Features 4 XLR inputs; 2 in the front for convenience Pre-fader and post-fader aux sends; stereo aux return Dual multi-segmented LED meters and a Master output fader allow you to easily monitor and control your levels Convenient front panel jacks add versatility Space-saving 3U rackmount design is perfect for venues and mobile rigs Bluetooth streaming […]
Pre-fader and post-fader aux sends; stereo aux return
Dual multi-segmented LED meters and a Master output fader allow you to easily monitor and control your levels
Convenient front panel jacks add versatility
Space-saving 3U rackmount design is perfect for venues and mobile rigs
Bluetooth streaming with simple single-button pairing
4 high-gain mic/line preamps with inserts
2-band high and low shelving EQ on every channel
Specifications
Inputs
Channels 1-4 (mono)
Mic: XLR with switchable phantom power
Line: 1/4" Mono
Insert: 1/4" TRS
Front: XLR+1/4" combo jacks
(Channels 1 and 2 only—overrides rear jacks
Channels 5-6 (stereo pair)
Line: 1/4" Left, Right
Channels 7-8 (stereo pair)
Line: 1/4" Left, Right
RCA: Left, Right
Channels 9-10 (stereo pair)
Bluetooth: Stereo Streaming In
Ext: 1/8" Stereo (front panel)
Aux Return: 1/4" TRS Balanced Left, Right
Outputs
Main: 1/4" TRS Balanced Left, Right
Monitor: 1/4" Left, Right
Aux Send 1: 1/4“
Aux Send 2: 1/4“
Headphones: Stereo 1/4“
Ext: 1/8" Stereo (front panel
Design
3U Rackmount chassis
Detachable power cable
Dimensions
Height: 5.25“
Depth: 6.25“
Width: 19“
Weight: 8.9lbs
Frequency Response
20 Hz – 50 KHz, ±0.5 dB
Dynamic Range
108 dB
THD+N
Maximum Gain
70 dB (Mic Input to Main Out)
Headroom
24 dB
Bluetooth Specifications
Version: 3.0
Maximum Transmission Power: Class 3, +4 dBm
Transmission Frequency: 2.4 GHz
Transmission Range: Up to 100 feet / 30.5 meters
Receiver Sensitivity:
Supported Profiles: A2DP
Power
Input Voltage
115 VAC, 60 Hz; 230 VAC, 50 Hz
Rear panel voltage selector
Fuse
115 VAC, 60 Hz: T630 mAL 250 V
230 VAC, 50 Hz: T315 mAL 250 V
Dimensions (width x depth x height)
19.0” x 6.25” x 5.25”
48.3 cm x 15.9 cm x 13.3 cm
Weight
8.9 lbs.
4.0 kg
5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
1 DJ microphone channel with talkover selector and 2-band equalizer
Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
Replaceable crossfader for crossfading between input channels with assignment switches
10-digit stereo LED level meter, master level control, and balance level control
Adjustable zone output, and record output, independent of the master
Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
Operation via supplied power unit
Rack installation, 4 U
Power supply:
230 V AC, 50 Hz ~,
via supplied power unit
Power consumption:
30 W
Inputs:
DJ MIC (front):
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.)
MIC 1,2 (rear):
6.3 mm jack (1/4“) (bal.)
Impedance:
1 kohms
Minimum input voltage:
1.5 mV RMS
LINE 1-5:
stereo RCA
Impedance:
27 kohms
Minimum input voltage:
150 mV RMS
PHONO 1,2:
stereo RCA
Impedance:
47 kohms
Minimum input voltage:
3 mV RMS
Outputs:
MASTER:
stereo RCA, stereo XLR (3-pin)
ZONE:
stereo RCA
Impedance:
400 ohms
Output voltage:
1 V RMS/ 0 dB
REC:
stereo RCA
Impedance:
5 kohms
Output voltage:
225 mV RMS
Headphones:
6.3 mm stereo jack (min. 16 ohms)
Tone control (DJ MIC):
1x High:
-12 dB to +12 dB/ 1 kHz, ±1 dB
1x Low:
-12 dB to +12 dB/ 1 kHz, ±1 dB
Tone control (channels 1-5):
5x High:
-12 dB to +12 dB/ 1 kHz, ±1 dB
5x Mid:
-12 dB to +12 dB/ 1 kHz, ±1 dB
5x Low:
-12 dB to +12 dB/ 1 kHz, ±1 dB
S/N ratio:
>80 dB
Frequency range:
20-20,000 Hz
Distortion:
0.02%
Dimensions (WxHxD):
483 x 179 x 94 mm (19“, 4 U)
Weight:
4 kg
Since 1984 the SCLAT mixing desks have been rocking thousands of class venues around the world, serving the most demanding technicians, the most creative pro-Djs and the most exciting dance floors.
Behind the renowned experience of ECLER Laboratories, the SCLAT 200vs keeps combining all the requirements technicians demand regarding features and operating safety together with the inventive functionality Professional DJs demand from a high-end mixing desk.
Designed to optimize the best high-end club P.A.s, featured to fit any studio recording standard, built to withstand the most demanding mobile touring set-ups, the SCLAT 200vs is probably the best quality Audio Mixing Desk presently available in the Industry.
Superior effects processor
Remix live...
Built-in processor with double DSP featuring 2 manual filters and 10 effects with BPM synchronization. Includes a DRY/WET crossfader taking your effects control to the next level: activate and deactivate, fade in to the level of your choice… Allows routing every single channel to the module independently. Features control of TIME and PARAMETER and a friendly user selectable panel. Effects consists of LFO Filter, Low Pass Filter, High Pass Filter, Delay, Reverb, Flanger, Phaser, Vocoder, Pitch Shifter, Echo Reverb, Filtered Echo and Flanger Echo.
Midi out
Control you favorite devices...
The module includes a MIDI output and features start and stop commands to activate and deactivate your devices and a clock to adjust the tempo.
Edi:lab software
Expand your creativity...
The built-in effect processor is reprogramable in real-time with the edi:lab software (included). The user can load a new effect set-up in the SCLAT mixer and play it stand-alone without any need of the computer. An effect library is available in the edi:lab software in order to save the different user set-ups.
The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.
The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.
Massive FX Library
Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.
FX Cascade
The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.
Editable FX Parameters
Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.
Input Matrix
Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.
Trimodal EQ
Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.
Mic/Line Input
With 2 band EQ, gain, cue and mix level and with full access to FX.
High Visibility OLED Display
The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.
Lightweight chassis
DB2's lightweight aluminium chassis is designed to make touring with the console easy.
Integral soundcard
The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.
MIDI control
All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.
X:LINK
X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.
Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option
Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade uses 100% conductive plastic tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.
Professional 7-channel ultra-low noise DJ mixer with state-of-the-art phono preamps
Built-in USB interface for recording and playback of any digital music file. Works with your PC or Mac computer—no setup or drivers required Massive software bundle including Audacity vinyl restoration and recording, Podifier and Golden Ear podcasting software downloadable at www.behringer.com Intelligent, dual BPM counter Super-smooth, long-life ULTRAGLIDE faders (up to 500,000 cycles) VCA-controlled crossfader for utmost reliability and smooth audio performance Adjustable crossfader curve for all mixing styles Awesome XPQ stereo surround effect 3-band kill EQ (-32 dB) with EQ on/off switch on stereo channels, Gain control and precise level meter per channel Monitor function with PFL/main balance control and Split option Automatic talkover function with separate Depth and Sensitivity control Balanced Main and additional zone outputs Subwoofer output with adjustable x-over frequency and level control for separate bass amplification Gold-plated RCA connectors for highest signal integrity High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.