– Nearfield Monitor with 8″ Woofer – Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification – Bass extension to extend or curtail the low end frequency response – Two different tunings: one for free standing and one designed for speakers within 50 cm of wall – Sound balance to influence the overall […]
– Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification
– Bass extension to extend or curtail the low end frequency response
– Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
– Sound balance to influence the overall response of the speaker
The LYD series is a redefinition of our previous professional products, and LYD 8 is the biggest of them all. With its 8” MSP woofer and advanced DSP, the LYD 8 provides outstanding performance and a low-end precision you won’t believe. Perfect for smaller studios and home setups.
A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Frequency Response: 45 Hz – 21 kHz
Max SPL (1m, pair): 112 dB
Principle: Bass reflex
Crossover Frequencies: 3900 Hz
Tweeter: 28mm Soft dome
Woofer: 8”
Amplifier: HF 50W/LF 80W Class-D
I/O Connectors: XLR Balanced: RCA Unbalanced
Dimensions: 234 x 369 x 328 mm
Weight: 12,8 kg
Type:
Bass Reflex Active
Woofer:
8“
Tweeter:
28mm Soft dome
Amplifiers Power:
HF 50W/LF 80W Class-D
Input/Output Plugs:
XLR Balanced: RCA Unbalanced
Frequency Response:
45 Hz – 21 kHz
Dimensions (W x H x D):
234 x 369 x 328 mm
Weight:
12,8 kg
Weight
12.80 kg
Reviews
There are no reviews yet.
Be the first to review “DYNAUDIO LYD-8 Active Studio Monitor Speaker (Piece)” Cancel reply
- Nearfield Monitor with 8" Woofer
- Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification
- Bass extension to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
The LYD series is a redefinition of our previous professional products, and LYD 8 is the biggest of them all. With its 8'' MSP woofer and advanced DSP, the LYD 8 provides outstanding performance and a low-end precision you won't believe. Perfect for smaller studios and home setups.
A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Frequency Response: 45 Hz - 21 kHz
Max SPL (1m, pair): 112 dB
Principle: Bass reflex
Crossover Frequencies: 3900 Hz
Tweeter: 28mm Soft dome
Woofer: 8''
Amplifier: HF 50W/LF 80W Class-D
I/O Connectors: XLR Balanced: RCA Unbalanced
Dimensions: 234 x 369 x 328 mm
Weight: 12,8 kg
Type:
Bass Reflex Active
Woofer:
8“
Tweeter:
28mm Soft dome
Amplifiers Power:
HF 50W/LF 80W Class-D
Input/Output Plugs:
XLR Balanced: RCA Unbalanced
Frequency Response:
45 Hz - 21 kHz
Dimensions (W x H x D):
234 x 369 x 328 mm
Weight:
12,8 kg
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
PRICE PER UNIT
S1X
The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.
The smallest reference speaker
The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.
The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.
Woofer
Number
1
Basket Ø
6" (156 mm)
Voice coil Ø
1.5" (37 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
200 W / 280 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
±10 dB
High Shelf EQ > 6 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR
General data
Panel
Rear
Frequency response
40 Hz - 50 kHz
THD > 80 Hz
≤1.5 %
Long term output
≥103 dB
Max. peak
≥113 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
13.2 lb (6 kg)
Magnetically shielded
Optional
Height x Width x Depth
11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
Powered bass reflex speakers with 15 watts per side and flat frequency response
Active subwoofer with 50-watt amplifier for increased low end
Front-mounted controls convenient located on right speaker
Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer
Ultra-linear studio monitor with true active design
Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
High-precision crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions
Separately controlled limiter for low and high frequency overload protection
Magnetic shielding allows placement near computer monitors
“Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
115dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.