| Content |
Nominal Specifications - Nominal Diameter 3“, 80 mm
- Overall Diameter 3.1“, 81 mm
- Bolt Circle Diameter 3.62“, 92 mm
- Baffle Cutout Diameter 2.9“, 73.6 mm
- Depth 1.55“, 46 mm
- Flange and Gasket Thickness 0.26“, 6.5 mm
Electrical Specifications - Minimum Impedance 6.2 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 20 W
- Maximum Power Handling**** 40 W
- Sensitivity (1W/1m) 91 dB
- Frequency Range 100 - 20,000 Hz
- Voice Coil Diameter 0.75“, 19 mm
- Winding Material Aluminium
- Former Material Kapton
- Winding Depth 0.26“, 5 mm
- Magnetic Gap Depth 0.2“, 4 mm
- Flux Density 1.5 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 110 Hz
- DC Resistance (Re) 6.2Ohm
- BL Product (BL) 4.5N/A
- Diaphragm Mass inc. Airload (Mms) 2.4 grams
- Mechanical Compliance of Suspension (Cms) 0.7 mm/N
- Rms 0.35 Kg/s
- Electromagnetic Q (Qes) 0.5
- Mechanical Q (Qms) 5
- Total Q (Qts) 0.45
- Compliance Equivalent Volume (Vas) 0.03 ft³, 0.95 dm³
- Surface Area of Cone (Sd) 4.5“², 29.4 cm²
- Maximum Linear Excursion (Xmax)* 1.8 mm
- Xdamage** 7.3 mm
- Coil Inductance (Le) 0.15 mH
- Diaphragm mass (Mmd) 2.3 g
- Eta Zero 0.28 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
Faital Pro 5 FE 100 A
5" Speaker 80 W 8 Ohms
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
5 "
Nominal Diameter
130 mm
Voice Coil
1.26 "
Voice Coil
32 mm
Overall diameter
124.5 mm
Pitch Circle Diameter
133 mm
Cut- out Measurement
114 mm
Mounting holes
4
Diameter of fixing holes
6 mm
Depth
65 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
80 W
maximum rated load
160 W
Sensitivity (1 W / 1 m)
88 dB
Frequency response
65 - 6300 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
65 Hz
Re (DC resistance)
5.4 Ohm(s)
Qms (mechanical quality)
8.18
Le (inductance of the voice coil)
0.53 mH
Qes (electrical quality)
0.47
Qts (overall quality)
0.44
Vas (equivalent volume)
5.16
Mms (moving mass)
10.5 g
BL (power factor)
6.9 T/m
Xmax (maximum displacement)
5.25 mm
Cms (elasticity of the suspension)
0.55 mm/N
Sd (membrane area)
79.8 cm²
Rms (mechanical loss resistance)
0.57 kg/s
Weight
1,12 kg
| ELECTRO VOICE genuine replacement woofer for EVID 4.2
- Genuine Electro Voice 4" Woofer
- 16 Ohm
- F.01U.150.288
|
JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.
This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.
|
JBL Replacement Woofer for Control 23 Loudspeaker 124-03000-00
Replacement woofer for JBL\'s Control 23 Loudspeaker.
Voice coil:23mm (7/8“)
Nominal driver diameter: 86mm (3 3/8“)
Impedance: 8 ohms
DC Resistance: 6.5 ohms (nominal)
Polypropylene cone with rubber edge
| |
Reviews
There are no reviews yet.