Content | Axial Sensitivity 94 dB
Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 82 Hz - 18 k Hz
Frequency Response (-10 dB) 55 Hz - 20 k Hz
Recommended High-Pass Frequency 45 Hz
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-12K, 305mm (12”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 2.1 k Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 7 Ω
Connector Type Dual NL4
Grill 18GA Steel with Black Powdercoat
Height 607 mm (23.9“)
Width 362 mm (14.25“)
Depth 340 mm (13.39“)
Weight Net 15.8 kg (34.83 lbs)
Shipping Weight 20 kg (44.09 lbs) |
Chassis Size 304.8 mm (12“) Color Black Color Unfinished Color White Directivity Index 10.9 dB Input Connections 2 four-pin Speakon Speaker Type Fullrange Frequency Response (-3 dB) 58 - 17000 Hz Frequency Response (-10 dB) 50 - 19000 Hz Internal Crossover No Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 130 dB Coverage (Nominal -6 dB) H° 80 ° Coverage (Nominal -6 dB) V° 55 ° Rotatable Horn No LF Transducer DL12ST Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 8.5/13.4 Ω Flying Yes Outdoor No Height 584 mm (22.99“) Width 379 mm (14.92“) Depth 358 mm (14.09“) Weight Net 28.8 kg (63.49 lbs) |
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1
|
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam
|
12-inch Two-Way Passive 90 x 50, 600W Loudspeaker System
- DVX3121 12 LF Transducer with Forced Air Cooling ND2 2 Voice Coil, 1 Exit Neodymium Compression Driver 90 x 50 Coverage Pattern 600W Continuous (2400W Peak) Power Handling High Sensitivity, 131 dB Maximum SPL Adjustable Monitor Angle (45 or 55) 2 Anchor Plates for Single Stud Fittings and 7 Integral Suspension Points Available in Black or White Passive/Biamp Selectable Full Line of AccessoriesThe Electro-Voice Zx3 is the new standard of no compromise audioperformance and versatility in a simple to use, compact package.At its heart are the transducers. First is the DVX3121 high performancelow frequency transducer. EV used advanced computer aided designtechniques to create forced air, directional voice coil cooling for highpower and efficiency. Finite element analysis was used to optimize thesuspension and magnetic structure for long, linear travel to provide lowdistortion and greater LF extension. These features and details, suchas forged magnetic components and special materials, provide reliabilitywith a 500W power rating in a lightweight transducer. Next is theND2, a 2-inch voice coil compression driver based on neodymium motorstructure to allow for maximum output while reducing size and weight toa minimum. Its precision phasing plug and titanium diaphragm providebetter HF performance, while the integral heatsink provides cooling forhigh power output.The high tech enclosure uses injection-molded high-impact polypropylenestructural foam to make the Zx3 incredibly durable. The enclosuregeometry elements have been carefully designed to provide maximumrigidity and bass response. By design the Zx3 is also a perfect solutionfor stage monitors by allowing two angles (45 or 55) without any additionalaccessories.Two coverage patterns are available; 60 x 60 coverage for long-throwand cluster applications, 90 x 50 coverage for wider coverage or shorterdistances.The Zx3 is equipped with two anchor plates for rigging with single studfittings,along with two more possible anchor plate attachment points onthe bottom. For permanent suspension or attaching brackets, the Zx3also has two M8 inserts on the top and bottom, two under the handle,and one on the back of the enclosure, for a total of 7. All versions areavailable in black or white.
- Freq. Response1 (-3 dB): 58 Hz - 15 kHz
- Freq. Range1 (-10 dB): 48 Hz - 20 kHz
- Rec. Hipass Frequency: 50 Hz
- Axial Sensitivity1: 97 dB (1W/1m)
- Max. Calculated SPL: 131 dB
- Horizontal Coverage: 90
- Vertical Coverage: 50
- Power Handling (Passive): 600W Continuous, 2400W Peak
- LF Power Handling (Biamp): 500W Continuous, 2000W Peak
- HF Power Handling (Biamp): 40W Continuous, 160W Peak
- LF Transducer: DVX3121, 12 in (305mm) Driver
- HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
- Compression Driver
- Crossover Frequency: 2 kHz
- Nominal Impedance: 8 Ohms
- Minimum Impedance: 6.2 Ohms
- Connectors: (2) Neutrik Speakon NL4s
- Enclosure Material: Polypropylene Structural Foam
- Suspension: Enclosure has locations for 4 Single-Stud
- Attachment Plates and 10 Forged Steel
- Eyebolts - 2 on Top, 2 on Bottom, 2 on
- Side, and 1 on Rear of Enclosure
- Grille: Polyester Powder Coated, 16GA
- Galvanized Steel, with Rotatable Logo
- Dimensions (H x W x D): 613mm x 397mm x 362mm: (24.14 x 15.64 x 14.26)
- Net Weight: 19.8 kg (43.7 lbs)
- Shipping Weight: 22.1 kg (48.6 lbs)
|
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
Reviews
There are no reviews yet.