| Content |
Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
With countless Bluetooth-enabled audio sources roaming the planet, the DN-200BR interfaces them all with a professional audio system for sound reinforcement, special event or retail applications. It receives Bluetooth signals wirelessly, then routes the audio to balanced XLR or ¼-inch outputs for integration with mixers and amplification systems. Its Bluetooth Pairing mode ensures a secure connection.
- Adds Bluetooth to any audio system
- Balanced XLR and unbalanced 1/4-inch audio outputs
- Up to 33m (100 ft) range
- Discreet, robust build quality that can mount nearly anywhere
| Features
Desktop or portable digital-to-analog convertor
Mac or PC plug-and-play, no drivers to install
High-performance headphone amp included
USB and optical inputs
USB-powered, no separate power supply needed
Stream bit-perfect HD audio with low jitter
Based on high-performance AK4396 DAC
Works With
Any computer (Mac or PC)
Headphones
Apple TV or any product with optical outputs
Powered speakers
Any audio system with mini-jack or RCA inputs
DAC type
Dual Mode USB and Optical (SPDIF)
Inputs
USB/Optical (SPDIF)
Outputs
RCA stereo/3.5mm headphone
D/A converter
AKM4396
Optical receiver
CS8416
USB controller
TI1020B
USB device class
Type 1.1 or above
Full-scale output
2.0V RMS
Output impedance
10 ohms
Power source
USB 5V
Power requirements
5V DC, 200mA
USB power filtering
2-stage redundant regulation
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) | Overview: 2.0 speakers plus wireless subwoofer Hi-Fi class planar diaphragm tweeters 4 inch (105 mm) aluminum mid-range drivers Wireless subwoofer with 8 inch long-throw speaker driver Bluetooth 4.1 with Qualcomm® aptX™ decoder Class-D high efficient amplifier with DSP technology MDF wooden enclosure to reduce sound resonance
Features:
Power output :R/L (treble): 10W+10W
R/L (midrange and bass): 30W+30W
SW: 75W
Signal to noise ratio :R/L: ?85dB(A)
SW: 85dB
Frequency response :R/L: 60Hz – 40KHz
SW: 40Hz – 150Hz
Input type :PC/AUX/Optical/Coaxial/Bluetooth
Driver unit :Bass unit: 8-inch (220mm)
Mids+bass unite: 4-inch (105mm) x 2
Tweeter unit: Planar diaphragm tweeter x 2
| Audioengine B2 Premium Bluetooth Speaker
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly
stream all your music from any Bluetooth®-enabled device. Your
computer, iDevice, or Android phone already has Bluetooth, so get more
out of your music with the B2 wireless speaker. Experience award-winning
Audioengine® stereo sound, including a hand-built wood cabinet,
Bluetooth® aptX® and extended wireless range.
Easy setup
Setup
and pairing is really easy and no special software is needed. Hereʼs
how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
Versatile
The
audio quality of most Bluetooth products isn't usually very inspiring
and their limited range can be frustrating. The B2 solves these problems
by implementing the aptX codec, which is a high-quality audio converter
designed specifically for audio. The B2 also has special circuitry and a
precision-tuned antenna to extend the wireless range, providing much
more versatility than other Bluetooth speakers.
Upgrade your Bluetooth
You
already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B2
Bluetooth Speaker including aptX, extended range, hand-built wood
cabinet, and custom speakers.
See and hear the difference
The
hand-finished all-wood cabinet of the B2 reflects traditional
Audioengine design and the high-quality components and audio fidelity
are typical of Audioengine's commitment to great sound at affordable
prices. The Audioengine B2 continues to close the gap between your
computer music and home hi-fi and even if you're not an audio enthusiast
we guarantee your music will sound better!
| Type |
Powered Bluetooth speaker |
| Inputs |
Bluetooth, 3.5mm stereo mini-jack analog |
| Power Output |
60W peak total |
| Input Impedance |
10K ohms unbalanced |
| Frequency Response |
65Hz - 22kHz (+/-2dB) |
| SNR |
>95db (typical A-weighted) |
| THD+N |
|
|
Transmits both pre-amp out and LFE signals
Eliminates subwoofer cables, sending uncompressed bass signals to your subwoofer
Has an external antenna for up to 50 feet of high-quality transmission
Transmitter dimensions: 1" x 5" x 3“
Receiver dimensions: 2-3/4" x 1-3/4" x 1-3/4“
Converts any of the subwoofers
Pro440wi- Pro550wi – Pro660wi literally in seconds. |
Arylic S10 WiFi Music Streamer, leverage your traditional sound system or upgrade your professional equipment by creating a smart music playback system from your mobile phone, tablet or USB drives and networked hard drives.
The Arylic S10 streams your favorite music through the most popular platforms such as Tidal, Amazon Music or Spotify, accesses countless networked radios, can "read" and play music from NAS, USB sticks or via AIRPLAY, connect devices via AUX and micro USB. Finally, it features multimedia communication protocols such as, DLNA, UPnP and QPlay for playback from third-party programs.
The free 4Stream app for iOS and Android is the control center of the Arylic S10. The management of sources, selection of listening rooms, volume level, EQ, content and many other functions are managed directly and easily through the app. By adding more S10s you can build a multi-room system in your venue that is controlled directly from the app
Technical Characteristics
Wireless Epicon
Wifi IEEE 802.11 b/g/n 2.4G
Bluetooth 5.0 SBC/AAC, 10M
Streaming protocols: AirPlay 2, DLNA, UPnP, Spotify connect, Qplay
Inputs / Outputs:
Inputs: 1 x AUX IN (3.5mm).
Outputs: 1 x AUX OUT (3.5mm).
Wired connection: Ethernet RJ45 In
USB port
Micro USB port
Encoding:
File Types: FLAC/MP3/AAC/AAC+ ALAC/APE/WAV
Audio Decode Up to 24bit/192kHz
Audio Output 44.1khz/16bits, CD quality
Frequency response 20Hz-20kHz
Streaming Sources: Spotify, Deezer, Tidal, Qobuz, iHeartRadio, Napster, Internet Radio
The 4stream app for iOS and Android is available for free
Weight: 0.2 kg
Dimensions: 116.2 x 64 x 22.6mm
Operating Temperature: 0~40 c
|
Reviews
There are no reviews yet.