Weight | 20.00 kg |
---|
JEDIA JDM ZA 6600 Amplifier 100V/ 6x100W Zones
Quick Comparison
JEDIA JDM ZA 6600 Amplifier 100V/ 6x100W Zones remove | DAP AUDIO D2352 IMIX-5.3 5 Channel 4U install mixer, 3 zones remove | JBL CSM-32 PUBLIC ADDRESS MIXER remove | INTERM L-2400 AMPLIFIER 2X750W remove | INTERM R-150 PLUS AMPLIFIER 2X75W remove | TASCAM MZ-223 Industrial-grade Audio 3 Zone Mixer remove | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | JEDIA JDM ZA 6600 Amplifier 100V/ 6x100W Zones remove | DAP AUDIO D2352 IMIX-5.3 5 Channel 4U install mixer, 3 zones remove | JBL CSM-32 PUBLIC ADDRESS MIXER remove | INTERM L-2400 AMPLIFIER 2X750W remove | INTERM R-150 PLUS AMPLIFIER 2X75W remove | TASCAM MZ-223 Industrial-grade Audio 3 Zone Mixer remove | ||||||||||||
Image | ||||||||||||||||||
SKU | ZA 6600 | D2352 | CSM-32 | L-2400 | R-150 PLUS | MZ-223 | ||||||||||||
Rating | ||||||||||||||||||
Price | €1,187.00 incl. GR VAT | €355.87 incl. GR VAT | €472.00 incl. GR VAT | €1,198.00 incl. GR VAT | €459.00 incl. GR VAT | €449.00 incl. GR VAT | ||||||||||||
Stock | Out of stock | Available on backorder | Available on backorder | Available on backorder | Available on backorder | Available on backorder | ||||||||||||
Availability | Out of stock | Available on backorder | Available on backorder | Available on backorder | Available on backorder | Available on backorder | ||||||||||||
Add to cart | ||||||||||||||||||
Description | ||||||||||||||||||
Content | • Master outputs with 3 way tone control • Special front input for phone/mp3 devices • Zone control for 3 balanced outputs • 1 Mic, 7 Line, 2 Phono inputs The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device. Specifications Input channels: 1 x Microphone, combo XLR/Jack 7 x Line, RCA 2 x Phono, RCA 1 x Phone, 3,5mm jack Output channels: 3 x Master (Balanced), XLR/RCA 1 x Headphones, 6.3mm Jack Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB Frequency response: 20Hz – 20Khz T.H.D.: |
The JBL Commercial CSM-32 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-32 features three stereo music inputs with gain control and clip LEDs, and two stereo outputs with active crossovers and dedicated subwoofer outputs. | L2400 750W-750W 4ohm (500W-500W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation. |
Power Output Level R-150 PLUS
STEREO
BRIDGED MONO Frequency Response 20Hz- 20kHz, ±0.5dB Convection Cooled SoftStart Protection System Balanced 10kΩ@0.775V Inputs
| The MZ-223 allows multiple audio sources to be mixed, segregated, and routed to 3 independent zones or destinations using familiar volume sliders and assignment buttons. Input signals can be inserted via 5 audio channels, each consisting of 2 sets of unbalanced RCA stereo pairs. A total of 10 sets of RCA inputs are provided. Channels 1 and 2 can be set to accommodate phono-level signals for use with a turntable. In addition located conveniently on the front panel, 2 mic-compatible
The independent 3-zone outputs each have a combination of balanced professional XLR or RCA unbalanced configurations for long runs or connection to common residential power amplifiers or speakers. This flexibility, for example, allows music to be routed to ZONE1, ambient noise or natural sounds to ZONE2, a separate music track or a voice announcement can be routed to ZONE3, while the convenient "Talkover” function will automatically lower any mixed channel source so the microphone can be heard while speaking.
| |||||||||||||
Weight | 20.00 kg | 2.50 kg | 2.00 kg | 15.60 kg | 7.20 kg | 4.00 kg | ||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||
Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.