AUDIX D6 Kick drum microphone – professional dynamic

229.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Provides huge kick drum sound. Ground shaking low end combined with exceptional clarity and attack. The D6 is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the D6 is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. Lightweight, compact and easy to position, […]

 

Read more

Provides huge kick drum sound. Ground shaking low end combined with exceptional clarity and attack.

The D6 is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the D6 is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

Lightweight, compact and easy to position, the D6 is an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drums, large toms and bass cabinets.  The D6s transformer less design, low impedance and balanced output allow for interference-free performance.

Designed, assembled, and tested by Audix in the USA.

Type Dynamic
Polar Pattern Cardioid
Frequency Response 30Hz – 15kHz
Impedance 280 ohms
Sensitivity .8 mV/Pa @ 80Hz

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIX D6 Kick drum microphone – professional dynamic”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIX D6 Kick drum microphone - professional dynamic removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeSENNHEISER E-609 Dynamic Microphone for Strings removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE remove
NameAUDIX D6 Kick drum microphone - professional dynamic removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeSENNHEISER E-609 Dynamic Microphone for Strings removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE remove
Image
SKUD6BETA 52AH10SE00147LDWS1000MWD1301H10SE00051
Rating
Price 229.00 incl. GR VAT 231.36 incl. GR VAT 98.00 incl. GR VAT 108.04 incl. GR VAT 43.39 incl. GR VAT 115.00 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Provides huge kick drum sound. Ground shaking low end combined with exceptional clarity and attack.

The D6 is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the D6 is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

Lightweight, compact and easy to position, the D6 is an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drums, large toms and bass cabinets.  The D6s transformer less design, low impedance and balanced output allow for interference-free performance.

Designed, assembled, and tested by Audix in the USA.

Type Dynamic
Polar Pattern Cardioid
Frequency Response 30Hz - 15kHz
Impedance 280 ohms
Sensitivity .8 mV/Pa @ 80Hz

 

Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum. The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring. Features
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Type Dynamic (moving coil)
Frequency Response 20 to 10,000 Hz
Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Output Level Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL

The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.

Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g

LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps. Technical Info Type: Dynamic, Moving coil. Freq.Resp.: 40 to 16.500 Hz. Polar Pattern: Cardioid Sensitivity (1000Hz): 1,7 mV/Pa* (*1 Pa = 94 dB SPL) Max SPL: 137dB Impedance: 600 Ohm Power supply: none Connector: 3p. XLR male-type). Net. Weight: 245 g Dimensions: (Ø 32 mm x L 157 mm) Accessories: 6 mtr balanced cable with XLR plugsThe e 604 is a cardioid microphone especially suitable for use with drums and brass instruments. Features Rugged reinforced glass-fibre body Low sensitivity to impact and handling noise Very high sound pressure handling capability Low distortion microphone Hum compensating coil Easy to position due to compact design Integral stand mount Delivery Includes 1 e 604 1 drum clip 1 pouch Technical Data Frequency Response  40.....18000 Hz Sensitivity in free field, no load (1kHz)  1,8 mV/Pa Min. terminating impedance  1000 Ohm Dimensions  d 33 x 59 mm Weight w/o cable  60 g
Weight1.00 kg0.80 kg0.14 kg0.35 kg0.24 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.80 kg
Weight 0.14 kg
Weight 0.35 kg
Weight 0.24 kg
Weight 0.10 kg