Content |
Ideal at the centre of most home theatre systems, the HTM62 S2 is the smaller centre speaker that still excels at delivering power and precision.
Like its bigger sibling the HTM61 S2, the HTM62 S2 now features an improved Decoupled Double dome tweeter design, ideal for delivering the clarity needed for dialogue. The double dome delivers a more precise response, while decoupling the tweeter from the main enclosure removes unwanted resonances and vibration. The result is absolutely clear.
The HTM62 S2 also features two 5-inch drivers that use Kevlar cones, for an ideal mix of punch and precision. The result, combined with the Decoupled Double Dome tweeter, is a centre speaker that sounds simply stunning.
The clarity and power of the HTM62 doesn't command a space premium either. Smaller than the HTM61, it's absolutely at home in just about any setup. And like the HTM62, it can be used horizontally or vertically, depending on space.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone bass/midrange
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
2x ø130mm (5 in) woven Kevlar® cone bass/midrange | Frequency range | -6dB at 48Hz and 50kHz | Frequency response | 70Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 20º arc
Vertical: over 60º arc | Sensitivity | 87dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 90Hz-24kHz
Lower -3dB Limit 125Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 91 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Non-resonant curved enclosure with time-alinged driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.50 lbs. (2.04kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Frequency Response: 32 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Twin Ported HiVe II Technology Sealed Mid-range TLE Mid / H.F Crossover Frequency: 4000 Hz Bass Low Pass Crossover Frequency: 550 Drive Unit Complement: 2 x 8 long-throw RDT bass drivers 1 x 4" RDT Mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand (H x W x D): 288 x 800 x 368 mm (11 5/16 x 31 1/2 x 14 1/2 inch) Stand External Dimensions - Including Plinth Feet (H x W x D): 335 x 610 x 463 mm (13 13/16 x 24 x 18 1/4 inch) Weight: 33.5 Kg (73.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22
|
HF Unit: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped. Magnetically shielded. Exclusively Profiled.
MF Unit: 110mm mid range driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
LF Unit: 110mm mid/bass driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
Power Handling: 150 watt max
Overall Frequency Response: 55Hz – 23kHz
Sensitivity: 90dB
Impedance: 8 ohms
Cabinet: Real wood veneered. 15mm MDF wrap. Dual chamber. High power, back firing, low turbulence bass reflex port. 22mm front baffle
Terminals: Gold-plated 4-way binding posts
Dimensions: WxHxD 450 x 180 x 297 mm
Weight: (exc packaging) 8kg each
|
Reviews
There are no reviews yet.