DEFINITIVE TECHNOLOGY Mythos SSA-50 Surround Loudspeaker BLACK

Dimensions | Metric :46-1/4" W x 4-1/8" D x 5-3/8" H: speaker only, not including bracket | 117.5 x 10.5 x 13.7 cm
Driver Complement :Three 4-1/2" BDSS drivers with Axially Aligned 1" pure aluminum dome tweeters; Two 4-1/2" BDSS High-output full-range drivers; Four 3-1/4" full-range high-output surround drivers
Frequency Response :50 Hz – 30 kHz
Accessories :Wall bracket; Leveler Feet
Sensitivity :90dB
Recommended Associated Amplifier Power :20 – 200 watts
Inputs :Five pairs of 5 way binding posts
A/V Receiver Crossover Setting :100 Hz
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Impedance :Compatible with 8 Ohms outputs
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler feet
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years

Five discrete channels from one superb speaker
The perfect surround audio solution when you are unable or unwilling to
use rear channel speakers
Ultra slim design, only 1-5/8" (4cm) deep, perfect for ultra thin LED TVs
Wall mount bracket and table stand included
The dynamic punch, wide frequency range and broad dispersion of
full size speakers
Aircraft grade extruded Aluminum enclosure
Ten anodized Aluminum dome XTDD drivers
Three pure Aluminum dome tweeters
Frequency Response: 60Hz - 30kHz
Sensitivity: 90dB
Nominal Impedance: 8 Ohms
Dimensions: speaker only, not including
bracket: 114.3 x 4 x 13.2cm.

Dimensions | (Metric) :23-1/2" W x 6-3/4" H x 14-1/16" D | 59.7 x 17.1 x 35.7 cm
Driver Complement :One cast basket 8" subwoofer; Two cast basket 5-1/4" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :20 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Accessories :Feet (3)
Packaging :One to a carton
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Fuse :
Available Finishes :Piano-Gloss Black
Warranty :5 Years; 3 Years for Amplifiers
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Weight | (Metric) :37 lbs | 16.8 kg

The SR-8040HD is built to the same high performance standards as Definitiveʼs main left and right front speakers and includes features like high-definition second generation patented BDSS bass/midrange drivers with butyl rubber surrounds, wide-dispersion pure aluminum dome tweeters, complex crossover networks and rock-solid cabinet construction. It can be mounted to a wall with the integrated keyhole plate or it can be placed atop a shelf or after-market stand. However you use the SR-8040BP youʼll enjoy superior surround sound realism.

The Bipolar Advantage
Definitiveʼs SR-8040HD is a bipolar system containing two complete full-range speaker systems, one on each side of the cabinet. Bipolar radiation spreads the surround signals evenly throughout your room for a more enveloping sense of you-are-there realism than could be achieved with conventional forward-firing speakers.

The SR-8040HD is a full-range, extremely linear, low-distortion system which is timbre-matched to blend perfectly with all Definitive BP series speakers as well as other high-quality speaker systems. The SR-8040HD wide dynamic range, high-definition sound quality and its bipolar radiation pattern results in total immersion in the musical event or movie soundstage.

Bipolar Surrounds are Easy to Use
Definitive's bipolar surrounds are designed for easy and unobtrusive placement in your room. Easy-to-use mounting plates are included for wall mounting. Definitive's BP surround speakers may be located on the sides or rear of the room (or both as in 6.1 and 7.1 channel installations) with excellent results.

Patented Technology Delivers High Definition and Wide Dispersion
Dispersing the surround channel sound evenly over a broad area of the room is vital for creating the enveloping youʼre-in-the-action experience movie directors intend for you to experience. Weʼve engineered the SR models with our latest generation ultra-high definition midrange drivers that set new standards for wide dispersion and clean, accurate reproduction.

The drivers used in the SR-8040BP are 3-1/2" second generation BDSS drivers. BDSS is Definitiveʼs patented Balanced Double Surround System technology that supports the speaker cone at both the inner and outer edges allowing longer, more linear excursion for greater clarity and finely textured inner detail. A new patent pending Linear Response Waveguide™ smoothes off-axis frequency response and disperses sound over a wider area for crystal clear intelligibility and life-like envelopment for every listener in the room. The tweeters are pure aluminum domes, which has been heat-treated to relax the crystal structure and then coated with a ceramic to produce extended highs that reveal nuance and shimmer without a trace of edginess.

The Proof is in the Listening
Now that youʼre thoroughly impressed with the technology and passion weʼve poured into the SR-8040BP it is time to find a stocking dealer near you to audition this remarkable achievement of art and science.

Dimensions :9-1/2" H x 7-13/16" W x 5-3/8" D | 24cm H x 19.8cm W x 13.5cm D
Driver complement :2 each 3-1/2" BDSS drivers, 2 each 1" aluminum dome tweeters
Frequency response :50Hz - 30kHz
Sensitivity :92dB
Nominal impedance :8 Ohms
Recommended amplifier power :20 - 150 WPC
Inputs :One pair of 5 way binding posts
Weight :8 lbs. | 3.6kg
 

System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)

310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands: 11.9 Kg (26.1 lbs)

AVAILABLE IN SIX COLOR FINISHES