| Content |
Chassis Size 304.8 mm (12“)
Color Black
Directivity Index 11.6 dB
Input Connections 2 four-pin Speakon
Speaker Type Two-Way
Speaker Type Wedges
Frequency Response (-3 dB) 65 - 16000 Hz
Frequency Response (-10 dB) 50 - 20000 Hz
Internal Crossover No
Sensitivity 1 W/1 m 98 dB
Max. SPL/1m (calc) 129 dB
Coverage
(Nominal -6 dB) H° 55 °
Coverage
(Nominal -6 dB) V° 80 °
Rotatable Horn No
LF Transducer DL12ST
Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts
High Frequency Power Handling (Continuous/Program/Peak) 75 Watts
LF Nominal Impedance 8 Ω
HF Transducer ND6-16
HF Nominal Impedance 16 Ω
Minimum Impedance 8.2/10.5 Ω
Enclosure Material 13-ply birch plywood with Futura
Flying No
Outdoor No
Height 584 mm (22.99“)
Width 449 mm (17.68“)
Depth 313 mm (12.32“)
Weight Net 21.9 kg (48.28 lbs) |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 12" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
68 - 18000 HZ
Frequency response (-10 dB)
55 - 20000 Hz
Crossover frequency
1400 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
12 "
Woofer dimensions (mm)
304.8 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Descriptions:
The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.
Applications:
Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
FEATURES:
Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction
Weight: 35
|
The CS3.1 Cuban Speaker features a 3 1/8" full range loudspeaker with a shielded neodymium magnet. The CS3.2 Cuban Speaker features a 1" soft dome tweeter and a 3 1/8" full range loudspeaker with a shielded neodymium magnet. They are capable of producing up to 20 W RMS, with a maximum of 40 W. The standard speaker impedance is 8 Ohm, but through an additional 100 V Line transformer, it also can be used on 100 V PA systems.
- Model Name / Type: AUCS3.2 / cuban speaker
- Max . Power: 40 W
- RMS Power: 20 W
- Sensitivity (1 W / 1 m): 86 dB
- Max. SPL: 102 dB
- Impedance: 8 ohms
- Frequency Response (±3 dB): 180 Hz - 20 kHz
- Dimensions (W x H x D): 192 x 122 x 106 mm
|
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
|
Frequency Range
|
:
|
60 Hz - 20 kHz
| |
Frequency Response
|
:
|
70 Hz - 20 kHz
| |
Coverage Pattern
|
:
|
50 x 90 nominal
| |
Crossover Modes
|
:
|
Passive / Bi-amp
| |
Crossover Frequency
|
:
|
1.1 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
| |
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
| |
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
| |
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
| |
Nominal Impedance
|
:
|
8 ohms
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
| |
Finish
|
:
|
Black DuraFlex finish
| |
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
| |
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
| |
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
| |
Net Weight
|
:
|
21 kg (46.0 lb)
|
| MQ 50i is a 2 way compact loudspeaker for indoor wall flush-mounting installation.
Its "bass-reflex” (/ vented) cabinet includes a 5” woofer and a waveguideloaded dome tweeter (to ensure a sound correct dispersion over a wide coverage angle).
It includes a transformer inside for the connection to (100 – 70 V) constant voltage lines, yet it can also be set to 16 Ω (low impedance connection).
The power / mode selection is made by means of the front panel rotary switch.
| Acoustical Specifications |
| Type Of Speaker: |
2 way in wall bass reflex |
|
| Frequency Response: |
180 Hz |
÷ 20 kHz |
| Max SPL @ 1m: |
112 dB |
|
| Horizontal coverage angle: |
120° |
|
| Vertical coverage angle: |
100° |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
90 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
3000 Hz |
|
| TRANSDUCERS |
| Speaker: |
5“ |
|
| Tweeter: |
0.75“ |
|
| INPUT SECTION |
| Input connector: |
2 euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
30 - 20 - 10 - 5 W (100 V) |
|
| CABINET |
| Hardware: |
Body in self-extinguishing plastic |
|
| Colour: |
White / Silver |
|
| Grille: |
Steel |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
270 / 10.62 |
|
| Width: |
195 / 7.67 |
|
| Depth: |
88 / 3.46 |
|
| Net Weight: |
2.21 / 4.87 |
|
| SHIPPING INFORMATION |
| Package height: |
300 / 11.81 |
|
| Package width: |
220 / 8.66 |
|
| Package depth: |
165 / 6.49 |
|
| Shipping Weight: |
2.84 / 6.26 |
|
Reviews
There are no reviews yet.