| Content |
Mackie C200 200W Rms-8Ω Passive 2-way Loudspeaker
Looking for renowned Mackie sound quality in a portable, lightweight package? Want to instantly upgrade the sound of your existing powered mixer or amplifier without breaking the bank? Our C200 2-Way Portable Passive Loudspeakers put the superior clarity, wide dispersion, and legendary ergonomics of the SRM Series within reach of any serious musician, DJ, or small club. These compact-yet-loud speakers can be pole-mounted for use as a small full-range PA system, combined with subwoofers as needed, and even employed as high-quality passive floor monitors.
Features:
Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
Wide, even dispersion pattern means everyone in the audience hears great sound
Asymmetrical cabinet design for best acoustical response
Integrated low-impedance compensated crossover and transducer protection
Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
500W peak power handling at 8 ohms
Three setup configurations: pole mount, flyable and wedge
Passive version of the best-selling SRM350
ACOUSTIC PERFORMANCE
SYSTEM SPECIFICATIONS::
- Frequency Response (–3 dB): 89Hz – 20kHz
- Frequency Range (–10 dB): 59Hz – 22kHz
- Maximum SPL Long-term @ 1m: 118dB
- Crossover Frequency: 1800Hz
- Input Type: Speakon®-style 1/4-inch TS phone jack
- Input Impedance: 8 ohms
- Power Handling: (RMS) 200 watts, (Peak) 500 watts
- Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
- Wide, even dispersion pattern means everyone in the audience hears great sound
- Asymmetrical cabinet design for best acoustical response
- Integrated low-impedance compensated crossover and transducer protection
- Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
- 500W peak power handling at 8 ohms
- Three setup configurations: pole mount, flyable and wedge
- Lightweight 11,8kg
|
The V10 is a compact, full range, extremely versatile two-way loudspeaker system. It offers substantial power and efficiency for a variety of professional applications that include portable systems, sound reinforcement, permanent installations and supplementary fill for larger systems. The high-frequency section is a constant directivity CMD horn mathematically designed for Coverage Matching Design in relation to the woofer system, loaded on a neodymium compression driver with a 2.5” diaphragm assembly for smooth, controlled dispersion. The low-frequency transducer is a tight, high power 10” mid-bass with a 2.5 ” voice coil
APPLICATIONS
- • Live performance
- • DJ set
- • Rental solutions
- • Permanent installations
General Specs
10" high power, 2.5" voice coil mid bass
1 x 2.5" high power titanium neo compression driver
130 dB max SPL
350 Watt AES
High output, response down to 55 Hz
Birch plywood cabinet
Weather resistant, textured, polyurea finish
Epoxy powder coated front grille
TRANSDUCERS
- Compression Driver:0“, 1.7" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:100 W PEAK, 50 WW AES
- Sensitivity:108dB
- Woofer:6“, 1.8" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:300 W PEAK, 150 WW AES
- Sensitivity:94dB
TRANSDUCERS
- Compression Driver:4“, 2.5" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:180 W PEAK 90 WW AES
- Sensitivity:98dB
- Woofer:10“, 2.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:500 W PEAK, 250 WW AES
- Sensitivity:110dB
Acoustical Specs
Frequency Response -10 dB:55 Hz ÷ 20000 Hz
Max SPL @ 1m:130 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Directivity index; Q:10
System Sensitivity:94 dB
Nominal Impedance:8 Ω
Power Handling:350 W
Peak Power Handling:1400 W
Recommended Amplifier:700 W
Protections:Dynamic
Crossover frequencies:1000 Hz
Cabinet Specs
Cabinet Material:15mm Birch Plywood
Hardware:Pole mount, 13 x M10
Pole Mount/Cap:yes
Grille:Custom perforated steel grille
Colour:black
Size/Weight
Height: 540 / 21.25 mm/inch
Width:340 / 13.38 mm/inch
Depth:333 / 13.11 mm/inch
Net Weight:15 / 33.06 kg/lbs | This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
| Full Range Speaker
- Equipped with: 10" + 1“
- Dispersion: 90° x 60° CD horn
- Power: 300 W RMS
- Impedance: 8 Ohm
- Frequency range: 95 - 19,000 Hz
- Max. SPL: 126 dB
- Flange mount
- 3 x M8 fly points
- 2 Handles
- Connectors: 2 x speaker twist
- Dimensions: 320 x 480 x 290 mm
- Weight: 12.9 kg
|
| 2-Way, 10“
High Power System |
| Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
| Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
| Specifications and Characteristics |
| Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
| Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
| Nominal Impedance |
8 Ohm |
| Power Rating |
|
| (RMS)2 |
300W |
| Program2 |
600W |
| Peak2 |
1200W |
| Horizontal Coverage |
(-6dB) 90? |
| Vertical Coverage |
(-6dB) 40? |
| Sensitivity (dB/1w@1m) |
97dB SPL |
| SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
| Connectors |
2 Neutrik NL-4 Connectors on steel plate |
| Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
| Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
| Recommended Sub-woofer |
Space PMS-15 |
| Enclosure and Installation |
| Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
| Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
| Handle |
On top of the cabinet. |
| Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
| Net Weight |
18Kg (39.6 pounds) |
| Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
| Notes |
|
| 1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
| Features |
|---|
| Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | | Stainless steel bracket | | One 10" high-output LF transducer with 2" voice coil | | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | | 90° x 40° constant directivity horn | | Built in passive crossover and selectable line transformer | | 10° X 20° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | | LICC (Low Impedance Compensated Crossover) network | |
12 brass suspension points (M8)
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 118 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 11 | | | System Sensitivity: | 95 dB | | | Nominal Impedance: | 16 Ω | | | Power Handling: | 200 Watt | | | Peak Power Handling: | 800 Watt | | | Recommended Amplifier: | 400 | | | Protections: | Dinamyc | | | Crossover frequencies: | 2000 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.5" HF driver, 1" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 106 dB | | | Woofer: | 10" woofer, 2.5" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 180 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 5m, 4-adriges Neopren Kabel | | | Constant voltage transformer: | 70/100 | | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
| CABINET |
|---|
| Cabinet Material: | Polyethylene rotomoulded | | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Grey | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 350 / 13.78 mm/inch | | | Width: | 350 / 13.78 mm/inch | | | Depth: | 320 / 12.60 mm/inch | | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
Reviews
There are no reviews yet.