Mackie C 200 200W Rms-8Ω Passive 2-way Loudspeaker

Mackie C200 200W Rms-8Ω Passive 2-way Loudspeaker

Looking for renowned Mackie sound quality in a portable, lightweight package? Want to instantly upgrade the sound of your existing powered mixer or amplifier without breaking the bank? Our C200 2-Way Portable Passive Loudspeakers put the superior clarity, wide dispersion, and legendary ergonomics of the SRM Series within reach of any serious musician, DJ, or small club. These compact-yet-loud speakers can be pole-mounted for use as a small full-range PA system, combined with subwoofers as needed, and even employed as high-quality passive floor monitors. 

Features:

Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer 
Wide, even dispersion pattern means everyone in the audience hears great sound 
Asymmetrical cabinet design for best acoustical response 
Integrated low-impedance compensated crossover and transducer protection 
Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points 
500W peak power handling at 8 ohms 
Three setup configurations: pole mount, flyable and wedge 
Passive version of the best-selling SRM350 

ACOUSTIC PERFORMANCE
 
 
SYSTEM SPECIFICATIONS::

• Frequency Response (–3 dB): 89Hz – 20kHz
• Frequency Range (–10 dB): 59Hz – 22kHz
• Maximum SPL Long-term @ 1m: 118dB
• Crossover Frequency: 1800Hz
• Input Type: Speakon®-style 1/4-inch TS phone jack
• Input Impedance: 8 ohms
• Power Handling: (RMS) 200 watts, (Peak) 500 watts
• Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
• Wide, even dispersion pattern means everyone in the audience hears great sound
• Asymmetrical cabinet design for best acoustical response
• Integrated low-impedance compensated crossover and transducer protection
• Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
• 500W peak power handling at 8 ohms
• Three setup configurations: pole mount, flyable and wedge
• Lightweight 11,8kg

• Equipped with: 10" + 1“
• Dispersion: 90° x 60° CD horn
• Power: 300 W RMS
• Impedance: 8 Ohm
• Frequency range: 95 - 19,000 Hz
• Max. SPL: 126 dB
• Flange mount
• 3 x M8 fly points
• 2 Handles
• Connectors: 2 x speaker twist
• Dimensions: 320 x 480 x 290 mm
• Weight: 12.9 kg

Specifications

Technical data

Speaker Type    2-Way Passive Speaker
Acoustical data

Nominal Power Rating    300 W/RMS
Program Power Rating    600 W/RMS
Peak Power Rating    900 W/RMS
Impedance    8 Ohms
Sensitivity 1W@1m    96 dB
Frequency Response [-10dB]    70 - 20.000 Hz
Frequency Response [+/- 3dB]    90 - 19.000 Hz
Max SPL    127 dB
HF    1 "
Type HF  Compression Driver
Voice Coil HF    1.5 "
Driver Protection    PTC
Directivity    90X70 °
Horn    CD Horn Aluminium
Rotatable Horn    Yes
Crossover Frequency (passive)    1800 Hz
Slope MF-HF    18 dB/Octave
LF    10 "
Voice Coil LF    2 "
Input Section

Signal Input    1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output    1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics

Housing    Multiplex birch plywood
Housing Design    Multifunctional
Color    Black
Surface Texture    Textured acrylic lacquer
Handles    1x on back
Pole Mount    36mm
Angles Up    Monitore use 45 °
Front Grille    1.5 mm metall grille with acoustic foam in back
Rigging Points    12 x M8
Width    320 mm (12.8 in)
Height    508 mm (20.32 in)
Depth    320 mm (12.8 in)
Weight    14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components

• Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker
• Power handling: 150 Watts (RMS); 300 Watts (Program)
• Frequency response: 65 Hz ~ 20 KHz
• High sound pressure level, 96 dB SPL @ 1W / 1M
• 10' heavy-duty woofer and piezo tweeter 8 ohm nominal load
• Built-in handle
• 35 mm stand adapter built-in
• Dual 1/4' phone jacks

User\'s manual
Technical drawing

• Passive 2-way bass-reflex installation speaker
• 200 W permanent load capacity
• 118 dB maximum sound-level pressure
• 10" custom woofer and 1" Celestion high-frequency driver
• Rotating CD horn with 80° x 60° dispersion
• For vertical or horizontal use
• speakON-compatible and terminal block input
• 4 x M8 mounting holes
• Shock-resistant front grille for optimum speaker protection
• Extensive range of smart accessories for installation
• Available in black or white

With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.

The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.

Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).

The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.

The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)