Content | The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
900 mm
Max height
1500 mm
Height adjustment
Clamp with safety pin
Base type
3-point
Base material
Cast iron
Base edge length
292.5 mm
Lower connector
M20
Tubing diameter
42 mm / 35 mm
Max. load
50 kg
Interchangeable rings
1 x 25 mm , 1 x 30 mm
Weight
6,5 kg
Additional information
Including acoustic isolation spikes |
Universal Horn Clamp for SM98 Microphone | Adjustable heavy-duty studio monitor stand set suitable for studio monitor speakers up to 8 inch. The stands are adjustable between 34cm and 49cm in height. Comes supplied including 8 anti-vibrating caps and a foam anti-slip topping to stick on the top if required.
- Universal fit for all Studio monitors up to 8“
- Quick and easy to setup and adjust
- Metal upright sections with black finish
- Adjustable height: 340 - 495mm
- Supplied with allen key, anti-slip topping and feet
- Maximum load 20kg per stand
Height |
340mm |
Max. load |
20kg |
Max. height |
495mm |
Tube |
Top 35mm / Bottom 40mm |
Dimensions: Folded |
220 x 230mm (Topplate) |
Dimensions |
240 x 240mm (Bottomplate) |
Weight |
5kg |
| Xαρακτηριστικά :
Eιδικά κατασκευασμένες βάσεις δαπέδου για τα ηχεία Wharfedale Linton
Kομψός σχεδιασμός
Προσφέρει εξαιρετικό damping
Tοποθετεί τον άξονα ακρόασης του ηχειου , στο βέλτιστο σημείο
Διαστάσεις (YxΠxB): 43,68 x 29.97 x 33.02 cm. |
- Height Adjustable Near-Field Monitor Stand
Speaker plate dimensions: 9” square - 23 cm square
Height Positions (5): 30.7”, 34”, 37.4”, 40.7”, 44” - 78, 86.5, 95, 103.5, 112 cm
Base Size: 14.5” x 16.1” - 37 x 41 cm
Weight capacity: 125 lb - 57 kg
Weight: 11.1 lb - 5 kg
|
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
|
Reviews
There are no reviews yet.