Content |
PREMIUM SOUND. HEAD-TURNING PERFORMANCE
Hummingbird is a versatile, precision-engineered Class A small-diaphragm microphone that unlocks the tonal nuances of your instruments so you can capture the best recordings possible.With a 180 degree rotating head, Hummingbird fits into tight spaces and can nimbly change positions where others canʼt.
Featuring a precisely tuned diaphragm based on the acclaimed B1 capsule from Blueʼs flagship Bottle microphone, Hummingbird is ultra-responsive and delivers extended frequency response. Hummingbird is the perfect studio and stage solution for drum overheads, acoustic guitar, piano, percussion, or any other instrument with fast transients and rich overtones.
-
Adjustable small-diaphragm condenser microphone with rotating head
-
180° rotating head for precise mic placement
-
Cardioid condenser based on the B1 capsule from the heralded Blue Bottle
-
Exceptional sonic accuracy and extended frequency response
-
Ultra-fast transient response and high-SPL handling in the studio and on stage
MIC PLACEMENT IS EVERYTHING
Discover new tonal colors of your instrument by simply rotating Hummingbirdʼs head. The unique 180° pivoting head allows you to place the mic at any angle—without having to adjust the mic stand—and capture the sound most mics would leave behind. Give Hummingbird a turn, and take your recordings from good to great.
-
Sweep the capsule between the 12th fret and sound hole of an acoustic guitar to dial in the perfect guitar sound, all without having to get up out of your chair.
-
Rotate the capsule between the edge of the snare drum and the center of the drumhead to get the perfect snare sound, all without having to adjust the mic stand.
-
Pivot the heads of a pair of Hummingbird overheads to dial in the perfect stereo image over a set of drums, percussion, or upright piano
PREMIUM BLUE CAPSULE
Hummingbird boasts a premium capsule based on the Blue B1—part of our acclaimed interchangeable Bottle Caps series. Hummingbirdʼs precisely tuned cardioid capsule is ultraresponsive and provides extended high-frequency response—making it perfect for recording any instrument with quick attacks and rich tonal characteristics.
TAKE YOUR SOUND TO NEW HEIGHTS
The superb dynamic range, balanced character and sparkling high end of the Hummingbird is perfect for reproducing the sharp attacks and tonal characteristics of a wide range of instruments including drums, acoustic guitars, strings and world instruments. And with no ICʼs in the signal path, Hummingbird delivers maximum sonic detail with the lowest possible noise floor. With excellent off-axis rejection, Hummingbird is the perfect choice for close-miking drums or percussion while minimizing sound from surrounding instruments.
DRUMS—FROM A BIRDʼS EYE VIEW
The Hummingbirdʼs agility, sonic precision, and ability to handle high sound pressure levels make it an ideal mic for recording drums. With a 180° pivoting head, Hummingbird makes it easier to get great overhead sounds, and it can fit into tight snare drum or rack tom spaces and get the perfect angle on the drumheads—a difficult task with other condenser microphones.Technical specifications :
-
Transducer Type: Condenser, Pressure Gradient
-
Polar Pattern: Cardioid
-
Frequency Response: 20Hz - 20kHz
-
Sensitivity: 15mV/Pa @ 1kHz (1 Pa = 94dB SPL)
-
Output Impedance: 50Ω
-
Rated Load Impedance: Not less than 1kΩ
-
Maximum SPL: 130 dB SPL
-
S/N Ratio: 85.5 dB-A (IEC 651)
-
Noise Level A-Weighted: 8.5 dB-A (IEC 651)
-
Dynamic Range: 129.5 dB (2.5kΩ)
-
Power Requirement: +48V DC Phantom Power (IEC 268-15)
-
Weight: 212g (7.5oz)
-
Dimensions: 170mm x 27mm x 27mm (6.7” x 1.1” x 1.1”)
Included Accessories
| AKG C411L Ultralight Condenser Microphone
- Ultra-light vibration pickup
- Condenser transducer in sealed enclosure
- Cable with lockable miniature XLR connector
Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound.
C 411 L: With mini XLR connector for use with B 29 L battery operated power supply, MPA V L external phantom power adapter, or AKG WMS bodypack transmitters.
Frequency range |
10 to 18,000 Hz |
Max. SPL |
100 dB (for 1% THD) |
Impedance |
200 ohms unbalanced |
Recommended load impedance |
>=1000 ohms |
Supply voltage |
9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L or AKG bodypack transmitter |
Current consumption |
approx. 2.2 mA |
Connector |
C 411 L: 3-pin mini XLR |
Cable |
C 411 L: 1.5 m (5 ft.) |
Finish |
matte black |
Dimensions |
27 x 14 x 9.5 mm / 1.1 x 0.5 x 0.3 in. |
Net weight |
C 411 L: 18 g / 0.7 oz. |
Shipping weight |
C 411 L: 150 g / 5.5 oz. |
|
Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.
Specifications
Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption: |
The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.
The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.
The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.
- Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
- Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
- Mono compatibility ideal for broadcast applications
- 40 to 20,000 Hz frequency response
- Low noise and distortion
- Wide dynamic range
- Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
- Operates on phantom power or a 6V camera battery
- LED power indicator
- Internal shock mount for reduced stand vibration and handling noise
- Built-in "pop" screen
- Includes windscreen, swivel adapter, and Y-cable
|
Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound.
C 411 PP: For hardwire applications, with standard XLR connector for phantom powering. |
The e 865 is a fully professional super-cardioid vocal microphone utilising the very best in condenser microphone technology to achieve new standards of quality and sound. The microphone capsule insorporates special blast/pop protiction plate to shield the diaphragm from excessive sound pressure levels. ON/OFF Switch.
- Pick-up pattern : super cardioid
- Sensitivity in free field, no load : (1kHz) 3 mV/Pa
- Max. Sound pressure level (aktiv) : 150 dB
- Nominal impedance : 200 Ohm
- Min. terminating impedance : 1000 Ohm
- Dimensions : d 47 x 193 mm
- Weight : w/o cable 311 g
- Frequency response (microphone) : 40.....20000 Hz
- Phantom powering : 12 - 48 V
|
Reviews
There are no reviews yet.