KRAMER PT-102S 1:2 s-Video Distribution Amplifier

INPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUT:    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    150MHz (Y).
DIFF. GAIN:    0.03%.
DIFF. PHASE:    0.03Deg.
K-FACTOR:   

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter

INPUT: 4-pinterminalblock. OUTPUTS:s-Video,1-Vpp/75ohm; (Y), 0.3Vpp/75ohm;(c)ona4pconnector. VIDEO BAND WIDTH (-3dB):8.4MHz,(Y)at100m.GAIN RANGE:-2.4to+6.5dB(Y),-2.7to15.6dB,(EQ.),-5.8to+7.8dB(C). NON-LINEARITY: 0.07%.DIFF.GAIN:0.04%.VIDEO S/NRATIO: Better than 60dB. POWER SOURCE: 12VDC40mA. DIMENSIONS:12cmx7.5cmx2.5cm(4.7”x2.95”x0.98”,W,D,H.). WEIGHT: 0.26kg.(0.58lbs.)Approx. ACCESSORIES: Power supply, mounting bracket.  OPTIONS: ModelVA-50Ppower supply with six12VDCoutlets.RK-T1,RK-T3,19”rack adapters

NPUT:    1 composite video 1Vpp/75Ω on a BNC connector;1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3Vpp/75Ω on a 4-pin connector.
OUTPUTS:    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector.
MAX. VIDEO OUTPUT:    2.5Vpp/75Ω.
VIDEO BANDWIDTH (-3dB):    10MHz (YC to CV).
DIFF. PHASE:    0.3Deg.
DIFF. GAIN:    0.36%.
K-FACTOR:    0.05% (YC to CV).
LUMA S/N RATIO:    79dB.
POWER SOURCE:    12V DC, 110mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.6kg (1.3lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

Input    1 mixed video-audio signal 1Vpp/75? on a BNC type connector.
Outputs    1 composite video, 1Vpp/75? on a BNC type connector.1 audio stereo (L, R), 1Vpp/100? on RCA connectors.
Bandwidth (-3Db)    7 MHz.
Diff. Gain    0.4 %.
Diff. Phase    0.17 Deg.
Video S/N Ratio    72 dB.
Power Source    230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.4 VA.
Dimensions     16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”, W, D, H.).
Weight     0.78 kg. (1.7 lbs.) approx.
Accessories    Power cord.
Options    RK-50RN rack adapter holds two units in two vertical rack spaces.

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.