB |
| Channel separation at 1kHz |
20 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at -3dB |
20-18.000 Hz |
| Frequency response |
20-18.000 Hz +3/- 2dB |
| FIM distortion at recomm. tracking force DIN 45.542 |
|
| Tracking ability at 315 Hz at recomm. tracking force |
120 μm |
| Compliance, dynamic lateral |
11 μm/m N |
| Stylus type |
Spherical |
| Stylus tip radius |
R 18 μm |
| Tracking force range |
1,5-10,0 g (15-100 mN) |
| Tracking force recommended |
4,0 g (40 mN) |
| Internal impedance, DC resistance |
1680 Ohm |
| Internal inductance |
920 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
200-600 pF |
| Cartridge weight |
18,5 g |
| Replacement stylus unit |
Ortofon-Serato S-120 |
|
Reviews
There are no reviews yet.