| Content | The xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go.
The mother of all amplifiers
The xCAN is a portable amplifier above all else and is for anyone who enjoys good sound.
Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice?
Just add the xCAN to drive bigger and better headphones and boost your tunes.
Blinding Bluetooth
The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic.
Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side.
Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory.
Wicked wiring
Connect via a digital SPDIF or via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.
On headphones this means lower distortion, less interference and less crosstalk.
And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs.
A pure power house
The xCAN is a dual-mono headphone amplifier with 1000mW of power per channel. It will happily drive your favourite headphones.
And we added our signature sonic extras as well.
3D+® opens up your music to give you the spaciousness of a live-concert atmosphere.
The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies.
Clever. Curvy.
The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey!
And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady.
Specifications
| Inputs |
Wireless |
ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC) |
| Wired |
3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS)
*ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources.
No USB audio input |
| Max Output |
S-Balanced |
> 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm |
|
Balanced |
> 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm) |
| THD & N |
S-Balanced |
< 0.005% (@ 100 mW/1.26V 16 Ohm) |
| Balanced |
< 0.006% (@ 360 mW/2.4V 16 Ohm) |
| SNR |
S-Balanced |
> 121dBA (@ 3.8V) |
| Balanced |
>120dBA (@ 7.6V) |
| Recommended HP Impedance |
16~600 Ohm |
| Output impedance |
S-Balanced |
|
|
Overview
Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.
Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability |
MyMONITOR - Personal Headphone Monitor Mixer Overview
Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.
MyMONITOR - Personal Headphone Monitor Mixer Specifications:
Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)
| The VOX AMPLUG AC30 Guitar Headphone Amplifier, AC30 voicing. Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast.
The VOX amPlug AC30 is your fastest ticket to great tone – anytime, anywhere! Jamming late at night? Donʼt want to wake the neighbours? Maybe you want to work out a lick with your MP3 player without taking the time to set up your amp. You want to play guitar right now. amPlug is the answer. Simply plug this palm-sized headphone guitar amp directly into your guitar, and enjoy serious guitar sound anywhere, anytime. VOX amPlug AC30 is based on a vintage VOX AC30. Even with its ultra-compact size, amPlug AC-30 perfectly reproduces the complex and warm distortion that is distinctive of a vacuum tube. Using all new analog modeling technology, amPlug delivers full-fledged amp sound. With its completely analog design, great care was also taken with amPlug's gain circuitry. The "AC30" uses two natural-sounding gain stages to reproduce the distinctive AC30 tone. Even the circuit response of the original amp is simulated completely. The simulation extends not only to the response of the tone circuits, but also to the way in which the high frequency and gain are affected when you turn down the volume control of the guitar. Every detail has been faithfully reproduced. With up to fifteen hours of battery life, it's easy to take amPlug anywhere. In addition to practicing at home, it's a great way to warm up before a live performance or on the road. And amPlug is not just a convenient way to get great guitar sound. There's also an AUX input jack so you can jam along with your CD/MP3 player.
The main features of the VOX AMPLUG AC30 include:
- Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast
- AUX in jack lets you jam along with your CD/MP3 player
- 100% analog circuit faithfully simulates the response of the original amps
- AC30 emulates the AC30 top boost sound of a vintage VOX AC30
- Up to 15 hours of battery life with two Alkaline AAA batteries
- Quick and easy setup! Just connect amPlug to your guitar and enjoy serious sound
- Dimensions (W x D x H): 86 x 80 x 31 (mm), 3.39 x 3.15 x 1.22 inches
- Weight: 40g /1.41oz. (not including batteries)
- Included items: two AAA zinc-carbon batteries
| The new HP4 from PreSonus answers the need for a headphone distribution
amplifier with professional specifications in a small package at an affordable
price. The HP4 features four discrete headphone outputs on the front panel
each with its own volume potentiometer and 150mW of amplification per channel.
The HP4 also features adjustment over control room monitors with a separate
volume control, monitor mute switch and mono switch giving you an extremely
powerful monitoring solution at an amazingly low price.
Features
? Four High Power Headphone Outputs
? Ultra loud (150mW per channel)
? Ultra quiet operation
? Musical Wide Dynamic Range
? Control Room Monitor Outputs with Level Control
? Mono or Stereo Operation
? Monitor Mute Switch
? Daisy Chain an Infinite Number of Units
? Compact package
Technical Specifications
Input
TRS Impedance 10K Ohms
Panel Controls
Headphone Level 1 to 12
Monitor / Feed Output -80dB to +10dB
Mono Switch
Monitor / Feed Mute
Power Supply
Type Linear
Input 16VAC/1000mA
Output
TRS Balanced 51 Ohms Impedance
Performance
THD+Noise (Unweighted) 0.002%
Noise Floor -98dB
Signal To Noise >95dB
Power Supply Rejection >98dB
Power 16 Watts
Physical
Weight 5lbs./ 2.3 kg.
Dimensions 5.5 x 5.5 x 1.75
Mounting Max Rack and Universal Rack Tray
Chassis Steel
Panel Brushed Aluminum
Sides Cast Aluminum |
Specifications
General
Frequency response
20 Hz - 20 kHz (+0 dB, -1.5 dB)
Signal-to-noise ratio
100 dB (IHF A-weighted, input level control min.)
Channel separation
80 dB between adjacent channels
Line input
Front: 6.3 mm jacks, unbalanced
Rear: RCA connectors, unbalanced
Input impedance
40 kOhm
Nominal level
-10 dBV (0.3 V)
Headphone outputs
four 6.3 mm stereo jacks
Maximum output power
2 x 1.5 W at 8 Ohm (1 channel in use)
2 x 1,2 W an 8 Ohm (four channels in use)
Power supply
230 V AC, 50 Hz
Power consumption
10 W
Dimensions (W x H x D)
482 mm x 44 mm x 196 mm
Weight
4 kg |
Reviews
There are no reviews yet.