| Content |
The ADX10FL P is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the area or section being miked from other instruments or vocals on stage. With a smooth and accurate frequency range of 50 Hz - 18 kHz, the ADX10FL P is lightweight, low profile and will provide natural sound with exceptional transient response.
The ADX10FL P, specifically for use with a flute, includes a clip that attaches to the headstock of a flute, an 8ʼ cable terminating to a mini XLR-f connector and a phantom power adapter (APS 911). Other model versions are available as well, one of which is the ADX10 FL; for use with the Audix RAD360 wireless system which includes a flute clip, 3ʼ attached cable terminating to a mini-XLRf connector.
Manufactured to high standards and tight tolerances, the ADX10FL P features a modular threaded capsule, machined brass body with matte black finish, high quality shielded microphone cable and a variety of optional accessories.
| Type | Pre-polarized Condenser |
|---|
| Polar Pattern | Cardioid | | Frequency Response | 50Hz - 18kHz | | Impedance | 250 Ohms | | Sensitivity | 4.5 mV/Pa @1k |
| The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments.
Features
Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount
Delivery Includes
1 e 604
1 drum clip
1 pouch
Technical Data
Frequency Response 40.....18000 Hz
Sensitivity in free field, no load (1kHz) 1,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 33 x 59 mm
Weight w/o cable 60 g |
The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...18000 Hz
Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 128,5 x 60 mm
Weight 440 g
| The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Frequency response: 40 to 15,000 Hz
| Frequency Range |
40 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Load Impedance |
310 Ohms |
| Sensitivity |
56 dBV/Pa (Open Circuit Voltage, 1 kHz) |
| Color |
Gray |
| Mounting |
5/8"-27 Female, Mic Clip (Included) |
| Construction Material |
Steel, Steel Wire Grille |
| Dimensions |
ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm |
| Weight |
10.02 oz / 284 g |
|
Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin
Made in Germany
Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!
Flexible tool iN The studio
The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.
|
Audio Frequency Response 50 Hz - 16,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 600 Ω
Mic Type Instrumental
Open Circuit Voltage 2.2 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Wired/Wireless Wired
Weight Net 8.32 oz (236 g)
|
Reviews
There are no reviews yet.