| Content |
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
Super DAC is a USB digital to analog converter with stereo RCA analog outputs and both coaxial and optical digital outputs. With audiophile-grade Wolfson DAC/ADCs, the M-Audio Super DAC performs 24-bit/192kHz high-definition audio conversion over a USB 2.0 connection. This results in the highest possible audio quality, which is critical for users who want to connect their audio equipment to their computer but are not satisfied with the sound quality of the typical computer sound card or the compression limitations of a Bluetooth connection. Six sampling rates between 44.1 and 192kHz are user selectable so you can achieve the exact performance level needed for any given circumstance.
Super DAC has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. It also features analog stereo RCA line outs and coaxial and optical digital output connections, so you can easily connect a wide array of external equipment. Since virtually all high-quality audio equipment has a digital input, Super DACʼs optical and coaxial digital outputs are perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.
Super DAC is USB-bus-powered or can use an optional AC wall adapter (not included). The M-Audio Super DAC is the answer when you require reference-quality sound from your computer.
Features - 24-bit/192kHz high-definition audio conversion over a USB 2.0 connection
- High-quality headphone amplifier with 1/4" and 1/8" outputs
- Stereo analog line in
- Stereo analog RCA line outputs
- Coaxial and optical digital outputs
- Wolfson digital conversion
- USB-bus-powered
Requirements - Windows XP - Windows 10 Compatible
- OSx 10.7.5 - 10.11 Compatible
|
The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied. | ”It makes a handsome difference to your on-the-go sound.” ’What Hi-Fi?’ 2019 award-winner.
Improve the sound of your smartphone
The Cyrus soundKey uses a top quality DAC (Digital to Analogue Convertor) built into an ultra-low power circuit that lets you hugely improve the sound of your smartphone or tablet without rapidly draining the battery. Using a much better DAC than the one built into most smartphones and tablets means music sounds more dynamic, detailed and true-to-life.
Compatible with Hi-Res music files
A further bonus with the soundKey is that it’s compatible with Hi-Res music files up to 24 bit/96kHz. This means that, as well as MP3 and AAC files, it will also replay your Hi-Res FLAC files. Hi-Res makes the music sound more natural, with subtle detail easier to detect.
Ultra-low power consumption
A key advantage with this DAC over others is the extremely low power consumption. With a battery drain of less than 50 milliamps – under half the maximum recommended by Apple for use with their iOS devices – the soundKey is kind to your phone’s battery. What this means is a much longer phone battery life than when using other mini-DACs. The device itself is also battery-free.
Works with Windows 10, Android 5+ and iOS9+
Compatible with Windows, Android and Apple devices the soundKey is suitable for just about any smartphone. Simply make sure you have the correct USB OTG (On The Go) connection (Apple Camera Kit connection for Apple iOS devices) and you’re good to go.
Compact, robust and light
Crafted using high quality brushed aluminium, the soundKey is both lightweight and strong. Its sleek design combined with its compact dimensions and mere 18g weight make it perfect for music on the move.
Unlock the key to great sound from your smartphone, with the Cyrus soundKey.
Brand Cyrus
Colour Graphite
USB Yes
Weight (KG) 18.1g
Bluetooth No
Dimensions WxDxH (mm) 23 x 8 x 54
High Resolution Audio Yes
Power Consumption- Normal Use Under 50mA
Optical Digital Inputs No
DAC Texas Instruments PCM5102 |
The Rosetta 200, Apogees successor to the PSX-100 and Rosetta AD namesake,
delivers the quality of the popular Rosetta 800, in a 2-channel AD/DA solution. Like
the Rosetta 800, the 200 features premium Apogee A/D and D/A conversion, 192k
sampling rates (standard), optional Pro Tools HD, Mix and FireWire expansion cards
and core Apogee technologies such as UV22HR, and SoftLimit. And while the
Rosetta 200 shares much of its feature set with its cousin, it throws in some irresistible
extras such as the new, CODA, Audio Finishing Module, full channel metering, and
MIDI and S/PDIF input and output. Flexibility and features galore make the Rosetta 200
an outstanding option for professional and project studios, mastering engineers, and
audio archivists.
Features:
Channels of premium 24-bit AD/DA conversion
Sample rates up to 192kHz with Apogee's "Intelliclock"
2 channels of AES, S/PDIF (coax & optical), and ADAT/SMUX I/O MIDI I/O
Optional FireWire expansion card for compatibility with OS X, and
Windows XP (X-FireWire card)
Optional expansion card for direct connection to Pro Tools HD & Mix systems
(X-HD card, X-Digi-Mix card)
“Soft Limit" for maximum digital level without overs
CODA: The Aptomizer Level Normalizer, Sample Rate Conversion (SRC), and
Apogees UV22HR for superior dither to 16-bit
Full channel metering
| ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE
This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan.
HDMI Male to VGA Female Video Converter Adapter Cable for PC Laptop HDTV Projectors and other HDMI Input Devices:
- Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
- Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
- With this version, we added a standby function to lower the energy consumption
- On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
- Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
- More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal
|
Reviews
There are no reviews yet.