The Vista M1 is an ultra-compact and extremely cost-effective playback-only Vista control surface. The M1 is ideal for situations where you can do your programming in advance on your PC, but you still want hardware to control the playback of your show. Designed to be used with a laptop, the M1 gives you all the […]
The Vista M1 is an ultra-compact and extremely cost-effective playback-only Vista control surface. The M1 is ideal for situations where you can do your programming in advance on your PC, but you still want hardware to control the playback of your show.
Designed to be used with a laptop, the M1 gives you all the playback benefits of a Vista show in a compact and portable package thatʼs perfect for trade show booths, hotels, clubs or any venue where space is tight.
With five playbacks including faders and flash buttons, plus a rotary master fader, the M1 is a complete and portable Vista playback module. When you want to travel light but you donʼt want to compromise your show, the M1 is the ideal live playback solution.
Main Controls
Blue, Green, Yellow, Red modifier buttons
Grand Master (rotary) fader and DBO button
Playback Controls
5 Playbacks with faders and flash buttons
Playbacks feature; Select and Go buttons
Split mode allows control of up to 15 Cuelists
Playbacks can be configured for control of Groups, Presets and more
Page Up / Down buttons
DMX Output
DMX output channels determined by dongle – sold seperately
128, 256, 512, 1024, 2048 or unlimited channel versions available
Specify requirements at time of purchase
Upgrades available
Input and Output Connections
2 DMX outputs (* Actual DMX output channels determined by dongle. Software pack, including dongle, must be purchased separately.)
1 USB2 connector – B type
Specifications
Processor : 48MHz Atmel ARM7
SRAM : 256 Kbytes
Dimensions (l w h) : 250mm x 284mm x 59mm
Weight: 2kg Net 2.8kg Shipping
System Requirements
Windows 7, Vista or XP Professional with Service Pack 3, either 32 or 64bit edition.
Mac OSX 10.6 Snow Leopard or 10.7 Lion *Hardware must support the 64-bit kernel
Intel® processor i3 (i5 or better recommended)
2GB of RAM (4GB recommended)
4GB of available hard disk space
A Vista dongle required to enable output.
Weight
2.80 kg
Reviews
There are no reviews yet.
Be the first to review “JANDS VISTA M1 CONTROL SURFACE LIGHTNING DESK” Cancel reply
The Vista M1 is an ultra-compact and extremely cost-effective playback-only Vista control surface. The M1 is ideal for situations where you can do your programming in advance on your PC, but you still want hardware to control the playback of your show.
Designed to be used with a laptop, the M1 gives you all the playback benefits of a Vista show in a compact and portable package thatʼs perfect for trade show booths, hotels, clubs or any venue where space is tight.
With five playbacks including faders and flash buttons, plus a rotary master fader, the M1 is a complete and portable Vista playback module. When you want to travel light but you donʼt want to compromise your show, the M1 is the ideal live playback solution.
Main Controls
Blue, Green, Yellow, Red modifier buttons
Grand Master (rotary) fader and DBO button
Playback Controls
5 Playbacks with faders and flash buttons
Playbacks feature; Select and Go buttons
Split mode allows control of up to 15 Cuelists
Playbacks can be configured for control of Groups, Presets and more
Page Up / Down buttons
DMX Output
DMX output channels determined by dongle – sold seperately
128, 256, 512, 1024, 2048 or unlimited channel versions available
Specify requirements at time of purchase
Upgrades available
Input and Output Connections
2 DMX outputs (* Actual DMX output channels determined by dongle. Software pack, including dongle, must be purchased separately.)
1 USB2 connector – B type
Specifications
Processor : 48MHz Atmel ARM7
SRAM : 256 Kbytes
Dimensions (l w h) : 250mm x 284mm x 59mm
Weight: 2kg Net 2.8kg Shipping
System Requirements
Windows 7, Vista or XP Professional with Service Pack 3, either 32 or 64bit edition.
Mac OSX 10.6 Snow Leopard or 10.7 Lion *Hardware must support the 64-bit kernel
Intel® processor i3 (i5 or better recommended)
2GB of RAM (4GB recommended)
4GB of available hard disk space
A Vista dongle required to enable output.
The Touch! wireless RGB LED Controller is our most advanced and easiest to use RGB LED controller. With this controller, you can use the touch wireless remote to control your RGB LED fixtures, providing full color and brightness control. Simply connect this unit to your RGB LED fixtures and a power supply, grab the remote control, and start controlling your fixture.
Choose any color output using the touchwheel on the remote control, or choose from 11 pre-programmed scenes.
The RGB Touch Controller is a colour-change control system for LED lighting.
It features the latest in capacitance and wireless touch technology, to ensure an increased lifespan and reliability by eliminating the mechanical wear associated with physical buttons.
The wireless range of the kit is approx 20m and incorporates a new PWM control technology to eliminate the flicker between colour changes.
Many features come as standard including multi-type memory functions for colour, modes, speed and brightness/dimming.
The kit comes boxed and complete with user manual, simple-to-install input/output receiver and capacitive-touch, colour wheel handheld controller.
Technical parameters:
Controller：
Working temperature：-30℃~+60℃
Supply Voltage：DC5V/DC 12V-24V,
Output：3 channels N-MOS Drain open output
Connection mode：common anode
Static power consumption：<0.5W
Output current： 6A*3Ch=18A 6A(Each channel)
controller dimension：：L83 Χ W79 Χ H33 mm
Package size：L205ΧW135ΧH45mm
Net Weight：168g
Gross Weight：392g
Remote Control:
Working temperature：-30℃~+60℃
Power supply mode：2pcs NO.7 Battery
Supply voltage：3V
Static power consumption：<0.09mW
Static current：10uA
Operating current：15mA
Remote-controlled distance：>20M
Stand-by time：6 months
External dimension:
Remote control Function instruction:
changing models are as below:
Connection Instruction:
DC+： For power input +（power supply voltage12v-24v）
DC-： For power input -
V+： For Load Common anode
R/CH1： Load output Red channel
G/CH2： Load output Green channel
B/CH3： Load output Blue channel
Power： Red indicating light is for power light，when the power on it will be turn on.
Receiver： Green indicating light, normally it will be in the state of OFF,it will be twinkle
when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be
twinkle in a Fixed frequency to indicate the user.
Typical Applications:
Notes:
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above（to connect the load wire first, than to connect with the power），In the process of operation please avoid short circuit.
3. This product warranty is 24 month，But not including the damage by people and other reason caused by over load working.
Product Features:
This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
Basic parameters:
Basic parameters
Product Name: DMX512 Decoder
Supply voltage: DC12-24V
Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W )
Output current: Max.8A Per Channel
Output Power 1:12V:<288W, 24V:<576W (3 channels)
Output Power 2:12V:<384W, 24V:<768W (4 channels)
Operating temperature: -20-60C
Controller size: L166*W67*H41(mm)
Box size: L176*W84*H50(mm)
Net weight: 360g
Gross weight: 408g
DMX512 standard: DMX512/1990
Control mode: button control, 512 console control
Accessories: A pair of XLR plugs
Package List:
1 * DMX Decoder
1 * Male and female XLR connectors
1 * User manual
The Maxxyz Wing System can be placed on the left or right side of the main console. Multiple Wings can be placed on both sides of the main console, to give you the ultimate customized solution to your show. Use of multiple Wings is simple, as each is connected to each other, and simply linked together for further functionality.
* Modular design for future expansion
* Full playback capabilities, identical in layout to Maxxyz console
* LCD buttons with customizable text
* Motorized faders
* Easily connects to Maxxyz or Maxxyz PC via USB
* Smart design allows for operation left or right of the main console
* Sturdy and robust construction
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Remote control Function instruction:
changing models are as below:
Connection Instruction:
DC+： For power input +（power supply voltage12v-24v）
DC-： For power input -
V+： For Load Common anode
R/CH1： Load output Red channel
G/CH2： Load output Green channel
B/CH3： Load output Blue channel
Power： Red indicating light is for power light，when the power on it will be turn on.
Receiver： Green indicating light, normally it will be in the state of OFF,it will be twinkle
when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be
twinkle in a Fixed frequency to indicate the user.
Typical Applications:
Notes:
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above（to connect the load wire first, than to connect with the power），In the process of operation please avoid short circuit.
3. This product warranty is 24 month，But not including the damage by people and other reason caused by over load working.
Reviews
There are no reviews yet.