Content |
Dimensions | Metric :46-1/4" W x 4-1/8" D x 5-3/8" H: speaker only, not including bracket | 117.5 x 10.5 x 13.7 cm
Driver Complement :Three 4-1/2" BDSS drivers with Axially Aligned 1" pure aluminum dome tweeters; Two 4-1/2" BDSS High-output full-range drivers; Four 3-1/4" full-range high-output surround drivers
Frequency Response :50 Hz – 30 kHz
Accessories :Wall bracket; Leveler Feet
Sensitivity :90dB
Recommended Associated Amplifier Power :20 – 200 watts
Inputs :Five pairs of 5 way binding posts
A/V Receiver Crossover Setting :100 Hz
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Impedance :Compatible with 8 Ohms outputs
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler feet
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years
|
Five discrete channels from one superb speaker
The perfect surround audio solution when you are unable or unwilling to
use rear channel speakers
Ultra slim design, only 1-5/8" (4cm) deep, perfect for ultra thin LED TVs
Wall mount bracket and table stand included
The dynamic punch, wide frequency range and broad dispersion of
full size speakers
Aircraft grade extruded Aluminum enclosure
Ten anodized Aluminum dome XTDD drivers
Three pure Aluminum dome tweeters
Frequency Response: 60Hz - 30kHz
Sensitivity: 90dB
Nominal Impedance: 8 Ohms
Dimensions: speaker only, not including
bracket: 114.3 x 4 x 13.2cm.
|
T101 / T101c
Design Two-way closed box
Drive units 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response 80Hz - 30kHz
Crossover frequency 1.7kHz
Amplifier requirements 10 - 100 W
Sensitivity (2.83V/1m) 90dB (wall mount)
87dB (floor stand mount)
Maximum output (SPL) 107dB
Impedance 8Ω
Internal volume 0.7 Litres
Weight 1kg (2.2lbs)
Dimensions
(H x W x D) 330* x 140 x 35 mm
(13.0 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode 140 x 330 x 35 mm
(5.5 x 13.0 x 1.4 in.)
Finish Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.
T-2
Design Closed box powered subwoofer
Drive units 1 x 250mm (10in.)
Frequency response 30Hz - 250Hz
Amplifier 250 Watts built-in Class-D
Maximum output (SPL) 110dB
Low pass filter variable Fixed 250Hz, 2nd-order
Low level signal inputs RCA phono socket
Internal volume 12.7 Litres
Power requirements 100 - 240 V ac ~ 50/60Hz
Power consumption 250VA
Weight 13kg (28.6lbs)
Dimensions
(H x W x D) 380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.
|
Dimensions | (Metric) :23-1/2" W x 6-3/4" H x 14-1/16" D | 59.7 x 17.1 x 35.7 cm
Driver Complement :One cast basket 8" subwoofer; Two cast basket 5-1/4" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :20 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Accessories :Feet (3)
Packaging :One to a carton
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Fuse :
Available Finishes :Piano-Gloss Black
Warranty :5 Years; 3 Years for Amplifiers
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Weight | (Metric) :37 lbs | 16.8 kg
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3-1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator tweeter
Electrical
Overall Frequency Response 45Hz-40kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 30kHZ
Nominal Impedance Compatible with 8 Ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 83 dB
Crossover Orth Crossover design
Crossover
(mid-high array) 2400Hz
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16-1/4" H x 19-23/25" W x 6-3/4" D
(41.27cm H x 50.60cm W x 17.14cm D)
Mounting Options keyhole slots for wall mounting; pedestal for shelf mounting
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort Bass venting
Shipping/Other
Product Weight 28.90 lbs. (13.11kgs)
Shipping unit: pair
Total Shipping Weight 62.10 lbs. (28.17kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)
310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands: 11.9 Kg (26.1 lbs)
|
Reviews
There are no reviews yet.