Mackie MR524 – 5″ Powered Studio Monitor

149.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The MR524 Studio Monitor from Mackie is a powered 5″ 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass […]

 

Read more

The MR524 Studio Monitor from Mackie is a powered 5″ 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response.

The MR524 is equipped with matched amps and drivers for an optimized 50W Class-A/B bi-amplified system. The speaker can also be optimized to your mixing environment with the adjustable acoustic space filters designed to maintain a flat response in typical placement configurations. Additionally, a high-frequency filter applies a boost or cut to compensate for particularly bright- or dull-sounding rooms.

The MR524 has been designed with flexibility in mind, featuring XLR, TRS and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MRS10 studio subwoofer can be added for a more powerful, extended low end.

  • Designed for superior mix translation and accuracy for professional results in any studio
  • Equipped with Mackie’s proven logarithmic waveguide design
    • Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
    • Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
  • 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
  • 5” polypropylene woofer delivers responsive, dynamic low frequency response
  • 50-watts of bi-amplified Class A/B amplification
  • Frequency response: 45 Hz – 20 kHz
  • Optimize MR monitors for your mixing environment
    • Adjustable acoustic space filters maintain flat response in typical placement configurations
    • HF filter applies boost or cut to compensate for particularly dull- or bright-sounding rooms
  • Professional all-wood cabinet design built to last and look great in any studio
    • Custom-designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response
  • Flexible inputs for simple connection to almost any audio source
  • Acoustically optimized with sound-tightening acoustic absorption material
  • Add the optional MRS10 studio subwoofer for powerful, deep low-frequency extension, well suited for electronic music, hip-hop and more

Frequency Response

57 Hz to 20 kHz, (-3 dB)
45 Hz to 20 kHz, (-10 dB)
SPL 102 dB SPL @ 3.3\’ / 1.0 m (+4 dBu into balanced input)
Maximum SPL 108 dB SPL @ 3.3\’ / 1.0 m (per pair)
Transducer Low Frequency: 5.25″ / 133 mm (polypropylene-coated woofer)
High Frequency: 1.0″ / 25 mm (silk dome tweeter)
Power 50 W
Crossover Crossover Frequency: 2 kHz
Controls and Processing Power
Level
HF-boost/cut
Acoustic space control
AC Power 100 to 120 VAC
Enclosure Rugged all-wood design, internal acoustic absorption material, minimum-diffraction molded baffle, custom-tuned zero-turbulence rear port, logarithmic waveguide, and textured finish
Dimensions 11.1 x 7.1 x 8.7″ / 282.0 x 180.0 x 221.0 mm
Weight 10.2 lb / 4.6 kg
Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “Mackie MR524 – 5″ Powered Studio Monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

Mackie MR524 - 5" Powered Studio Monitor removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeADAM S2X Active Studio Monitor 250W removeADAM A8X Active Studio Monitor 150W remove
NameMackie MR524 - 5" Powered Studio Monitor removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeADAM S2X Active Studio Monitor 250W removeADAM A8X Active Studio Monitor 150W remove
Image
SKU149.270Twin6 BeE005760GTS2XA8X
Rating
Price 149.00 incl. GR VAT1,675.00 incl. GR VAT 221.00 incl. GR VAT 204.80 incl. GR VAT 1,394.99 incl. GR VAT 1,045.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe MR524 Studio Monitor from Mackie is a powered 5" 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response. The MR524 is equipped with matched amps and drivers for an optimized 50W Class-A/B bi-amplified system. The speaker can also be optimized to your mixing environment with the adjustable acoustic space filters designed to maintain a flat response in typical placement configurations. Additionally, a high-frequency filter applies a boost or cut to compensate for particularly bright- or dull-sounding rooms. The MR524 has been designed with flexibility in mind, featuring XLR, TRS and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MRS10 studio subwoofer can be added for a more powerful, extended low end.
  • Designed for superior mix translation and accuracy for professional results in any studio
  • Equipped with Mackie’s proven logarithmic waveguide design
    • Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
    • Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
  • 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
  • 5” polypropylene woofer delivers responsive, dynamic low frequency response
  • 50-watts of bi-amplified Class A/B amplification
  • Frequency response: 45 Hz – 20 kHz
  • Optimize MR monitors for your mixing environment
    • Adjustable acoustic space filters maintain flat response in typical placement configurations
    • HF filter applies boost or cut to compensate for particularly dull- or bright-sounding rooms
  • Professional all-wood cabinet design built to last and look great in any studio
    • Custom-designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response
  • Flexible inputs for simple connection to almost any audio source
  • Acoustically optimized with sound-tightening acoustic absorption material
  • Add the optional MRS10 studio subwoofer for powerful, deep low-frequency extension, well suited for electronic music, hip-hop and more
Frequency Response
57 Hz to 20 kHz, (-3 dB) 45 Hz to 20 kHz, (-10 dB)
SPL 102 dB SPL @ 3.3\' / 1.0 m (+4 dBu into balanced input)
Maximum SPL 108 dB SPL @ 3.3\' / 1.0 m (per pair)
Transducer Low Frequency: 5.25" / 133 mm (polypropylene-coated woofer) High Frequency: 1.0" / 25 mm (silk dome tweeter)
Power 50 W
Crossover Crossover Frequency: 2 kHz
Controls and Processing Power Level HF-boost/cut Acoustic space control
AC Power 100 to 120 VAC
Enclosure Rugged all-wood design, internal acoustic absorption material, minimum-diffraction molded baffle, custom-tuned zero-turbulence rear port, logarithmic waveguide, and textured finish
Dimensions 11.1 x 7.1 x 8.7" / 282.0 x 180.0 x 221.0 mm
Weight 10.2 lb / 4.6 kg

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included


PRICE PER UNIT

 

S2X

The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.

The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.

 

Review at a glance: "Sonic sensation“

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)

Woofer
Number1
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response35 Hz - 50 kHz
THD > 80 Hz≤0.8 %
Long term output≥110 dB
Max. peak≥120 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight23.8 lb (10,8 kg)
Magnetically shieldedOptional
Height x Width x Depth14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



Weight5.00 kg14.00 kg7.50 kg4.30 kg11.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 14.00 kg
Weight 7.50 kg
Weight 4.30 kg
Weight 11.00 kg
Weight 13.00 kg