Content | It takes Debut 2.0 to the limit.
The pinnacle of ELAC’s Debut 2.0 Series is the F6.2, a floorstander with credentials to play in the big leagues. Whether your aim is to build a formidable two-channel or surround-sound system for music and home theater, there isn’t a more capable performer for anywhere near the price. It’s a "no-excuses” speaker guaranteed to change your definition of value in high-end audio.
SPECIFICATIONS
Enclosure Type : 3- Way Bass Reflex
Frequency Response: 39Hz – 35000Hz
Nominal Impedance: 6 Ohms
Sensitivity: 87db @2.83v/1m
Crossover Frequency: 90Hz/2200Hz
Max Power Input: 140 Watts
Tweeter: 1″ Cloth Dome
Woofer: Triple 6-1/2″ Aramid Fiber
Cabinet: CARB2 Rated MDF
Cabinet Finish: Black Ash Vinyl
Port: Dual Flared
Binding Posts: 5 – Way Metal
Dimensions (WxHxD) : 7.69″ x 43.18″ x 10.55″
Everything we do is different
Few speakers have garnered such critical acclaim as the original Debut Series by ELAC. They established a new value proposition, with build quality and performance never before attainable at such an affordable price. Debut "changed the game,” and now it’s changed again with the Debut 2.0 Series—proof that ELAC can’t leave well enough alone. Redesigned from the ground up, they sound even more remarkable than the speakers that sparked the revolution in high-end sound.
New Tweeter with Wide-Dispersion Waveguide
A new silk-dome tweeter features a wide-roll surround and takes response up to 35,000 Hz for even more lifelike high frequencies. The waveguide improves directivity control and eliminates the diffraction modes inherent in traditional box enclosures.
New Woven Aramid-Fiber Woofer
The revised shape of the aramid cone offers even greater stiffness and damping, far superior to polypropylene or paper. The added strength allows more flexibility in design to achieve a smoother, extended low-frequency response. |
Room-filling sound without a room-filling speaker cabinet. Slimmer than ever before, the 684 S2 offers an amazing combination of floorstander power, audio performance and unbeatable value.
Switching to 5-inch bass/midrange drivers from the previous 6.5-inch cones, means the 684 S2 is now significantly slimmer than its predecessor, with simultaneously improved audio performance, thanks to Bowers & Wilkins innovation. The two Kevlar cone drivers benefit from smaller voice coils to increase sensitivity.
The 5-inch drivers now also feature Anti-Resonance Plug dustcaps, technology taken from our high-end PM1 speakers, that improve pistonic movement inside the voice coil. This helps to deliver amazingly distortion-free midrange performance, all in a smaller space.
As well as slimmer, improved driver performance, the 684 S2 also features a Decoupled Double Dome tweeter. Double dome technology, brought across from the CM10, increases tweeter rigidity for a more precise sound, while the tweeter sits in a gel-filled cavity, decoupled from the surrounding cabinet - which removes resonances and vibrations, for a more natural, spacious sound.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone bass/midrange drivers
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
2x ø130mm (5 in) woven Kevlar® cone bass/
midrange | Frequency range | -6dB at 45Hz and 50kHz | Frequency response | 72Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | 87dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
If itʼs hard to put the sound of the CM9 into words, thatʼs just as well. This top-of-the-range floorstanding speaker will fill even the largest domestic spaces with music so richly detailed, and so startlingly lifelike, that it will leave you speechless.
The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9ʼs Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.
The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.
All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.
Technical features
Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone FST midrange
Flowport™
Description 3-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FST midrange
2x ø165mm (6.5 in) paper/Kevlar® cone bass
Frequency range -6dB at 30Hz and 50kHz
Frequency response 56Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 89dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
| System Format: 3 Way
Frequency Response: 30 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 116.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 790 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
1060 x 210 x 330 mm
(41 3/4 x 8 1/4 x 13 inch)
Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) |
Frequency Response: 48 Hz - 35 KHz Sensitivity (1W@1m): 90 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS): 100 W System Power Handling (RMS): 150 W Recommended Amplifier Requirements: 20 - 150 W Maximum SPL (dBA): 108 Bass Alignment: Front and rear ported Drive Unit Complement: 2 x 100mm (4“) MMP®II cone bass/mid driver. 1 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 1000 x 125 x 140 mm (39 3/8 x 4 15/16 x 5 1/2) (Without spikes) Weight (each): Kg (lbs) 10.2 (22 1/2) User's Manual
|
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
Reviews
There are no reviews yet.