M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with […]
M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with reference to the several possible applications. The M 502 has a controlled coverage through its twin 5″ and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution. The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.
APPLICATIONS
• Multimedia Environments
• Conference Halls
• Pubs
• Café
• Background and Foreground Business Music
• Delay Fill
• Place of Worships
• Under-Balcony
General Specs
High Quality 2-way passive loudspeaker
2 x 5.5″ woofer, vented
1 x 1″ in driver, on 90°x90° CD horn
High Power Handling ‘Low Impedance Compensated Crossover\’, with electronic protection for the driver
100W AES power handling
Steel Front Grille with robust double mesh polyester clothing
Rotatable RCF front logo
Installation points are available on the rear panel, top and bottom
All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:80Hz ÷ 20000 Hz
Max SPL @ 1m:116dB
Horizontal coverage angle:90°
Vertical coverage angle:90°
Directivity index; Q:9
System Sensitivity:92dB
Nominal Impedance:8Ω
Power Handling:100W
Peak Power Handling:400W
Recommended Amplifier:200W
Protections:Dynamic
Crossover frequencies:2300Hz
Cabinet Specs
Cabinet Material:MDF 12 mm
Hardware:6 x M6, 2 x M10
Grille:Steel, with a robust double mesh polyester clothing
Colour:Black
Size/Weight
Height:470 / 18.50mm/inch
Width:175 / 6.88mm/inch
Depth:185 / 7.28mm/inch
Net Weight:7.5 / 16.5kg/lbs
System Parameters
Compression Driver:1″ HF driver, 1.5″ voice coil
Nominal Impedance:8Ω
Input Power Rating:25W AES
Sensitivity:106dB
Woofer:2 x 5.5″ Woofer, 1.2″ voice coil
Nominal Impedance:16Ω
Input Power Rating:80W AES
Sensitivity:88dB
Weight
7.50 kg
Reviews
There are no reviews yet.
Be the first to review “RCF M602 2-way Passive speaker- 2×5.5″ – 1″ – 90×90°horn – 130W” Cancel reply
M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with reference to the several possible applications. The M 502 has a controlled coverage through its twin 5" and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution. The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.
APPLICATIONS
• Multimedia Environments
• Conference Halls
• Pubs
• Café
• Background and Foreground Business Music
• Delay Fill
• Place of Worships
• Under-Balcony
General Specs
High Quality 2-way passive loudspeaker
2 x 5.5" woofer, vented
1 x 1" in driver, on 90°x90° CD horn
High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
100W AES power handling
Steel Front Grille with robust double mesh polyester clothing
Rotatable RCF front logo
Installation points are available on the rear panel, top and bottom
All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:80Hz ÷ 20000 Hz
Max SPL @ 1m:116dB
Horizontal coverage angle:90°
Vertical coverage angle:90°
Directivity index; Q:9
System Sensitivity:92dB
Nominal Impedance:8Ω
Power Handling:100W
Peak Power Handling:400W
Recommended Amplifier:200W
Protections:Dynamic
Crossover frequencies:2300Hz
Cabinet Specs
Cabinet Material:MDF 12 mm
Hardware:6 x M6, 2 x M10
Grille:Steel, with a robust double mesh polyester clothing
Colour:Black
Size/Weight
Height:470 / 18.50mm/inch
Width:175 / 6.88mm/inch
Depth:185 / 7.28mm/inch
Net Weight:7.5 / 16.5kg/lbs
System Parameters
Compression Driver:1" HF driver, 1.5" voice coil
Nominal Impedance:8Ω
Input Power Rating:25W AES
Sensitivity:106dB
Woofer:2 x 5.5" Woofer, 1.2" voice coil
Nominal Impedance:16Ω
Input Power Rating:80W AES
Sensitivity:88dB
The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
The DYNACORD VL262W 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262W is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood
85 Hz to 22 kHz frequency range (-10 dB)
50 watts continuous program power capacity
86 dB sensitivity (1W/1m)
8 ohms nominal impedance
3.5 kHz crossover frequency
High-Impact Polystyrene (HIPS) enclosure
Spring-loaded input terminals
Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 2 x 4" Installation Monitor Passive:
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.