CELESTION T1281 WOOFER 12” HERITAGE 15 OHM FOR GUITAR AMP 30W 100dB

	CELESTION T1281 WOOFER 12'' HERITAGE 15 OHM FOR GUITAR AMP 30W 100dB remove	B & C Speakers 12-CX32 Speaker coaxial 12", 350W, 99dB remove	CELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W remove	B & C Speakers 12-TBX100 SPEAKER subwoofer 12 inch 1000W, 95dB remove	EMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more remove	CELESTION T5471 WOOFER 12'' ALNICO GOLD 8OHM FOR GUITAR AMP 50W 100dB remove
Name	CELESTION T1281 WOOFER 12'' HERITAGE 15 OHM FOR GUITAR AMP 30W 100dB remove	B & C Speakers 12-CX32 Speaker coaxial 12", 350W, 99dB remove	CELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W remove	B & C Speakers 12-TBX100 SPEAKER subwoofer 12 inch 1000W, 95dB remove	EMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more remove	CELESTION T5471 WOOFER 12'' ALNICO GOLD 8OHM FOR GUITAR AMP 50W 100dB remove
Image
SKU	T1281	12-CX32	T5491	12-TBX100	ED12A	T5471
Rating
Price	€251.03 €186.00 incl. GR VAT	€404.24 €337.73 incl. GR VAT	€245.97 €237.58 incl. GR VAT	€352.16 €317.00 incl. GR VAT	€239.66 €147.55 incl. GR VAT	€382.07 €312.48 incl. GR VAT
Stock	Out of stock	Available on backorder	Available on backorder	Available on backorder	Only 3 left in stock	Only 1 left in stock (can be backordered)
Availability	Out of stock	Available on backorder	Available on backorder	Available on backorder	Only 3 left in stock	Only 1 left in stock (can be backordered)
Add to cart	Read more	Add to cart	Add to cart	Add to cart	Add to cart	Add to cart
Description
Content	If the G12M was to become a classic,it was the G12H with its heavier magnet that really characterised the sound of rock guitar for the new breed of player that emerged in the 1960s.Listen to any Hendrix recording and the chances are youʼre hearing the unmistakably creamy tones of the G12H. Originally available in two versions – low resonance for bassists and high resonance for guitarists – both were in fact embraced by guitar players for their unique tonal characteristics. The new Celestion G12His a perfect recreation of the low resonance model,right down to the voice coil former material,glue formulations and vintage,solder-only tag panel.Suitable for use in all cabs,it exudes thick,syrupy tones with a deep,growling bottom end.   General specifications Nominal diameter 12“, 305mm Power Rating 30WW Nominal impedance 8Ω and 15Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 1.75“, 44.5mm Voice coil material Rounded copper Magnet type Ceramic Magnet weight 50oz, 1.42kg Frequency range 55-5000Hz Resonance frequency, Fs 55Hz DC resistance, Re 6.53Ω & 12.11Ω Mounting Information Diameter 12.2“, 309mm Overall depth 5.3“, 135mm Magnet structure diameter 6.6“, 168mm Cut-out diameter 11.1“, 283mm Mounting slot dimensions 0.31“, 7.9mm Ø Number of mounting slots 4 Mounting slot PCD 11.7“, 297mm Unit weight 10.4lb, 4.7kg	700 W continuous program power capacity 80° nominal coverage 55 – 20000 Hz response 99 dB sensitivity XO-3 dedicated crossover network	12” neodymium woofer offers 300Wrms (AES) continuous power handling and 98dB sensitivity 3” high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression M-roll surround provides progressive excursion control, yielding a smooth response even at extremes of frequency range Extremely lightweight design combined with a highly efficient magnet assembly results in exceptional power-to-weight ratio Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
Nominal diameter (mm/in)	305/12
Power Rating (AES, W rms)	300
Nominal impedance (Ω)	8
Voice coil diameter (mm/in)	76.2/3.0
Magnet type	Neodymium
Chassis type	Cast aluminium
Sensitivity (dB)	98
Frequency range (Hz)	50-4000
Coil material	Round copper
Cone material	Kevlar loaded paper
Surround material	Cloth-sealed
Suspension	Single
Xmax (mm/in)	4/0.16
Gap depth (mm/in)	8.0/0.32
Voice coil winding width (mm/in)	16.0/0.63

Small Signal Parameters

D (m/in)	0.26/10.24
Fs (Hz)	56.4
Mmd (g/oz)	54.41/1.92
Mair	6.92/0.244
Qms	2.74
Qes	0.33
Qts	0.29
Re (Ω)	5.77
Vas (lt/ft3)	51.78/1.828
BI (Tm)	19.61
Cms (mm/N)	0.13
Rms (kg/s)	7.921
Le (mH)	0.778

Mounting Information

Overall diameter (mm/in)	310/12.2
Overall depth (mm/in)	137/5.39
Cut-out diameter (mm/in)	286/11.26
Mounting slot dimensions (mm/in)	6.5/0.26 x 9.5/0.37
Number of mounting slots	8
Mounting slot PCD range (mm/in)	294/11.57
Unit weight (kg/lb)	2.6/5.7

Packed Dimensions and Weight

Single pack size W x D x H (mm/in)	-
Single pack weight (kg/lb)	-
Multipack (60) size W x D x H (mm/in)	1080 x 980 x 880/42.5 x 38.6 x 34.6
Multipack (60) weight (kg/lb)	146/321

2000 W continuous program power capacity
100 mm (4 in) copper voice coil
45 – 1000 Hz response
95 dB sensitivity
Aluminium demodulating ring allows a very low distortion figure
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression

DELTA-12A Standard American Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures. *Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers. Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more   SPECIFICATION

• Nominal Basket Diameter 12“, 304.8 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 400 W / Music Program 800 W
• Resonance 55 Hz
• Usable Frequency Range 54 Hz - 5 kHz
• Sensitivity 98.3
• Magnet Weight 56 oz.
• Gap Height 0.375“, 9.53 mm
• Voice Coil Diameter 2.5“, 63.5 mm

THIELE & Small Parameters

• Resonant Frequency (fs) 55 Hz
• DC Resistance (Re) 6.3
• Coil Inductance (Le) 0.74 mH
• Mechanical Q (Qms) 5.27
• Electromagnetic Q (Qes) 0.46
• Total Q (Qts) 0.43
• Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
• Peak Diaphragm Displacement Volume 125 cc
• Mechanical Compliance of Suspension 0.21 mm/N
• BL Product (BL) 13.5 T-M
• Diaphragm Mass inc. Airload (Mms) 39 grams
• Efficiency Bandwidth Product (EBP) 120
• Maximum Linear Excursion (Xmax) 2.4 mm
• Surface Area of Cone (Sd) 519.5 cm²
• Maximum Mechanical Limit (Xlim) 9.9 mm

MOUNTING Information

• Recommended Enclosure Volume Sealed N/A Vented 25.5-85 liters/0.9-3 cu.ft.
• Overall Diameter 12.03“, 305.5 mm
• Baffle Hole Diameter 10.95“, 278.1 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.25“, 6.4 mm
• Mounting Holes B.C.D. 11.59“, 294.3 mm
• Depth 5.35“, 136 mm

MATERIALS of Construction

• Aluminum voice coil
• Polyimide former
• Ferrite magnet
• Vented core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition felt dust cap

Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.

The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.

General specifications
Nominal diameter	12“, 305mm
Power Rating	50W
Nominal impedance	8Ω and 15Ω
Sensitivity	100dB
Chassis type	Pressed steel
Voice coil diameter	1.75“, 44.5mm
Voice coil material	Round copper
Magnet type	Alnico
Frequency range	75-5000Hz
Resonance frequency, Fs	75Hz
DC resistance, Re	6.4Ω & 11.8Ω

Mounting Information
Diameter	12.2“, 309mm
Overall depth	6.5“, 165mm
Magnet structure diameter	5.0“, 128mm
Cut-out diameter	11.1“, 283mm
Mounting slot dimensions	0.31“, 7.9mm Ø
Number of mounting slots	4
Mounting slot PCD	11.7“, 297mm
Unit weight	9.3lb, 4.2kg

 

Weight4.70 kg11.20 kg2.60 kg11.80 kg4.00 kg4.20 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information

Weight	4.70 kg

Weight	11.20 kg

Weight	2.60 kg

Weight	11.80 kg

Weight	4.00 kg

Weight	4.20 kg