| Content | The HT Venue Series has four outstanding speaker cabinets that are all equipped with Celestion drivers and have been voiced to work with the HT Venue amplifiers, as well as a wide range of other products. All the cabs have finger-locked (comb) joints, heavy duty wiring and a cool vintage styling.
- 1x12 80W
- 16Ω Mono
- Open back design
- Celestion loudspeaker
- Rugged construction
- Designed for use with the HT Venue range
| Power: |
80 Watts |
| Drivers: |
1 x 12" Celestion |
| Dimensions ( W x H x D ): |
62 x 54 x 30 cm |
| Weight: |
17.6 kg |
| Featuring two Celestion Vintage 30 speakers, the PPC212 is in essence our classic 4×12 slashed in half. The large internal volume of the sealed enclosure makes the PPC212 ideal for players looking for the the fattest possible tone when a 4×12″ would be too large. Many players choose to stack two PPC212 cabs for ease of load-in, also giving them the flexibility of using just one for smaller venues. Made in England from high density 13 ply 18mm Baltic birch plywood, the PPC212 is fitted with steel hardware to withstand the rigours of the road. Our unique skid runners fitted to the base helps to acoustically couple our cabinets to the stage for a fuller low end response.
| Power: |
120 Watts |
| Drivers: |
2 X 12? CELESTION VINTAGE 30 |
| Dimensions ( W x H x D ): |
53 X 78 X 38 cm |
| Weight: |
28 Kg |
| Marshall 1960A 300W Guitar Speaker Cabinet
The only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that Marshall's speaker cabinets are also built to stand the test of time. Their highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then they have made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only 6 were ever made.
As a result, we came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs do we hear you ask? Well, two went to Pete Townshend, two went to John Entwhistle and the remaining two went to the Small Faces. The Marshall stack, on the other hand, has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As we invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
The 1960A is switchable from mono [4 or 16 Ohms] to stereo [8 Ohms per side], and is equipped with Celestion G12T-75 speakers.
The highest quality woodwork includes the "corner locking" of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
No sharp metal edges or rough fittings ??? the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all 8 cabinet corners.
Technical Info
Black grille cloth
White piping
Black elephant grain vinyl
Speaker: 4 x 12 in. G12T-75
Power: 300 watt
Impedance: 4 or 16 ohms mono/8 ohms stereo
Dimensions: 760 x 830 x 360mm
Weight: 36.4 kg | Info
The lower cost MX212, 2 x 12'' cab can be used with most Marshall heads, or as an extension cab for a 2 x 12'' combo, which adds great flexibility to your setup. This mono cab, covered in Marshall Tolex, featuring the iconic Marshall baffle logo is loaded with Celestion Seventy 80 speakers. | Hand Soldered, 120 Watt 4x12 Straight Front
To complement the 1959HW's visual sonic majesty we offer the 1960AHW (angled) and 1960BHW (straight) 4x12" cabinets that boast Basket Weave fret cloth, metal handles, "100" logos and are loaded with Celestion's highly-acclaimed G12H-30 re-issue speakers.
The 1960AHW and 1960BHW Cabinets match the 1959HW heads perfectly. Both are 120 Watt, 16 Ohm mono 4x12" cabinets featuring salt-n-pepper grille cloth, metal handles, and loaded with the bass version of Celestion's reissue of the G12H30 speaker.
The timeless tone of vintage handwired, all-tube Marshall amplifiers have made them highly desirable to collectors and sonic connoisseurs alike. Due to overwhelming public demand, Marshall is proud to introduce meticulous, handwired re-issues of three of their most sought-after amplifiers as the first products in our brand new Handwired Series – a Series that celebrates the company's rich tonal heritage and revisits the handcrafted traditions and skills that first launched the Marshall legend.
Marshall 1960BHW Specifications:
- Cabinet Type: Base (straight, flat front)
- Speaker Type: G12H-30
- Speaker Configuration: 4 x 12 inches
- Power (RMS): 120 Watts
- Impedance: 16 Ohms
- Dimensions (mm): 760 x 830 x 360 (approx. 30 x 33 x 14.2 inches)
- Weight (kg): 36.4 (approx. 80 lbs.)
|
1960A JOE SATRIANI SIGNATURE CAB The Marshall 1960A JSB Joe Satriani Speaker Cabinet is an external speaker cabinet to match the JVM410HJSB Head, offering 300 watts of power. The Marshall 1960A Joe Satriani has been made to Joe's specifications and preferences, featuring four 12 inch Celestion 75 watt speakers, housed in a rugged, special blue colour chassis.
Features/Specifications: 1960AJSB:
- Type: Speaker Cabinet
- Output (RMS): 300 Watt
- Speakers: 4 x 12" Celestion 75 speaker
- Impedance: 16/4 Ohm Impedance (Mono)/8 Ohm Impedance (Stereo)
- Dimensions (mm): 760 x 830 x 365
- Weight (kg): 36.4Kg
|
Reviews
There are no reviews yet.