Mackie C 200 200W Rms-8Ω Passive 2-way Loudspeaker

Mackie C200 200W Rms-8Ω Passive 2-way Loudspeaker

Looking for renowned Mackie sound quality in a portable, lightweight package? Want to instantly upgrade the sound of your existing powered mixer or amplifier without breaking the bank? Our C200 2-Way Portable Passive Loudspeakers put the superior clarity, wide dispersion, and legendary ergonomics of the SRM Series within reach of any serious musician, DJ, or small club. These compact-yet-loud speakers can be pole-mounted for use as a small full-range PA system, combined with subwoofers as needed, and even employed as high-quality passive floor monitors. 

Features:

Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer 
Wide, even dispersion pattern means everyone in the audience hears great sound 
Asymmetrical cabinet design for best acoustical response 
Integrated low-impedance compensated crossover and transducer protection 
Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points 
500W peak power handling at 8 ohms 
Three setup configurations: pole mount, flyable and wedge 
Passive version of the best-selling SRM350 

ACOUSTIC PERFORMANCE
 
 
SYSTEM SPECIFICATIONS::

• Frequency Response (–3 dB): 89Hz – 20kHz
• Frequency Range (–10 dB): 59Hz – 22kHz
• Maximum SPL Long-term @ 1m: 118dB
• Crossover Frequency: 1800Hz
• Input Type: Speakon®-style 1/4-inch TS phone jack
• Input Impedance: 8 ohms
• Power Handling: (RMS) 200 watts, (Peak) 500 watts
• Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
• Wide, even dispersion pattern means everyone in the audience hears great sound
• Asymmetrical cabinet design for best acoustical response
• Integrated low-impedance compensated crossover and transducer protection
• Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
• 500W peak power handling at 8 ohms
• Three setup configurations: pole mount, flyable and wedge
• Lightweight 11,8kg

Features

    Hard-suspension bass with Kapton spool
    High-range horn with thermal overload protection
    Integrated high-quality frequency cross-over (not for RSP-18 S)
    Sound characteristics geared especially to heavy-bass sounds like hip hop, techno, house & breaks
    High-performance reserves
    Extremely durable, road-compatible carpeting
    Protective metal corners
    Large carrying shells made of metal
    Sunk-in metal flange for tripods (not RSP-12 M and RSP-30)
    Robust front grid
    Connections via PA pro speaker cable and 6.3 mm jack


Technical Data

    100 watt RMS PA-speaker
    Max. capacity: 200 watt
    Type: 2-way system
    Frequency range: 45 Hz - 20 kHz
    Acoustic pressure: 97 dB
    Speaker: 25 cm (10“) woofer, mid-range and tweeter
    Impedance: 8 ohm
    Dimensions: 530 x 375 x 340 mm
    Weight: 11.5 kg

User\'s manual
Technical drawing

• Passive 2-way bass-reflex installation speaker
• 200 W permanent load capacity
• 118 dB maximum sound-level pressure
• 10" custom woofer and 1" Celestion high-frequency driver
• Rotating CD horn with 80° x 60° dispersion
• For vertical or horizontal use
• speakON-compatible and terminal block input
• 4 x M8 mounting holes
• Shock-resistant front grille for optimum speaker protection
• Extensive range of smart accessories for installation
• Available in black or white

With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.

The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.

Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).

• 38 Hz to 17 kHz frequency range
  (-10 dB)
• 250W pink noise, 500 watts continuous program power capacity
• 120 x 110 degree coverage horn
• 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
• 4 Ohm Bypass
• Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
• Available in black or white (Control 30-WH)
• Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
• Net Weight: 18.9 kg (42 lb)

Passive Reinforcement speaker 300W / 8ohm – 127dB SPL

FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.

The PROMAXX feature-set is matched by the enclosure’s versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet.

Common features:

• bass reflex design cabinet
• 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
• 90°H x 60°V constant directivity horn
• Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles

• Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
• Speakon NL-4 IN and LINK OUT connectors

Passive Reinforcement speaker 300W / 8ohm – 127dB SPL

Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.

For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.

The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the  VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.

Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.

• 2-way, bass reflex design
• Digital Signal Processor with graphic display
• 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
• High efficiency switch mode power supply
• Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push

• ORIGINAL / LIVE The renowned, smooth FBT sound
• VOCAL A special EQ setting to maximise speech intelligibility
• DJ Designed to keep the energy high and your audience dancing
• TOURING The reliability and the roar of the industry’s most popular touring systems
• LOUDNESS The ultimate preset for listening at a medium or low volume
• WARM A special setting to emphasise full-bodied, low-mid frequencies.