DENON Lectern Podium with active speaker

Discontinued

599.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Powered lectern with built-in 2-way speaker column Gooseneck microphone with XLR base RCA line and 3.5mm playback inputs XLR line output USB-powered lamp and charging sockets AC convenience outlets System 100W RMS (200W Peak) Class-D amplifier Bi-amp design (4) 5.25″ full-range speakers (1) Horn-loaded 1 inch HF driver, 25mm voice coil Output Frequency Range: 80-20kHz […]

 

Read more

  • Powered lectern with built-in 2-way speaker column
  • Gooseneck microphone with XLR base
  • RCA line and 3.5mm playback inputs
  • XLR line output
  • USB-powered lamp and charging sockets
  • AC convenience outlets
  • System
    • 100W RMS (200W Peak) Class-D amplifier
    • Bi-amp design
    • (4) 5.25″ full-range speakers
    • (1) Horn-loaded 1 inch HF driver, 25mm voice coil
    • Output Frequency Range: 80-20kHz
    • Max. SPL: 112dB (@ 1m)
    • Precision electronic crossover and limiter
    • 2-channel audio mixer
  • Microphone
    • Type: Condenser
    • Frequency range: 50-16kHz
    • Max. SPL: 130dB
    • Self Noise: 26 dB
    • Signal-To-Noise Ratio: 68dB
    • Impedance: 200Ω
    • Length: 23.5 in.
    • Weight: 0.35 lbs.
  • Controls
    • Mute button
    • (2) Volume controls (CH 1 and AUX)
  • Inputs
    • (1) XLR microphone input
    • (1) 1/8” (3.5 mm) stereo input
    • (1) RCA stereo input pair (line-level)
  • Outputs
    • (1) XLR output
    • (2) 5V USB Type-A charging ports
    • (2) 110 VAC convenience outlets (European model 1 x 220-240V convenience outlet)
  • Environmental
    • Operating Temperature: 0-50°C
    • Storage Temperature: -20°C – 70°C, 85% RH
  • General
    • Input Voltage 100–120/220–240 V, 50/60 Hz, 1080 W
    • Fuse 100–120 V: T12.5AL 250V / 220–240 V: T6.3AL 250V
    • Dimensions: 24.8 x 15.0 x 47.0in (63.1 x 38.1 x 1194.8cm)
    • Dimensions (footprint of base): 21.5 x 14.5in (54.6 x 36.8mm)
    • Weight: 44.00 lbs. (19.96 kg)
Weight 25.00 kg

Reviews

There are no reviews yet.

Be the first to review “DENON Lectern Podium with active speaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

DENON Lectern Podium with active speaker removeRCF EVOX J8 Active two-way portable array removeLD Systems LDMIX62AG3 2x70Wrms Active 2-Way 6.5" Loudspeaker 4-Channel Mix removeLD Systems CURV 500 ES Portable Modular Array, Entertainer System removeYAMAHA Stagepas-600 BT Portable System PA 680W with Bluetooth removeBEHRINGER PPA500BT PORTABLE PA SYSTEM COMPACT 500-WATT remove
NameDENON Lectern Podium with active speaker removeRCF EVOX J8 Active two-way portable array removeLD Systems LDMIX62AG3 2x70Wrms Active 2-Way 6.5" Loudspeaker 4-Channel Mix removeLD Systems CURV 500 ES Portable Modular Array, Entertainer System removeYAMAHA Stagepas-600 BT Portable System PA 680W with Bluetooth removeBEHRINGER PPA500BT PORTABLE PA SYSTEM COMPACT 500-WATT remove
Image
SKU134.069EVOXJ8LDMIX62AG3LDCURV500ESH010.00030E006731
Rating
Price 599.00 incl. GR VAT 999.00 incl. GR VAT 307.43 incl. GR VAT 1,033.94 incl. GR VAT 1,199.00 incl. GR VAT 612.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Class D amplification with 2 x 280 watts peak power
  • 6.5” custom woofer and 1” HF driver
  • Integrated 4-channel mixer
  • 24-bit DSP with 16 FX Presets
  • Slave output for combination with LD MIX 6 G3 passive loudspeaker
  • Bass reflex enclosure for powerful, punchy bass
  • Dual 16 mm pole mounts for horizontal or vertical orientation
Content
  • Powered lectern with built-in 2-way speaker column
  • Gooseneck microphone with XLR base
  • RCA line and 3.5mm playback inputs
  • XLR line output
  • USB-powered lamp and charging sockets
  • AC convenience outlets
  • System
    • 100W RMS (200W Peak) Class-D amplifier
    • Bi-amp design
    • (4) 5.25" full-range speakers
    • (1) Horn-loaded 1 inch HF driver, 25mm voice coil
    • Output Frequency Range: 80-20kHz
    • Max. SPL: 112dB (@ 1m)
    • Precision electronic crossover and limiter
    • 2-channel audio mixer
  • Microphone
    • Type: Condenser
    • Frequency range: 50-16kHz
    • Max. SPL: 130dB
    • Self Noise: 26 dB
    • Signal-To-Noise Ratio: 68dB
    • Impedance: 200Ω
    • Length: 23.5 in.
    • Weight: 0.35 lbs.
  • Controls
    • Mute button
    • (2) Volume controls (CH 1 and AUX)
  • Inputs
    • (1) XLR microphone input
    • (1) 1/8” (3.5 mm) stereo input
    • (1) RCA stereo input pair (line-level)
  • Outputs
    • (1) XLR output
    • (2) 5V USB Type-A charging ports
    • (2) 110 VAC convenience outlets (European model 1 x 220-240V convenience outlet)
  • Environmental
    • Operating Temperature: 0-50°C
    • Storage Temperature: -20°C - 70°C, 85% RH
  • General
    • Input Voltage 100–120/220–240 V, 50/60 Hz, 1080 W
    • Fuse 100–120 V: T12.5AL 250V / 220–240 V: T6.3AL 250V
    • Dimensions: 24.8 x 15.0 x 47.0in (63.1 x 38.1 x 1194.8cm)
    • Dimensions (footprint of base): 21.5 x 14.5in (54.6 x 36.8mm)
    • Weight: 44.00 lbs. (19.96 kg)

General Specs

  • 128 dB Max SPL
  •  1400 Watt 2-way peak power
  •  DSP Processing with FiRPHASE
  •  12" woofer, high power 2.5" voice coil
  •  8 x 2" ultra compact fullrange 1.0" voice coil
  •  2350x350x450 mm 92.5x13.77x17.71 in (HxWxD)
  •  23,8/52.5 kg/lbs

Acoustical Specs

FREQUENCY RESPONSE:40 Hz ÷ 20000 Hz MAX SPL @ 1M:128 dB HORIZONTAL COVERAGE ANGLE:120° VERTICAL COVERAGE ANGLE:30°

Inputs/Outputs INPUT SIGNAL: bal/unbal 
INPUT CONNECTORS: XRL, Jack
OUTPUT CONNECTORS: XLR
INPUT SENSITIVITY: -2 dBu/+4 dBu

Processor Section CROSSOVER FREQUENCIES:220 Hz PROTECTIONS:Thermal, RMS LIMITER:Soft Limiter CONTROLS:Volume, Boost, Mic/Line

Cabinet Specs CABINET/CASE MATERIAL:PP Composite HANDLES:1 Top GRILLE:Steel

COLOR:Black

Size/Weight HEIGHT:623 mm / 24.53 inches WIDTH:400 mm / 15.75 inches DEPTH:460 mm / 18.11 inches WEIGHT:23.8 kg / 52.47 lbs

System Parameters TOTAL POWER:1400 W Peak, 700 W RMS HIGH FREQUENCIES:400 W Peak, 200 W RMS LOW FREQUENCIES:1000 W Peak, 500 W RMS COOLING:Convection CONNECTIONS:VDE
LD Systems MIX 6 A G3 Active 2-Way Loudspeaker with Integrated 4-Channel Mixer The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 6 A G3 integrates a 4-channel mixer and Class D amplification with 2 x 280 watts peak power. The compact bass reflex loudspeaker features a 6.5" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail. Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels and a stereo line channel with 2-band EQ each plus switchable hi-Z input and 15 V phantom power. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering, an adjustable monitor and RCA recording outputs. In addition, the LD MIX 62 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A 4 ohm slave output allows powering the passive LD MIX 6 G3 for a dual speaker setup. The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. On its own or in tandem with the passive unit, the LD MIX 62 A G3 provides amazing performance and versatility in a lightweight, easily portable package.  
Product type
PA loudspeaker
Type
active
Woofer dimensions
6.5 "
Woofer size
165.1 mm
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Dispersion (H x V)
80 x 70 °
Frequency response
80 - 20.000 Hz
Amplifier
Class D
Amplifier output (RMS)
2x70 W
Amplifier output (peak)
2x280 W
Max. SPL
122 dB
Protection circuits
ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
MIXER
Channels
4
Mic inputs
3
Mic inputs
6.3 mm jack, XLR
Controls for Mic Inputs
DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level
Input Impedance Mic Inputs
14 kOhm
Input Sensitivity Mic Input
70 mV
Line inputs
1
Line input connectors
2 x RCA
Controls Line Inputs
DFX Send, EQ Hi, EQ Low, level
Input Impedance Line Inputs
4.4 kOhm
Input Sensitivity Line Inputs
- 5 dBu
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Input Impedance Hi-Z Input Connectors
100 kOhm
Monitor Line Outputs
1
Connector Type Monitor Line Output
2 x RCA
Controls for Monitor Line Output
Monitor Volume
Max Output Level Line Output Monitor
28 dBu
Record Outputs
1
Connector Type Record Output
2 x RCA
Increased power main output (at 4 ohm)
70 W
DSP Digital Effect
DSP Number of Programs
16
DSP Controls
DFX Return, Mute switch
DSP Display Elements
Peak LED
Main Section
Main section controls
EQ Hi, EQ Low, EQ Mid, Master Volume, Phantom Power, voltage selector switch
Main section indicators
4-segment Level Meter, power LED
Phantom power
15 V
Mains connector
IEC socket
Operating voltage
transformer
Operating voltage
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
Power consumption
180 W
Cabinet
Cabinet construction
Bass Reflex
Cabinet material
MDF
Cabinet surface
texture paint
Cabinet colour
Black
Width
214 mm
Height
323 mm
Depth
221 mm
Weight
7 kg
Other features
2 x 16 mm pole mount socket, rubber feet
         

The first truly portable array, the compact CURV 500 is fully scalable with up to four interlocking aluminium unibody satellites operating on a SmartLink® plug and play adapter. Measuring 12 x 12 cm only, the array elements feature LD Systems' WaveAhead® technology with single 4" and triple 1" drivers each for high definition audio with powerful punch and superb balance.

 ldcurv500es_ldsystem_portable_system

The ported 10" subwoofer base includes the CURV 500's class D amplification with limiter, short circuit, thermal and overcurrent protection and a 4-channel mixer with 16 digital effect presets and Bluetooth® technology. It sports comprehensive connectivity on combo and speakON compatible connectors, 4 digital system presets, an M20 pole mount and 3 ergonomic handles for easy portability. Available in 3 sets for both live and installed sound applications LD Systems' lightweight CURV 500 provides extended vertical and horizontal coverage and impressive all-in-one convenience.

ldcurv500es_portable_system_ldsystem 

Delivering 460 watts RMS and a peak SPL of 128 dB the CURV 500 Entertainer Set includes 1 SmartLink® adapter plus a loudspeaker pole and cable.

With the CURV 500, LD Systems presents the first truly portable array, featuring the WaveAhead® technology for high definition audio with powerful punch and superb balance. Delivering extended vertical and horizontal coverage, the system is fully scalable with up to four interlocking unibody-array satellites connected to a subwoofer base, while the unique SmartLink® plug and play adapter provides multiple mounting options. For all-in-one convenience, a four channel mixer sporting a digital effects section and Bluetooth® wireless technology has  been integrated in the CURV 500 subwoofer.

 

• Type: Portable Array System Entertainer Set
• Including Distance Bar & Speaker Cable
• Portable Array System AV Set
• Including Speaker Cables
• Portable Array System Power Set
• Including Distance Bars & Speaker Cables
• Rated System Power (RMS): 460 W
• Number of Array Satellites: 4
• Number of Smartlink® Adapters: 1
• Number of Subwoofers: 1
• Max. SPL (continuous): 122 dB
• Max. SPL (peak): 128 dB
• Subwoofer: 10" bass reflex
• Satellite: MF: 1 x 4" / HF: 3 x 1" with WaveAhead® Technology / 16 ohms
• Frequency response: 47 Hz - 20 kHz
• Dispersion (H x V): 110° horizontal, 15° vertical per satellite
• Amplification: Class D
• Power Output (RMS/Peak): Subwoofer: 300 W / 1200 W
• Array Satellites: 2 x 160 W / 2 x 640 W
• Protection: DSP based multiband-limiter, Short Circuit, Overheating, Over-current
• Subwoofer Features: 4 channel mixer, Bluetooth®, 16 DFX Presets, 4 System DSP Presets, threaded M20 flange, 3 ergonomic handels
• Subwoofer Controls: Input Level (Ch1-4), Hi-Z, Hi/Low EQ (Ch1-2), DFX (Ch1-2), DFX Presets, DSP Presets, Blutetooth Link, Mono/Stereo, Sub Level, Main Level
• Subwoofer Indicators: Signal, Limit, Bluetooth®, Power
• Subwoofer Connectors: 1x Mic/Hi-Z (XLR/6,3mm Jack Combo), 1x Mic (XLR/6,3mm Jack Combo), 2x Line (XLR/6,3mm Jack Combo), 3,5mm Jack, 2 x Array Satellite Out (Speakon
compatible), Line Out (XLR), System Out (5-pin XLR)
• Subwoofer Material: Plywood
• Subwoofer Surface: PA Painting
• Array Satellite Features: WaveAhead® Technology, internal crossover, metal grille
• Array Satellite Material: Diecast Aluminium
• Array Satellite Surface: Powder coating
• Smartlink® Adapter Features: dual 16 mm flange, 2x M6 thread for optional wall mount
• Smartlink® Adapter Connectors: 1x Speakon compatible, 1x Phoenix
• Smartlink® Adapter Material: Diecast Aluminium
• Smartlink® Adapter Surface: Powder coating
• Subwoofer Dimensions (W x H x D): 325 x 383 x 491 mm
• Array Satellite Dimensions (W x H x D): 122 x 122 x 122 mm
• Smartlink® Adapter Dimensions (W x H x D): 122 x 57 x 122 mm
• Subwoofer Weight: 16,5 kg
• Array Satellite Weight: 1,7 kg
• Smartlink® Adapter Weight: 0,6 kg

YAMAHA Stagepas 600 BT Portable PA System 680-watt, portable PA system with 10-channel powered mixer, two 10" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ. 680-watt, portable PA system with 10-channel powered mixer, two 10" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ. Specifications:
  • 680W (340W + 340W) power output
  • High quality speakers (LF:10" woofer/ HF:1.4" voice coil compression driver)
  • Detachable 10-channel mixer (4 mono/line + 6 mono / 3 stereo line)
  • Bluetooth® audio streaming
  • 1-Knob Master EQ™ with virtual bass boost
  • High resolution SPX digital reverbs (4 types, parameter control)
  • Onboard feedback suppressor
  • Great-sounding 3-band channel EQ
  • Switchable stereo/ mono inputs
  • Hi-Z (high impedance) inputs
  • Phantom power
  • Monitor and Subwoofer outputs
  • Optional reverb footswitch
(Speakers): x 2
Τype: 2 passive speakers
Woofer: 10" (25 cm) cone
Cone: 1.4" (3.56 cm) voice coil compression driver
Enclosure: Two-way bass-relfex speakers
Frequency Range: 55 Hz - 20 kHz
Dimensions: Speaker 33,5 x 54,5 x 31,9 cm.
Weight: 2 x Speakers 10.9 kg
Type: Powered mixer
Power: 680W (340 W + 340 W) (Dynamic), 560W (280W + 280W) (Continuous)
Inputs/Outputs: 4 mono mic / line + 4 mono / 2 stereo line - Speakers Out(L, R), Monitor Out(L/MONO, R), Subwoofer Out (MONO) with auto HPF
Channels: Mixing channels 10
Equalizer: HIGH Shelving: 8 kHz/LOW Shelving: 100 Hz/MID peaking: 2.5 kHz
Effects: SPX digital reverb (4 program, parameter control)
Phantom Power: +30V (CH1, 2)
Dimensions: Mixer 34,8 x 19,7 x 13,5 cm.
Weight: 3.8 kg

Ultra-Compact 500-Watt 6-Channel Portable PA System with Bluetooth Wireless Technology, Wireless Microphone Option, KLARK TEKNIK Multi-FX Processor and FBQ Feedback Detection. Extremely powerful 8'' woofers and 1.35'' aluminum-diaphragm compression drivers. Connect your iPod, iPhone, iPad or any other MP3 player via Bluetooth. "Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included).

 

Brand BEHRINGER
Model PPA500BT
Part Number 000-B0N
Input Mic 2
Effect Yes
Channels 4
Console Type Portable PA Systems
Console Layout Horizontal
Power (4 ohms) per channel 160
Equalizer Yes
Application Portable PA
Series PPA series
Warranty 1 Year

 

Weight25.00 kg23.00 kg7.50 kg24.00 kg25.00 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 25.00 kg
Weight 23.00 kg
Weight 7.50 kg
Weight 24.00 kg
Weight 25.00 kg
Weight 15.00 kg