| Content | S350DB
Old School Style Modern Sound
- Titanium Dome Tweeters
- 8-Inch Booming Subwoofer
- Bluetooth 4.1 aptX Wireless Sound
Fully Featured Bookshelf Speakers.
Most 2.1 systems include tiny satellite speakers and make up for the small sound from satellites with their subwoofer. With the S350DB you get both a massive subwoofer and fully featured bookshelf speakers. Connect your sources via Bluetooth, RCA, optical, coaxial or AUX with these.
Side Panel Controls
Take full control of your audio with the side panel controls on the side of one of the bookshelf speakers. Three knobs are located on the side that effect the bass, treble and volume for the entire 2.1 system. Once switched on, the power light will appear on so you know your system is working.
8-Inch Subwoofer for Deep Lows
Receive deep satisfaction from the rumbling lows from the S350DB when the 8-inch subwoofer is activated during playback. Movies, music, and games come to life when you have this subwoofer attached and producing sound.
Side Panel Bass Reflex Port
This subwoofer has an enhanced side panel bass reflex port. This reflex port enhances your listening experience for all types of bass sounds. Enjoy deep rumbling lows from your favourite movies, music, games and so much more with this 2.1 system.
Titanium Dome Tweeters
The S350DB is equipped with two bookshelf satellite speakers that have titanium dome tweeters that aid in producing a sound that provides clear highs in any genre of music or videos and movies. The titanium dome tweeters are ¾-inch in size.
Wireless Remote Control
Switch between inputs and control playback with the wireless remote for the S350DB. Switch between optical, coaxial, auxiliary and Bluetooth inputs from a range. Also, control the volume or playback controls, as well as, switch the speakers on or off with the wireless remote.
Digital Signal Processing
The S350DB has a built-in amplifier that helps power and drive the speakers. As such, the S350DB uses digital signal processing. This helps the speakers provide a clear and standardised levels when processing digital signals.
Dynamic Range Control
The S350DB comes with a built-in amplifier that powers and amplifies both the bookshelf speakers and subwoofer. This system uses a dynamic range control for amplifying quiet sounds as well as reduce loud sounds that may cause clipping and unpleasant sounds.
- POWER OUTPUT:R/L(treble): 15W+15W
R/L(midrange and bass): 25W+25W
SW: 70W
- SIGNAL TO NOISE RATIO:R / L: ≥ 80dB (A) ; SW: ≥ 85dB
- FREQUENCY RESPONSE:R/L: 160Hz -20KHz ; SW: 40Hz –160Hz
- INPUT SENSITIVITY :PC : R/L: 600±50mV ; SW: 270±20mV
AUX: R/L: 400±50mV ;
SW: 200±20mV
Optical/Coaxial:R/L: 400±50mFFS ;
SW: 200±20mFFS Bluetooth: R/L: 400±50mFF;
SW: 200±20mFFS
- INPUT TYPEPC AUX Optical Coaxial Bluetooth
- DIMENSIONS :Subwoofer: 312*265*298mm
Satellite: 222H x 127W x 156Dmm( 8.75H x5W x 6Dinches)
- WEIGHT:19.1kg
|
Enjoy your audio from nearly any source with the satin black Audioengine A1-MR Wireless Speaker System. This system features Wi-Fi technology for wireless connectivity via AirPlay, DLNA, and UPnP, plus a 3.5mm input for traditional wired devices. The A1-MR has a 2-way design and outputs up to 15W RMS per channel. Each speaker sports a 2.75" aramid-fiber woofer and a 0.75" silk dome tweeter to produce clear, full-range audio.
The A1-MR is the perfect upgrade built to bring out the best in all of your home audio and deliver high-fidelity wireless music streaming anywhere you want to play. Together with the Audioengine companion app and your home network, the A1-MR creates a new way for you to discover and interact with the music you want to hear. Easily stream from any Wi-Fi-connected device on any streaming app, and experience fully immersive, true stereo sound in any room.
Purpose-built for versatility, the compact design of the A1-MR does little to prepare listeners for such expansive soundstage and crystal-clear imaging. A simple, modest design, the A1-MR takes up only inches of surface space, ensuring the only thing filling up your room is your next playlist.
Download the free Audioengine Control app and connect to your home Wi-Fi network using an iOS or Android phone or tablet. Then use the app to browse and instantly play high-quality music, podcasts, and more from the included music players, directly from your music library, or leave the app and play from any other player or streaming service via Airplay. Stream in-app music services, including Amazon Music, Spotify, TIDAL, Qobuz, iHeartRadio, TuneIn, Napster, and more using your iOS or Android phone.
Add additional A1-MR speakers or the B-Fi Wi-Fi streaming adapter to rooms around your home for multiroom sound, stereo pairing, and multi-user capabilities. Use the app to control your music from anywhere in your home. Seamlessly jump between stations, playlists, and services and play different songs in different rooms, or the same song in every room. All without missing a beat.
- ES9023 DAC
- Digital amplification for premium high-definition audio
- UPnP compatibility
- Arm AP8064 processor
| Overview:
Active USB bookshelf speaker Angled speaker positioning to optimize listening experience 2? inch (70mm) mid-range and treble units with dual magnetic circuit design Master volume with built-in power switch USB audio streaming capability and 3.5mm auxiliary input Wooden enclosure to minimize acoustic resonance
Features:
Total power output:RMS 2W ? 2 (THD+N=10%, f0=1 KHz)
Signal to noise ratio:?80 dBA
THD - Total Harmonic Distortion:? 0.5%
Frequency response:150Hz ~ 20 KHz (+/-5db)
Input sensitivity:USB: 650 mFS±50 mFS AUX: 500 mV±50 mV
Input Type:USB audio/AUX
Speaker unit: 2? inch (70mm) | The A5+ Powered Speakers are bookshelf speakers with sound that can fill any room. No network setup, passwords to enter, or buttons to push.
-
General Specifications
Type
Powered Bluetooth aptX HD speaker system
Amplifier Type
Class AB
Power Output
150 W peak power total (50 W RMS / 75 W peak per channel), AES
Drivers
5″ aramid fiber woofers
0.75″ silk dome tweeters
Inputs
3.5 mm stereo mini-jack, RCA L/R, Bluetooth
Outputs
RCA variable line-out
Input Voltages
115/240 V, 50/60 Hz manually switchable
SNR
>95 dB (typical A-weighted)
THD+N
<0.05% at all power settings Crosstalk
<50 dB Frequency Response
50 Hz-22 kHz ±1.5 dB
Input Impedence
10K ohms unbalanced
Protection
Output current limiting, thermal over-temperature, power on/off transient protection, replaceable external main fuse
Power Consumption
Idle: 10 W
Mute: 6 W
Sleep: 4 W
-
Bluetooth Specifications
Internal D/A Converter
AKM AK4396
Input Bit Depth
24 bit (padded)
Bluetooth Receiver Type
Bluetooth 5.0
Supported Codecs
aptX HD, aptX, AAC, SBC
Wireless Operation Range
Up to 100 ft (30 m) typical
Input Data Rate
Determined by Bluetooth
Wireless Latency
~30 milliseconds (ms)
-
Weights And Measures
Dimensions (HWD)
Left (active) – 10.75″ (27 cm) x 7″ (18 cm) x 9″ (23 cm)
Right (passive) – 10.75″ (27 cm) x 7″ (18 cm) x 7.75″ (20 cm)
Weight
Left (active) – 15.4 lb (7 kg)
Right (passive) – 9.6 lb (4.4 kg)
Total Shipping Weight
31 lb (14 kg)
Shipping Box Dimensions (LWH)
22″ (56 cm) x 11.5″ (29 cm) x 15″ (38 cm)
| Overview:
Edifier enters the world of USB powered speakers with the R12U edition, the ideal companion speaker to PCs and notebooks. Designed to fit small spaces in a compact 2.0 system, R12U comes with the convenience of great audio performance at affordable price. What’s more? It also features a 3.5mm auxiliary input to connect with portables and MP3 players.
Features:
Total power output : RMS 2W ? 2 (THD+N=10%, f0=1 KHz)
Signal to noise ratio : ?85 dBATHD (Total harmonic distortion) : ? 0.5%
Frequency response : 30Hz ~ 20 KHz (+/-5db)
Input sensitivity : 700 mV±50 mV
Input type : AUX
Speaker driver : 2 1/4 inch (60mm) |
PRODUCT DESCRIPTIONAudioengine HD3 Self-Amplifying Bookshelf Speakers 2.75 ”15W RMS Walnut (Pair) artsound hxeio wireless2
The HD3 High Power Speakers are a mini home music system with high fidelity stereo sound for smaller spaces and desktops. Wired or wireless connections, including USB audio from your PC, wireless aptX-HD Bluetooth long-range from your phone, or the good old-fashioned 80's analog vintage turntable or cassette player.
HD3 wireless speakers work with all your applications, music and devices. Tidal, Spotify, Pandora… all your favorite streaming apps play right away.
AptX-HD long range wireless Bluetooth
High quality sound wrapped in handmade wooden cabinets
Simple setup, no receiver required
There are no push buttons and inputs that are always ready
Front panel volume control and headphone jack
HD3 cordless speakers are small speakers with surprisingly loud sound for their size.
No network setup, login passwords, or forward buttons Setting up these speakers is simple and easy.
The HD3 wireless speakers are made with custom Audioengine accessories: aramid fiber woofer, silk tweeters, aptX HD Bluetooth and built-in power amplifiers wrapped in handmade precision cabinets.
Clear, complete and powerful sound that fills almost any space.
Built-in analog power amplifiers sound incredible compared to lower cost digital amplifiers.
A completely new audio experience guaranteed. |
Reviews
There are no reviews yet.