Mackie MR524 – 5″ Powered Studio Monitor

149.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The MR524 Studio Monitor from Mackie is a powered 5″ 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass […]

 

Read more

The MR524 Studio Monitor from Mackie is a powered 5″ 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response.

The MR524 is equipped with matched amps and drivers for an optimized 50W Class-A/B bi-amplified system. The speaker can also be optimized to your mixing environment with the adjustable acoustic space filters designed to maintain a flat response in typical placement configurations. Additionally, a high-frequency filter applies a boost or cut to compensate for particularly bright- or dull-sounding rooms.

The MR524 has been designed with flexibility in mind, featuring XLR, TRS and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MRS10 studio subwoofer can be added for a more powerful, extended low end.

  • Designed for superior mix translation and accuracy for professional results in any studio
  • Equipped with Mackie’s proven logarithmic waveguide design
    • Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
    • Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
  • 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
  • 5” polypropylene woofer delivers responsive, dynamic low frequency response
  • 50-watts of bi-amplified Class A/B amplification
  • Frequency response: 45 Hz – 20 kHz
  • Optimize MR monitors for your mixing environment
    • Adjustable acoustic space filters maintain flat response in typical placement configurations
    • HF filter applies boost or cut to compensate for particularly dull- or bright-sounding rooms
  • Professional all-wood cabinet design built to last and look great in any studio
    • Custom-designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response
  • Flexible inputs for simple connection to almost any audio source
  • Acoustically optimized with sound-tightening acoustic absorption material
  • Add the optional MRS10 studio subwoofer for powerful, deep low-frequency extension, well suited for electronic music, hip-hop and more

Frequency Response

57 Hz to 20 kHz, (-3 dB)
45 Hz to 20 kHz, (-10 dB)
SPL 102 dB SPL @ 3.3\’ / 1.0 m (+4 dBu into balanced input)
Maximum SPL 108 dB SPL @ 3.3\’ / 1.0 m (per pair)
Transducer Low Frequency: 5.25″ / 133 mm (polypropylene-coated woofer)
High Frequency: 1.0″ / 25 mm (silk dome tweeter)
Power 50 W
Crossover Crossover Frequency: 2 kHz
Controls and Processing Power
Level
HF-boost/cut
Acoustic space control
AC Power 100 to 120 VAC
Enclosure Rugged all-wood design, internal acoustic absorption material, minimum-diffraction molded baffle, custom-tuned zero-turbulence rear port, logarithmic waveguide, and textured finish
Dimensions 11.1 x 7.1 x 8.7″ / 282.0 x 180.0 x 221.0 mm
Weight 10.2 lb / 4.6 kg
Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “Mackie MR524 – 5″ Powered Studio Monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

Mackie MR524 - 5" Powered Studio Monitor removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
NameMackie MR524 - 5" Powered Studio Monitor removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
Image
SKU149.270040050CMS 50Solo6 BeTwin6 BeMYTHO8
Rating
Price 149.00 incl. GR VAT 155.00 incl. GR VAT 565.00 incl. GR VAT 995.00 incl. GR VAT1,675.00 incl. GR VAT 976.50 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe MR524 Studio Monitor from Mackie is a powered 5" 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features a logarithmic waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response. The MR524 is equipped with matched amps and drivers for an optimized 50W Class-A/B bi-amplified system. The speaker can also be optimized to your mixing environment with the adjustable acoustic space filters designed to maintain a flat response in typical placement configurations. Additionally, a high-frequency filter applies a boost or cut to compensate for particularly bright- or dull-sounding rooms. The MR524 has been designed with flexibility in mind, featuring XLR, TRS and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MRS10 studio subwoofer can be added for a more powerful, extended low end.
  • Designed for superior mix translation and accuracy for professional results in any studio
  • Equipped with Mackie’s proven logarithmic waveguide design
    • Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
    • Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
  • 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
  • 5” polypropylene woofer delivers responsive, dynamic low frequency response
  • 50-watts of bi-amplified Class A/B amplification
  • Frequency response: 45 Hz – 20 kHz
  • Optimize MR monitors for your mixing environment
    • Adjustable acoustic space filters maintain flat response in typical placement configurations
    • HF filter applies boost or cut to compensate for particularly dull- or bright-sounding rooms
  • Professional all-wood cabinet design built to last and look great in any studio
    • Custom-designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response
  • Flexible inputs for simple connection to almost any audio source
  • Acoustically optimized with sound-tightening acoustic absorption material
  • Add the optional MRS10 studio subwoofer for powerful, deep low-frequency extension, well suited for electronic music, hip-hop and more
Frequency Response
57 Hz to 20 kHz, (-3 dB) 45 Hz to 20 kHz, (-10 dB)
SPL 102 dB SPL @ 3.3\' / 1.0 m (+4 dBu into balanced input)
Maximum SPL 108 dB SPL @ 3.3\' / 1.0 m (per pair)
Transducer Low Frequency: 5.25" / 133 mm (polypropylene-coated woofer) High Frequency: 1.0" / 25 mm (silk dome tweeter)
Power 50 W
Crossover Crossover Frequency: 2 kHz
Controls and Processing Power Level HF-boost/cut Acoustic space control
AC Power 100 to 120 VAC
Enclosure Rugged all-wood design, internal acoustic absorption material, minimum-diffraction molded baffle, custom-tuned zero-turbulence rear port, logarithmic waveguide, and textured finish
Dimensions 11.1 x 7.1 x 8.7" / 282.0 x 180.0 x 221.0 mm
Weight 10.2 lb / 4.6 kg

Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

 

Specifications
Frequency response (+/-3dB) : 55Hz - 28kHz
Maximum SPL : 107dB SPL (peak @ 1m)

Input :

Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA

HF amplifier stage : 50W RMS, class AB
LF amplifier stage : 80W RMS, class AB

Electric supply :

Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord

Adjustment :

- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch

Indicators :

Power ON / OFF LED
Standby / ON LED
Audio Clip LED

Woofer : 5" Focal drive unit, Polyglass cone
Tweeter : Aluminum/Magnesium inverted dome Focal tweeter
Shielding : Integral by cancellation magnet
Construction : Reinforced and damped Aluminum cabinet

Finish :

Black powder cabinet

Dimensions with spikes : 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand : 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight : 7.7kg - (17lb)

 

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
 

Acoustical Specifications
Frequency Response -3 dB:35 Hz÷ 20 kHz
Max SPL:116 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:8" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1800 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:430/17 mm/inch 
Width:310/12.2 mm/inch 
Depth:300/11.8 mm/inch 
Net Weight:16.150/35.60 Kg/Lbs

 

Weight5.00 kg3.50 kg7.70 kg11.00 kg14.00 kg20.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 3.50 kg
Weight 7.70 kg
Weight 11.00 kg
Weight 14.00 kg
Weight 20.00 kg