| Content |
The SR-C15B Sub-woofer system is designed to be used in conjunction with the SR-C8L or SR-C8S Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 450 W | | Rated Impedance | 8 Ω | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | | Speaker Component | 38 cm (15“) cone-type | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | | Weight | 41 kg (90.39 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8
Digital processor: DP-0206 |
|
The HX-5W-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in directivity. It is ideal for reproducing clear sound in spaces with long reverberation times or high background noises. The HX-5W-WP is designed for outdoor use.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous pink noise: 200 W, Continuous program: 600 W | | Rated Impedance | 8 Ω | | Sensitivity (1 W, 1 m) | 96 dB (60゜ mode), 97 dB (45゜ mode), 98 dB (30゜ mode), 99 dB (15゜ mode) * | | Frequency Response | 95 - 20,000 Hz (-10 dB) (60゜ mode), 100 - 20,000 Hz (-10 dB) (45゜ mode),
105 - 20,000 Hz (-10 dB) (30゜ mode), 110 - 20,000 Hz (-10 dB) (15゜ mode) | | Crossover Frequency | 4 kHz | | Directivity Angle | Horizontal: 100゜ (over 2000 Hz)
Vertical: 60゜ (over 800 Hz), 45゜ (over 1.2 kHz), 30゜ (over 1.6 kHz),
15゜ (over 3.2 kHz) variable | | Speaker Component | Low frequency: 12 cm cone-type × 4, High frequency: Balanced dome-type × 12 | | Speaker Cord | 2-core cabtyre cord with diameter of 6 mm | | Water Protection | IPX4 (Install with the every speaker module downward.) | | Operating Temperature | -15%%dc to +50%%dc | | Finish | Enclosure: Polypropylene, white
Punched net: Surface-treated steel plate, white, rust proof coating | | Dimensions | 408 (W) × 546 (H) × 342 (D) mm | | Weight | 16 kg | | Accessory | Hanging bracket …2, Hex. wrench …1 | | Option | Matching transformer: MT-200
Speaker mounting bracket: HY-PF1WP, HY-CW1WP, HY-WM1WP, HY-WM2WP,
HY-CN1W-WP | * (Factory-preset: 60゜ mode)
|
The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34)
,conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft) | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“)“ | | Weight | 16 kg (35.27 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
| Features : | | Specifications : |
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
| - JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
| - VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
| - Constant Curvature waveguide for unprecedented array coherence.
| - Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
| - Array Configuration Selector permist "array shading“.
| | |
| Power Rating | : | 1750 Watts Peak
875 Watts Continuous |
| | Frequency Range | : | 57 Hz - 20 kHz
(-10 dB) |
| Dimensions
(H x W x D) | : | 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
| | Frequency Response | : | 75 Hz - 20 Hz
(+/-3db) |
| | Maximum Peak Output | : | 136 dB SPL at 1m |
| | Coverage Pattern | : | 100 x 15 nominal |
| | DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
| | DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
| | Autio Input Connector | : | XLR with loop through |
| | LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| | HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
| | User Controls | : | Input Attenuator (0-16 dB) |
| | Signal Processings | : | DSP based, resident in Input Module |
| | AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
| | AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
| | AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
| | AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
| | Enclosure | : | 25/15 mm, 11-ply birch plywood |
| | Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| | Finish | : | Black DuraFlex™ finish |
| | Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| | Net Weight | : | 24 kg (52 lb) |
| | Optional Accessories | : | VRX-AF: Suspension array frame | | |
|
The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 450 W | | Rated Impedance | 8 Ω | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | | Speaker Component | 38 cm (15“) cone-type | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“), 4-core cable, 3 m (9.84 ft) | | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | | Weight | 41 kg (90.39 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
HX-5W
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules
independently allows the directivity angle of the speaker system
to be adjusted. Built-in passive network ensures appropriate sound
quality. Ideal for both permanent and temporary installations,
including both vertical and horizontal positioning. Equipped
with a convenient carrying handle. Can be mounted directly on
a wall or suspended by wire, chain or shackle with no need
to use optional brackets. Optional mounting brackets allow
use in a wide variety of applications, including suspension,
ceiling mounting, wall mounting, and speaker stand mounting.
Mounting procedures are described in the instruction manuals
enclosed with the mounting bracket or stand adapter.
Specifications:
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600WRated
Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode),
98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode)
75 to 20,000 Hz (45° mode) 80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz),
45° (over 1 .2 kHz), 30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4
High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, white
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,
HY-CW1W,HY-WM1W,HY-WM2W,HY-CN1W, Speaker stand adapter:HY-ST1 |
Reviews
There are no reviews yet.