| Content | STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
| The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
| SUM40 USB condenser microphone
- Uses: Music recording, voice-over, podcasting
- Capsule: Condenser
- Polar pattern: Cardioid
- Sensitivity: - 53 dB +/- 3 dB
- Frequency response: 50 Hz to 18 kHz
- Maximum sound pressure level: 75 dB
- Compatibility: Windows and Mac OS X, without additional driver
- Connector: Type B USB
- Headphone output: 3.5 mm (1/8“) mini jack
- Colour: Black
This USB back electret condenser microphone is perfect for musicians needing to record vocals and instruments alike. This clear and precise sounding mic features smooth frequency response.
Polar Chart:Cardioid |
Reloop SPodcaster Condenser Microphone USB. Suitable for any type of broadcasting via computer, as connected directly to your PC or Mac without requiring a sound card with high-speed USB 2.0, all connections are as easy as ever. It features a condenser capsule offers us high quality recording.
Sensitivity: -65 ± 5 dB @ 1 kHz
S / N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 0.35 kg
Includes USB cable, table stand and software |
The Audio-Technica Consumer ATR4650-USB is a compact USB microphone that can be clipped on clothing or mounted to a surface such as a monitor frame making it ideal for vloggers, YouTubers, and live streamers. With its USB Type-C cable and USB Type-A adapter, it conveniently works with USB-equipped smartphones, tablets, and computers.
Operation is simple and straightforward thanks to its plug-and-play compatibility and USB powering. The 6' attached cable allows plenty of slack for you to maintain sufficient distance between the mic and your device. The condenser element's omnidirectional polar pattern picks up sound from all directions, so you don't have to worry about precisely angling the mic.
- Utility USB microphone for computer applications
- Easily portable boundary mic plugs into USB input on a computer, tablet, smartphone or other device
- 1.8 m (6') cable is terminated with USB-C connector, and comes with USB-C to USB-A adapter
- Slim-profile mount for easy attachment to flat-panel monitor or other surface
- Integral clothing clip enables use as a lapel microphone
- Omnidirectional pickup pattern offers full 360° coverage
Microphone
Element : Condenser
Polar Pattern : Omnidirectional
Freq response : 50 - 13,000 Hz
Open circuit sensitivity : -48 dB
Power Requirement : 5v DC
| The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices.
The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns.
The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds.
On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.
The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter.
The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty.
Features
High sensitivity and extremely low self noise
Five switchable polar patterns for placement and application flexibility
Two-color LEDs provide quick visual indication of selected polar pattern and output overload
Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen
High sound pressure level capability and wide dynamic range
Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions
Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors
Specifications
Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg) |
Reviews
There are no reviews yet.