Content | The party smoke-machine
* Ideal for party-rooms or small discotheques
* Powerful output
* With ON/OFF remote control
* Remote-control connection via 3-pin IEC-socket
* With mounting-bracket
* Quality thermostat
* Overheat protective switch
SPECIFICATIONS:
Power supply: 230 V AC, 50 Hz ~
Power consumption: 700 W
Smoke-output: approx. 2.5 m
Warm-up time: approx. 5 min.
Fluid consumption: approx. 90 ml/min.
Output volume: approx. 90 m?/min.
Tank capacity: 1 l
Dimensions (LxWxH): 325 x 235 x 230 mm
Weight: 3.5 kg |
MDG MAX 3000 APS Smoke Machine 715W
Extremely powerful,adjustable fog output Virtually noiseless, with the finest fog and the longest hanging times Automatic Purging System (APS) to prevent build-up and clogging Compatible with remote control timer and DMX interface Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute) Portability option
TECHNICAL DATA MAX 3000APS Maximum fog output 85 m3 (3,000 ft3) per minute Fluid consumption 1 L (34 oz) per hour at 2.76 bar (40 psi) Gas type CO2 or N2 Gas consumption 0.97 kg (2.13 lb) per hour at 2.76 bar (40 psi) Reservoir capacity 2.5 L (0.66 US gallon) Automatic Purging Standard feature System (APS) Fog colour Pure white Particle size 0.5-0.7 microns Warm-up time (maximum) 8 minutes Fluid type MDG Neutral Fluid (M.S.D.S. available on request) Operating voltage 115 or 230 VAC, 50/60 Hz Power consumption 715 W Dimensions Length 61 cm (24?) Width 18 cm (7?) Height 30 cm (12?) Weight 20 kg (43 lb) Shipping weight 33 kg (72 lb) (with flight case) Approval CE approved, CSA and UL pending |
DMX ADAPTOR FOR FOG MACHINES
|
Ground Fog Machine
- For producing creeping mist (low-lying fog) similar to dry ice effect
- For use with normal ice cubes or ice packs
- Eliminates the need for mist coolers, air conditioning systems or dry ice machines
- With practical timing control
- Creates professional theatre effects
- Approx. 2 kg of ice per charge will last approx. 2 hours
- Water drainage valve system: Water drains directly into the drainage bag and can easily be emptied by means of a valve placed backwards
- Heater: 700 W
- Fluid container: 1/2 litre (enough for about 2 hours of fogging)
- Dimensions: 490 x 315 x 260 mm
- Weight: 8 kg
|
Digital technology and a new Design
The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.
Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.
Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany
Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
110 V / 60 Hz
Warm up time approx. 7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
. 35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at
Control: DMX 512
0 ? 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg
|
JEM Magnum Pro 2000 Foger. Special long lasting and reliable heating unit. Variable fog output incl. timer. 1650W, 0.2l/min. Fluid at max power. aprox.13Kg with out fluid, Dimensions of Machine: 695mm x 356mm x 325mm
Specifications :
-
700 m³/min fog output
-
1600 W heat exchanger
-
8 min heat-up time
-
Continuous output
-
Optional DMX
-
Floor standing or truss mounting
-
9.5 liter fluid capacity
-
Different fluid options for different applications
-
DMX with optional DMX interface module
-
On-board control panel
-
Removable panel for remote control
-
Timer and output level remote control
|
Reviews
There are no reviews yet.